Stainless Steel Thru-Hull Standard Straight Barbed - 1-1/8" Inner DiameterPolish your image with these beautiful, durable stainless steel fittings. Why specify plastic parts when these fittings will last the life of the boat?Rugged Stainless Construction:
Cast from certified Enhanced 316 Stainless Steel alloy for strength and lifetime corrosion-resistance
All visible areas are polished to a mirror finish, then passivate each part for additional protection
Thick steel sidewalls withstand continual stress and hose flexing
Faster, Simpler Installation:
Each Thru-Hull is available with a new silicone gasket
A channel under the flange holds a bead of sealant, making it easier to apply a trouble-free seal
All models have wrench flats or an end notch to hold as a gripping surface; one installer can tighten all connections from inside the hull
The barbed tail ends provide plenty of room to hold multiple clamps
Stainless Steel Straight Thru-Hulls, BarbedStandard Thread model has a full-length thread for thick hulls and easy tighteningSpecifications:
Hose size: (inch) 1-1/8" inner diameter
Flange Diameter: (inch) 2-1/4"
Thread O.D. (outside diameter): (inch) 1-3/8"
Thread Length: (inch) 2-3/8"
Barb Length: (inch) 1-1/4"
Total Length: (inch) 3-7/8"
Install Hole Saw Size: (inch) 1-1/4"
Thread NPSM: (inch) 1"
Max Hull Thickness: (inch) 1-3/4"
*Stainless Steel Thru-Hull Connectors are designed for installation above the water line only Specifications:
Hose Size: 1-1/8"
Material: Stainless Steel
Box Dimensions: 2"H x 4"W x 7"L WT: 0.85 lbs
UPC: 022697665492
Quick Guide (pdf)
Stainless Steel Thru-Hull Standard Straight Barbed - 3/4" Inner DiameterPolish your image with these beautiful, durable stainless steel fittings. Why specify plastic parts when these fittings will last the life of the boat?Rugged Stainless Construction:
Cast from certified Enhanced 316 Stainless Steel alloy for strength and lifetime corrosion-resistance
All visible areas are polished to a mirror finish, then passivate each part for additional protection
Thick steel sidewalls withstand continual stress and hose flexing
Faster, Simpler Installation:
Each Thru-Hull is available with a new silicone gasket
A channel under the flange holds a bead of sealant, making it easier to apply a trouble-free seal
All models have wrench flats or an end notch to hold as a gripping surface; one installer can tighten all connections from inside the hull
The barbed tail ends provide plenty of room to hold multiple clamps
Stainless Steel Straight Thru-Hulls, BarbedStandard Thread model has a full-length thread for thick hulls and easy tighteningSpecifications:
Hose size: (inch) 3/4" inner diameter
Flange Diameter: (inch) 1-7/8"
Thread O.D. (outside diameter): (inch) 1"
Thread Length: (inch) 2"
Barb Length: (inch) 1-1/4"
Total Length: (inch) 3-3/4"
Install Hole Saw Size: (inch) 1-1/8"
Thread NPSM: (inch) 3/4"
Max Hull Thickness: (inch) 1-5/8"
*Stainless Steel Thru-Hull Connectors are designed for installation above the water line only Specifications:
Hose Size: 3/4"
Material: Stainless Steel
Box Dimensions: 2"H x 3"W x 6"L WT: 0.6 lbs
UPC: 022697665478
Quick Guide (pdf)
Stainless Steel Thru-Hull Standard Straight Barbed - 5/8" Inner DiameterPolish your image with these beautiful, durable stainless steel fittings. Why specify plastic parts when these fittings will last the life of the boat?Rugged Stainless Construction:
Cast from certified Enhanced 316 Stainless Steel alloy for strength and lifetime corrosion-resistance
All visible areas are polished to a mirror finish, then passivate each part for additional protection
Thick steel sidewalls withstand continual stress and hose flexing
Faster, Simpler Installation:
Each Thru-Hull is available with a new silicone gasket
A channel under the flange holds a bead of sealant, making it easier to apply a trouble-free seal
All models have wrench flats or an end notch to hold as a gripping surface; one installer can tighten all connections from inside the hull
The barbed tail ends provide plenty of room to hold multiple clamps
Stainless Steel Straight Thru-Hulls, BarbedStandard Thread model has a full-length thread for thick hulls and easy tighteningSpecifications:
Hose size: (inch) 5/8" inner diameter
Flange Diameter: (inch) 1-7/8"
Thread O.D. (outside diameter): (inch) 1"
Thread Length: (inch) 2"
Barb Length: (inch) 1-1/4"
Total Length: (inch) 3-3/4"
Install Hole Saw Size: (inch) 1-1/8"
Thread NPSM: (inch) 3/4"
Max Hull Thickness: (inch) 1-1/16"
*Stainless Steel Thru-Hull Connectors are designed for installation above the water line only Specifications:
Hose Size: 5/8"
Material: Stainless Steel
Box Dimensions: 2"H x 3"W x 6"L WT: 0.5 lbs
UPC: 022697665461
Quick Guide (pdf)
Standard Carbon CanisterCarbon canister systems utilize an engineered charcoal canister to reduce hydrocarbons entering the atmosphere. Other components of a carbon canister system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. All Attwood carbon canister systems are designed to ensure liquid fuel or water does not reach the canister and are compatible with Jerry Can and marine nozzle refueling.Features:
Brackets OEM Installed
Low permeation shell reduces overall system emissions
Can be mounted in any orientation using brackets provided
EPA / CARB Certified
Fits a 5/8" vent hose
Specifications:
Trailerable Vessel Capacity (EPA Rating): 220 Gallon
Non-Trailerable Vessel Capacity (EPA Rating): 350 Gallon
Trailerable Vessel Capacity (CARB Rating): 176 Gallon
Non-Trailerable Vessel Capacity (CARB Rating): 350 Gallon
*Compatible with Ethanol blended fuels Quick Guide (pdf)
Stainless Steel Flush Mount Rod Holder, Standard Series2" Diameter7.5" LengthAttwood stainless steel rod holders meet the need for the finest in finish, function and durability.
Polished 316 grade stainless steel tube for corrosion-resistance
Gasket Provides water seal around flange
Optional, U.V. resistant, Cover Cap/Gasket closes tube when not in use
U.V. resistant polymer liner protects finish on rod or reel
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Angle: 0 Degrees
Construction: Stainless Steel
Diameter (Inches): 2"
Length (Inches): 7-1/2"
Box Dimensions: 4"H x 5"W x 12"L WT: 1.5 lbs
UPC: 022697663641
Stainless Steel Flush Mount Rod Holder, Standard Series2" Diameter7.5" LengthAttwood stainless steel rod holders meet the need for the finest in finish, function and durability.
Polished 316 grade stainless steel tube for corrosion-resistance
Gasket Provides water seal around flange
Optional, U.V. resistant, Cover Cap/Gasket closes tube when not in use
U.V. resistant polymer liner protects finish on rod or reel
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Angle: 15 Degrees
Construction: Stainless Steel
Diameter (Inches): 2"
Length (Inches): 7-1/2"
Mounting Style: Flush
Box Dimensions: 4"H x 5"W x 12"L WT: 1.5 lbs
UPC: 022697663634
Stainless Steel Flush Mount Rod Holder, Standard Series2" Diameter7.5" LengthAttwood stainless steel rod holders meet the need for the finest in finish, function and durability.
Polished 316 grade stainless steel tube for corrosion-resistance
Gasket Provides water seal around flange
Optional, U.V. resistant, Cover Cap/Gasket closes tube when not in use
U.V. resistant polymer liner protects finish on rod or reel
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Angle: 30 Degrees
Construction: Stainless Steel
Diameter (Inches): 2"
Length (Inches): 7-1/2"
Mounting Style: Flush
Box Dimensions: 4"H x 5"W x 12"L WT: 1.5 lbs
UPC: 022697663627
Stowaway Light w/2-Pin Plug-In Base -12V - 24"Part #: 7100A7Swivel cover on base protects the base socket when light is stowed away. Base extends just 3" below deck. 4"-long x 1-5/8"-wide x 1-3/8"-dia. Provides 2-mile 360 degree illumination for boats up to 65.6' (20m). Includes 911339 base and 9-watt wedge base lamp. Three countersunk holes for #10 fasteners.Features:
24"
2-Pin Standard Pole
2-Mile
360 Degree
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Lens Color: White
Visible Range (Miles): 2nm
Housing: White
Voltage - Input Range (Volts): 12v
LED: No
Box Dimensions: 3"H x 5"W x 27"L WT: 0.8 lbs
UPC: 022697710031
Quick Guide (pdf)
Stowaway Light w/2-Pin Plug-In Base - 12V - 30"Part #: 7100B7Swivel cover on base protects the base socket when light is stowed away. Base extends just 3" below deck. 4"-long x 1-5/8"-wide x 1-3/8"-dia. Provides 2-mile 360 degree illumination for boats up to 65.6' (20m). Includes 911339 base and 9-watt wedge base lamp. Three countersunk holes for #10 fasteners.Features:
30"
2-Pin Standard Pole
2-Mile
360 Degree
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Lens Color: White
Visible Range (Miles): 2nm
Housing: White
Voltage - Input Range (Volts): 12v
LED: No
Box Dimensions: 3"H x 5"W x 36"L WT: 0.9 lbs
UPC: 022697710086
Quick Guide (pdf)
Stowaway Light w/2-Pin Plug-In Base - 12V - 36"Part #: 7100C7Swivel cover on base protects the base socket when light is stowed away. Base extends just 3" below deck. 4"-long x 1-5/8"-wide x 1-3/8"-dia. Provides 2-mile 360 degree illumination for boats up to 65.6' (20m). Includes 911339 base and 9-watt wedge base lamp. Three countersunk holes for #10 fasteners.Features:
36"
2-Pin Standard Pole
2-Mile
360 Degree
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Lens Color: White
Visible Range (Miles): 2nm
Housing: White
Voltage - Input Range (Volts): 12v
LED: No
Box Dimensions: 3"H x 5"W x 43"L WT: 1 lbs
UPC: 022697710062
Quick Guide (pdf)
Straight Fuel Vent - Black PolypropyleneA fuel vent, vents air from a fuel tank as it's being filled. This straight fuel vent is patented splash-resistant and corrosion-resistant polypropylene. Meets ABYC ventilation specifications.Features:
Straight Vent
Color: Black
Material: Polypropylene
Specifications:
Hose Size: (inch) 5/8" inner diameter
Maximum Hull Thickness: (inch) 7/8"
Installation Hole Size (inch) 3/4"
*Attwood fuel tank vents meet or exceed U.S. Coast Guard regulations Quick Guide (pdf)
Submersible LED Low-Profile Trailer Light KitIdeal replacement or upgrade for most trailers. Conforms to applicable U.S. FMVSS and Canadian CFMVSS standards.Kit Includes:
Includes (2) multi-functional (stop/tail/turn) submersible low-profile LED trailer lights
License plate bracket
Wiring harness and installation hardware
Specifications:
LED: Yes
Box Dimensions: 4"H x 11"W x 11"L WT: 2.65 lbs
UPC: 022697406477
Quick Guide (pdf)
Submersible LED Trailer Light KitFor use with trailers under 80 inches wide. Conforms to applicable U.S. FMVSS and Canadian CFMVSS standards.Kit Includes:
(2) multi-functional (stop/tail/turn) submersible LED trailer lights
License plate bracket
Wiring harness and installation hardware
Specifications:
LED: Yes
Box Dimensions: 4"H x 11"W x 12"L WT: 2.65 lbs
UPC: 022697140654
Quick Guide (pdf)
Submersible Trailer Light KitApplicable to trailers under 80 inches wide. Ideal for utility, snowmobile, camping, motorcycle, and boat trailers. Design conforms to applicable US FMVSS and Canadian CMVSS safety standards.Complete Kit Includes: A pair of 8-function stop/tail/turn lights, wiring harness, and license plate bracket Specifications:
LED: No
Box Dimensions: 5"H x 9"W x 15"L WT: 2.4 lbs
UPC: 022697140609
Quick Guide (pdf)
Sure-Grip Stainless Steel Rod Holder - 4" & 5-Degree AngleAttwood’s line of Sure-Grip Steel Rod Holders is the perfect complement to Attwood’s molded Pro-Series and Heavy-Duty Adjustable rod holders. They are designed for drift fishing, pan fishing, crappie, and more. The 3/8-inch diameter coated steel rod is tough, strong, and corrosion-resistant. Also, the UV-resistant plastic coating protects the rod butt and handle.Specifications:
Angle: 5-degrees
Stem Length: 4 inches with wing nut
Use for: Horizontal rod position
Includes: 5071 mounting base
Specifications:
Construction: Stainless Steel
Length (Inches): 4"
Box Dimensions: 3"H x 7"W x 10"L WT: 0.7 lbs
UPC: 022697506030
Quick Guide (pdf)
Suzuki 3/8" Barb Female Hose Fitting - Under 75HPQuick-connect female fitting for use on both ends of fuel lines to connect to tank fitting and engine. Fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels. The barb fitting fits a 3/8" I.D. hose. Also, clamps are not included, and use thread sealant on all threads.Features:
Suzuki-brand engines and tanks
Fitted for models under 75HP (Small Bore)
Material Construction: Chrome-plated Brass
*Specifically mates to Attwood part number: 14509-6 Quick Guide (pdf)
SWIVL-EZE 7x7 Zinc Plated Steel 3/4" Pin Base7" x 7" Lock'N-Pin 3/4" Pin Base SP-67739-T is zinc plated steel. It features a threaded bronze bushing for secure fit and durability. Easy to install with six screws or bolts through the deck. Add more seating to your pontoon, fishing or cruising boat with Attwood seating products. Attwood develops high value, engineered marine products to make life on the water easier to enjoy. Made to meet the demands of boat builders and distribution partners, our products are extensively tested on-site in our lab to provide worry-free boating under all conditions.Features:
7" x 7" Lock'N-Pin 3/4" Pin Base is a zinc plated steel top plate.
Works with a threaded pedestal pin and features an acetal bushing for secure fit and durability
Six bolt or screw attachment (hardware not included)
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
SWIVL-EZE LakeSport 2-3/8" Extension Post - 13" HighFixed height lake sport Series pedestal seat extension post 238613L1 is 13 inches high. A great extension post for 238 lake sport seat mounts and socket bases. For use on fishing, pontoon, or cruising boats to provide seat elevation. Attwood develops high-value, engineered marine products to make life on the water easier to enjoy. Made to meet the demands of boat builders and distribution partners, our products are extensively tested on-site in our lab to provide worry-free boating under all conditions.Features:
Hard anodized, corrosion-resistant aluminum seat pedestal
The locking latch has a low-friction ramped bottom for smooth Insertion into the base
The release button operates smoothly requiring less effort to unlock post from 238 series base
SELECT from Lake Sport series posts to get the perfect height for your boating fun
All Springs are stainless steel
Height measured from deck to top of seat mount
SWIVL-EZE LakeSport 2-3/8" Seat Mount with Friction Control - AluminumLakeSport Seat Mount is 2-3/8 inch Locking AO-Aluminum, with Friction Control, 3 Degree Tilt, ABYC Code - AO, Installed Height - 5/8 inch, Bulk Packaging. Hardware is Engineered to Exceed ABYC Standards Type A/Operator Models lead the industry with these features: Ergonomic positive-locking handles with stainless steel components inch-Slot inch locking channels (on adjustable-height models) are the safest manual adjustment available. All Models are reinforced for strength: All LakeSport posts are swaged and welded to the bases Bases have underside ribs for superior strength.
SWIVL-EZE Lock'N-Pin 3/4" Pedestal Kit 13" Post 7" x 7" Stainless Steel Base Plate ThreadedFeatures:
Includes 7" x 7" stainless steel threaded base plate, black E-coated seat mount and 13" high seat post
The 3/4" system gives you outstanding economical performance
Great for adding seating to fishing, pontoon or cruising boats
Lock'N-Pin products meet ABYC Standard
Swivl-Eze Lock'N-Pin 3/4" Pin Seat Mount - Zinc CoatedSpecifications:
Zinc-plated
Tilt: 3 degrees
Pin (inch): 2-3/4" Steel Pin with Spring
ABYC Code: B (not to be used at the helm/driver position)
Installed Height (inch): 2"
#1 supplier of 3/4" pin seating hardware. Here's why:
The 3/4" system gives you outstanding economical performance
The design is proven by decades of experience
The Difference:
The patented Lock'N-Pin system leads the industry in safety
Lock'N-Pin prevents unintentional detachment for seat mounts, posts, and bases
Lock'N-Pin products exceed ABYC Standard H31.6.1
Not recommended to interchange with other manufacturers' products
Quick Guide (pdf)
Swivl-Eze Low Back Padded Flip Seat - CamoThis seat features a high-impact plastic frame and aluminum hinges. It is UV and mildew resistant with easy-to-clean vinyl and a standard seat hole mounting pattern. Specifications:
Dimensions (inch): 15" Wide x 16" depth x 16" height
Color: Camo
ABYC Code: B (not to be used at the helm/driver position)
Quick Guide (pdf)
Swivl-Eze Low Back Padded Flip Seat - GreyThis seat features a high-impact plastic frame and aluminum hinges. It is UV and mildew resistant with easy-to-clean vinyl and a standard seat hole mounting pattern. Specifications:
Dimensions (inch): 15" Wide x 16" depth x 16" height
Color: Grey
ABYC Code: B (not to be used at the helm/driver position)
Quick Guide (pdf)
