Plastic Thru-Hull Fitting - 1-1/2" - WhiteThese thru-hulls are made with a durable, thermoplastic construction which prevents electrolysis.Caution: Thru-Hull connectors are designed for installation above the water line only.Specifications:
Fits Hose Size: 1-1/2" I.D.
Stem Length: 3-1/2"
Max. Hull Thickness: 1-1/4"
Flange Diameter: 3"
Installation Hose Size: 1-7/8" to 2"
Construction: Polypropylene
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Hose Size: 1-1/2"
Material: Plastic
Box Dimensions: 4"H x 6"W x 9"L WT: 0.2 lbs
UPC: 022697387530
Pole Light Storage Clips New design holds larger (3/4") diameter anti-glare pole lights. Resilient rubber clip holds standard 3/4"-diameter poles. Ideal for storing and protecting plug-in pole lights when mounted in engine wells or lockers. Installs with one #8 fastener.OEM Part Number 7571-1*Sold as a PairWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Type: Mounting Brackets
Box Dimensions: 1"H x 3"W x 6"L WT: 0.1 lbs
UPC: 022697757135
Portable Fuel Tank - 12 Gallon with GaugeAttwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Tough materials and innovative design stand up to harsh marine conditions. A 12-gallon tank is ideal for pontoon boats where more fuel capacity is needed. Includes gauge.Features:
12 Gallon fuel capacity
Compatible with 1/4-inch NPT fuel fittingsHigh-Contrast, easy to read gage
Additional oil and ullage/vapor capacity
EPA Cap with automatic, high-flow vacuum valve
UV-grade multi-layer tank material
Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems
Cap with built-in vacuum valve means no need for manual venting
Meets EPA and CARB (California Air Resources Board) regulations
Complies with all ABYC/NMMA requirements for portable marine fuel tanks
Dimensions:
Length: (inch) 22.75"
Width: (inch) 14.25"
Height: (inch) 14.47"
*No fuel line included Quick Guide (pdf)
Portable Fuel Tank - 12 Gallon without GaugeAttwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Tough materials and innovative design stand up to harsh marine conditions. A 12-gallon tank is ideal for pontoon boats where more fuel capacity is needed.Features:
12 Gallon fuel capacity
Compatible with 1/4-inch NPT fuel fittings
Additional oil and ullage/vapor capacity
EPA Cap with automatic, high-flow vacuum valve
UV-grade multi-layer tank material
Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems
Cap with built-in vacuum valve means no need for manual venting
Meets EPA and CARB (California Air Resources Board) regulations
Complies with all ABYC/NMMA requirements for portable marine fuel tanks
Dimensions:
Length: (inch) 22.75"
Width: (inch) 14.25"
Height: (inch) 14.47"
*No gauge or fuel line included Quick Guide (pdf)
Portable Fuel Tank - 3 Gallon with GaugeAttwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Tough materials and innovative design stand up to harsh marine conditions. A 3-gallon tank is perfect for small outboards. Includes gauge.Features:
3 Gallon fuel capacity
Compatible with 1/4-inch NPT fuel fittingsHigh-Contrast, easy to read gage
Additional oil and ullage/vapor capacity
EPA Cap with automatic, high-flow vacuum valve
UV-grade multi-layer tank material
Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems
Cap with built-in vacuum valve means no need for manual venting
Meets EPA and CARB (California Air Resources Board) regulations
Complies with all ABYC/NMMA requirements for portable marine fuel tanks
Dimensions:
Length: (inch) 16.6"
Width: (inch) 11.45"
Height: (inch) 7.3"
*No fuel line included Quick Guide (pdf)
Portable Fuel Tank - 3 Gallon without GaugeAttwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Tough materials and innovative design stand up to harsh marine conditions. A 3-gallon tank is perfect for small outboards.Features:
3 Gallon fuel capacity
Compatible with 1/4-inch NPT fuel fittings
Additional oil and ullage/vapor capacity
EPA Cap with automatic, high-flow vacuum valve
UV-grade multi-layer tank material
Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems
Cap with built-in vacuum valve means no need for manual venting
Meets EPA and CARB (California Air Resources Board) regulations
Complies with all ABYC/NMMA requirements for portable marine fuel tanks
Dimensions:
Length: (inch) 16.6"
Width: (inch) 11.45"
Height: (inch) 7.3"
*No gauge or fuel line included Quick Guide (pdf)
Portable Fuel Tank - 6 Gallon with GaugeAttwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Rugged materials and innovative design stand up to harsh marine conditions. 6-gallon tank adapts to virtually any outboard engine. Includes gauge.Features:
6 Gallon fuel capacity
Compatible with 1/4" NPT fuel fittings
Additional oil and ullage/vapor capacity
EPA Cap with automatic, high-flow vacuum valve
Cap with built-in vacuum valve means no need for manual venting
High-contrast & easy to read gauge
Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems
Meets EPA and CARB (California Air Resources Board) regulations
Complies with all ABYC/NMMA requirements for portable marine fuel tanks
Dimensions:
Length: (inch) 19.82"
Width: (inch) 13.50"
Height: (inch) 9.16"
*Fuel line is not includedWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)
Portable Fuel Tank - 6 Gallon without GaugeAttwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Rugged materials and innovative design stand up to harsh marine conditions. 6-gallon tank adapts to virtually any outboard engine. Features:
6 Gallon fuel capacity
Compatible with 1/4" NPT fuel fittings
Additional oil and ullage/vapor capacity
EPA Cap with automatic, high-flow vacuum valve
Cap with built-in vacuum valve means no need for manual venting
Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems
Meets EPA and CARB (California Air Resources Board) regulations
Complies with all ABYC/NMMA requirements for portable marine fuel tanks
Dimensions:
Length: (inch) 19.82"
Width: (inch) 13.50"
Height: (inch) 9.16"
*No gauge or fuel line includedWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)
Portable Fuel Tank Cap with Tether - EPA CertifiedHigh-flow valve exceeds OEM engine fuel flow requirements. Be sure your fuel system is safe; the ratchet feature ensures a proper seal while the tether prevents cap loss. Very versatile; designed for 0 to 350 horsepower engines.Features:
Standard 2 ¼ inch neck for convenience
Includes high-flow automatic vacuum valve
Tether Included
Compatible with 8803LP/8806LP/8812LP/8812LLP Tanks
Easy-to-grip cap features ratcheting noise so you know it’s properly sealed
Quick Guide (pdf)
Portable Low Profile Fuel Tank - 12 Gallon with GaugeAttwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Tough materials and innovative design stand up to harsh marine conditions. A 12-gallon tank is ideal for pontoon boats where more fuel capacity is needed. Includes gauge and low profile save space.Features:
12 Gallon fuel capacity
Compatible with 1/4-inch NPT fuel fittings
High-Contrast, easy to read gage
Save space; the low profile is 3 inches lower than regular 12-gallon tanks
Additional oil and ullage/vapor capacity
EPA Cap with automatic, high-flow vacuum valve
UV-grade multi-layer tank material
Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems
Cap with built-in vacuum valve means no need for manual venting
Meets EPA and CARB (California Air Resources Board) regulations
Complies with all ABYC/NMMA requirements for portable marine fuel tanks
Dimensions:
Length: (inch) 24"
Width: (inch) 18"
Height: (inch) 11.61"
*No fuel line included Quick Guide (pdf)
PowerBase Antenna - White Powered Fold-Down Antenna BaseThe intelligent, automated folding Antenna base. PowerBase easily stows and deploys lights and antennas with the push of a button.PowerBase is the only intelligent light/antenna with object detection technology:
SafeGuard Breakaway: In the event of an impact, the powerbase will safely return to a stowed position preventing potential damage to the fiberglass top
SmartDeploy Backdrive: In the event of a blocked deployment, PowerBase senses an obstruction and reverses the light/antenna back to its starting position
PowerBase is designed for worry-free installation and operation from the assembly line to the marina:
Standardized mounting patterns allow for upgradeability
Intuitive control without switch limitations
PowerBase is compatible/built with the leading industry equipment:For use with antennas up to 8 ft. In length (Powerbase Antenna)Compatibility:Compatible with all leading 1-1/4" threaded VHF Antennas (8ft or less in length)Required for installation (not included):
7/32” & 3/4” Drill Bits
#2 Phillips Driver
Marine Grade Sealant
PTFE Lubricant
2x 1-1/4” Fender Washers and 10-24
Nuts (If Through-Hole Mounting)
2-Position SPST Switch (with LED Backlight)
PowerBase Antenna not included
Quick Guide (pdf)Owner's Manual (pdf)
PowerBase Light - Automated Light MountThe intelligent, automated folding light base. PowerBase easily stows and deploys lights and antennas with the push of a button.PowerBase is the only intelligent light/antenna with object detection technology:
SafeGuard Breakaway: In the event of an impact, the powerbase will safely return to a stowed position preventing potential damage to the fiberglass top
SmartDeploy Backdrive: In the event of a blocked deployment, PowerBase senses an obstruction and reverses the light/antenna back to its starting position
PowerBase is designed for worry-free installation and operation from the assembly line to the marina:
Standardized mounting patterns allow for upgradeability
Intuitive control without switch limitations
PowerBase is compatible/built with the leading industry equipment:Available in masthead and all-round configurations featuring Attwood’s LightArmor LED technology (PowerBase Light)Compatibility:Compatible with Attwood LightArmor LED All-Round and Masthead Nav LightsRequired for installation (not included):
7/32” & 3/4” Drill Bits
#2 Phillips Driver
Marine Grade Sealant
PTFE Lubricant
2x 1-1/4” Fender Washers and 10-24
Nuts (If Through-Hole Mounting)
2-Position SPST Switch (with LED Backlight)
PowerBase Light not included
Quick Guide (pdf)Owner's Manual (pdf)
PowerGuard PRO Battery BoxExperience the difference between PowerGuard PRO Series Battery Protection
Upward-facing vents let gases out while reducing water in-take by 94% - vs. PowerGuard 27 Series
Polypropylene composite material is impervious to acid leaks and other external factors
Engineered spill channels direct water away from the battery
With PowerGuard PRO, the battery is always within reach
Folding entry panels provide easy access to the battery terminals without the need to remove the mounting strap
A versatile bidirectional design allows contact from any angle
Ergonomic handles provide more comfort when transporting the battery
PowerGuard PRO takes security seriously
Reinforced mounting hardware ensures the battery and box stay anchored
Spacer blocks are removable to fit Group 24, 27, and 31 batteries
The snap-locking lid gives confidence that the battery will remain secure
Specifications:
Dimensions with Lid Installed - Internal Dimensions (L x W x H): 13-1/8" x 7" x 11"
Outside Dimensions (L x W x H): 21" x 11-1/4" x 11-1/2"
Color/Style: Black/Vented
Quick Guide (pdf)
Primer Bulb - 1/4" Inner Diameter HoseThis Atwood Primer Bulb is engineered and constructed to deliver the most reliable priming and long-term leak-free performance. The exclusive three-layer construction prevents collapse under vacuum and prevents ballooning or bursting under pressure. The low-permeation material prevents fuel evaporation, and this bulb delivers 60 percent more output per pump than leading competitors.Features:
It is intended for use with a 1/4-inch interior diameter hose
Exclusive high-efficiency check-valves deliver faster priming and low fuel restriction (less than 1kPa restriction at 50 liters/hour)
Engineered hose barbs and stainless steel stepless clamps ensure leak-free performance
This bulb is compatible with Ethanol blended fuels, and it is EPA and CARB certified
Specifications:
ID Diameter (inches): 1/4"
Box Dimensions: 2"H x 4"W x 5"L WT: 0.3 lbs
UPC: 022697931474
Primer Bulb - 3/8" Inner Diameter HoseThis Atwood Primer Bulb is engineered and constructed to deliver the most reliable priming and long-term leak-free performance. The exclusive three-layer construction prevents collapse under vacuum and prevents ballooning or bursting under pressure. The low-permeation material prevents fuel evaporation, and this bulb delivers 60 percent more output per pump than leading competitors.Features:
It is intended for use with a 3/8-inch interior diameter hose
Exclusive high-efficiency check-valves deliver faster priming and low fuel restriction (less than 1kPa restriction at 50 liters/hour)
Engineered hose barbs and stainless steel stepless clamps ensure leak-free performance
This bulb is compatible with Ethanol blended fuels, and it is EPA and CARB certified
Specifications:
ID Diameter (inches): 3/8"
Box Dimensions: 3"H x 5"W x 7"L WT: 1.3 lbs
UPC: 022697930385
Quick Guide (pdf)
Primer Bulb - 5/16" Inner Diameter HoseThis Atwood Primer Bulb is engineered and constructed to deliver the most reliable priming and long-term leak-free performance. The exclusive three-layer construction prevents collapse under vacuum and prevents ballooning or bursting under pressure. The low-permeation material prevents fuel evaporation, and this bulb delivers 60 percent more output per pump than leading competitors.Features:
It is intended for use with a 5/16-inch interior diameter hose
Exclusive high-efficiency check-valves deliver faster priming and low fuel restriction (less than 1kPa restriction at 50 liters/hour)
Engineered hose barbs and stainless steel stepless clamps ensure leak-free performance
This bulb is compatible with Ethanol blended fuels, and it is EPA and CARB certified
Specifications:
ID Diameter (inches): 5/16"
Box Dimensions: 5"H x 5"W x 5"L WT: 0.55 lbs
UPC: 022697935168
Quick Guide (pdf)
Prop Wrench Set - Fits 17/32" to 1-1/4" Prop NutsMultiple socket sizes for all prop maintenance.
Offers multiple sockets to fit from 17/32" to 1-1/4", allowing consumers to service multiple props
Built of durable plastic
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Material: Plastic
Box Dimensions: 1"H x 7"W x 16"L WT: 1 lbs
UPC: 022697137074
Pulsar Bi-Color 2-Pin Stowaway Light - 10" StraightAttwood offers a variety of durable, stowaway, combination pole-mounted sidelights for bow mounting. Each features an anodized aluminum pole that raises the light head for visibility above trolling motors, anchors, or other equipment on the bow. When not in use, lights can be removed from the base and stowed, so they won’t interfere with fishing or anchoring.Features:
1-mile, 225° light visibility for boats up to 39.4 ft. (12 m)
Includes 9W wedge base lamp
2-Pin Locking-Collar Pole
Specifications:Pole Length: (inch) 10" straight*Locking collar design is compatible only with LightArmor Plug-In Bases Specifications:
Visible Range (Miles): 1
Box Dimensions: 3"H x 5"W x 16"L WT: 0.4 lbs
UPC: 022697921079
Quick Guide (pdf)
Pulsar Bi-Color 2-Pin Stowaway Light - 10"AngledAttwood offers a variety of durable, stowaway, combination pole-mounted sidelights for bow mounting. Each features an anodized aluminum pole that raises the light head for visibility above trolling motors, anchors, or other equipment on the bow. When not in use, lights can be removed from the base and stowed, so they won’t interfere with fishing or anchoring.Features:
1-mile, 225° light visibility for boats up to 39.4 ft. (12 m)
Includes 9W wedge base lamp
2-Pin Locking-Collar Pole
Specifications:Pole Length: (inch) 10" Angled*Locking collar design is compatible only with LightArmor Plug-In Bases Specifications:
Lens Color: Red/Green
Visible Range (Miles): 1
Box Dimensions: 3"H x 6"W x 17"L WT: 0.35 lbs
UPC: 022697911070
Quick Guide (pdf)
Push/Pull Switch Three-PositionThree-position, off/on/on. For operating running lights and anchor lights separately.These switches have large, easy-to-pull handles. They are commonly used for operating lights. 3/4" diameter chrome-plated knob, brass case. Include screw terminals for connection without a wire lug. For 12-volt D.C. only. Not external ignition protected.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Action: On/On/Off
Color: Chrome Plated
Box Dimensions: 1"H x 4"W x 7"L WT: 0.2 lbs
UPC: 022697759436
Push/Pull Switch Two-PositionTwo-position, off/on. For operating one set of lights or other accessory.These switches have large, easy-to-pull handles. They are commonly used for operating lights. 3/4" diameter chrome-plated knob, brass case. Include screw terminals for connection without a wire lug. For 12-volt D.C. only. Not external ignition protected.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Action: On/Off
Color: Chrome Plated
Box Dimensions: 2"H x 3"W x 7"L WT: 0.3 lbs
UPC: 022697756336
Quick-Release Gunwale Strap 2" x 13'Gunwale straps secure the entire aft section of the boat over the gunwale to the trailer and restrict vertical movement while on the road. Specifications:2 inches wide13 ft. longWebbing:
Strong webbing
Resists rot, oils, gasoline, and most chemicals
Buckle:
Quick-Release (Over-Center) buckle
Strong and secure, yet easy to use
Quick tightening
Cinch tight and secure by depressing buckle handle
Release by lifting the buckle handle
Hook:
J-Hook with snap-closure for secure, easy attachment
Electrostatic Discharge Coating (EDC) finish prevents corrosion
Heavy gauge
Specifications:
Diameter (Inches): 2.00
Length (Feet): 13.0
Box Dimensions: 4"H x 6"W x 9"L WT: 1.15 lbs
UPC: 022697152213
Quick Guide (pdf)
Quick-Release Transom Tie-Down Straps 2" x 4' PairWhen properly secured to transom eyes and trailer, transom straps reduce vertical and lateral movement to safely secure the boat to the trailer. They also reduce the bouncing of the boat on the trailer pads or rollers. Two inches wide for larger tailorable boats.Specifications:
2 inches wide
4 ft. long
Webbing:
Strong webbing
Resists rot, oils, gasoline, and most chemicals
Buckle:
Quick-Release (Over-Center) buckle
Strong and secure, yet easy to use
Quick tightening
Cinch tight and secure by depressing buckle handle
Release by lifting the buckle handle
Hook:
Vinyl-Coated S-Hook to prevent scratching boat or trailer finish
Corrosion resistant
Heavy-gauge
Special Features:
Protective pad behind the buckle to prevent marring and scratches on gel coat and painted surfaces
Hook-N-Loop closure secures the buckle handle in the locked position
Specifications:
Diameter (Inches): 2.00
Length (Feet): 4.00
Box Dimensions: 4"H x 6"W x 8"L WT: 1.75 lbs
UPC: 022697152329
Quick Guide (pdf)
Replacement Cartridge for Tsunami 1200 MK21200 GPH Replacement Attwood Tsunami motor cartridge. For use with Attwood Tsunami MK2 (56 series) Bilge and Aerator pumps. Attwood Tsunami MK2 motor cartridge eliminates air locks.Features:
1200 GPH Replacement Attwood Tsunami motor cartridge
For use with Attwood Tsunami MK2 (56 series) Bilge and Aerator pump
Attwood Tsunami MK2 motor cartridge eliminates air locks
