Introducing the Marine Clamshell Cable Cover, meticulously crafted from 316 stainless steel. Designed to cover ReefScope camera cables as they enter through the transom, this durable cover provides protection above the waterline, ensuring a sleek and secure installation.
22 Free Swimmer Bite'N' Run 10000 Spinning Reel - FRSW10000A return to the foray of Bite’N’Run reels with Daiwa’s new FREE SWIMMER BR. Bite’N’Run is a key technology for keen live or dead bait anglers allowing fish to take baits under minimal line tension to ensure a solid hookset is achieved. Designed in collaboration between Daiwa USA, Daiwa Australia, Daiwa New Zealand, and alongside Japanese engineers, FREE SWIMMER BR is a product five years in the making and a testament to Daiwa’s commitment to providing the best products to suit local conditions.Anglers will set the Bite’N’Run tension by adjusting the dial on the bottom of the reel, a wide range can be set to suit unweighted baits for finicky feeders such as whiting, up to quite strong settings suitable to live baiting large baits for hard-fighting predators like Kingfish & Mackeral. FREE SWIMMER BR is built off a strong & sturdy carbon composite frame and Air Rotor. The internals has been carefully sealed through careful design and implementation of rubber seals to make FREESWIMMER a true Saltwater Bite’N’Run reel. Careful attention to detail was paid throughout the design and prototype stages to make FREE SWIMMER BR capable of handling even the largest of New Zealand Kingfish & Snapper. FREE SWIMMER BR is equipped with a host of regular Daiwa technologies including Air Rotor, ATD Drag, Tough Digigear & more to round out the best-performing Bite’N’Run reel Daiwa has ever produced.BITE N RUNBite’N’Run is a key technology for keen live or dead bait anglers allowing fish to take baits under minimal line tension to ensure a solid hook set is achieved. The rear drag can be easily adjusted to provide optimum tension for each scenario.AIR ROTORLighter, stronger, and more balanced than any rotor system that’s come before, ‘Air Rotor’ delivers a great leap forward in rotor design and function and delivers the ultimate line roller support. Made from Zaion and featuring a redesigned arch that disperses pressure to the lower section of the rotor to reduce stressing and flexing, the design is further enhanced with a hollowed-out construction reducing weight while increasing reel sensitivity and rotational balance.ATD DRAGDaiwa’s Automatic Tournament Drag uses an improved drag grease that exhibits a low viscosity at rest, yet becomes more viscous immediately after drag starts up. This reduces initial drag start-up inertia and combined with the structural changes of the ATD Drag System results in a smoother drag from the initial hook up.TOUGH DIGIGEARFurther evolution of its predecessor Digigear, Tough Digigear is our brand new digitally designed, machine-cut gearing system that ensures ultimate gear precision, rotational smoothness, and strength. Specifications:
Bearing Count: 4BB+1
Gear Ratio: 4.7
Handle Position: Left/Right
Max Drag: 22 lbs
Retrieve Rate: 39.6"
Series: Free Swimmer
Style: Spinning
Box Dimensions: 5"H x 8"W x 8"L WT: 2.1 lbs
UPC: 043178922453
Coastal SV TW Xtra Hyper Speed Baitcasting Reel - CLSVTW150XH-BA baitcaster designed for light tackle, inshore, and saltwater enthusiasts, the COASTAL SV TW 150. It is ideal for Gulf Coast redfish and speckled trout specialists where small plastics and popping cork set-ups are popular. The reel’s many features will easily crossover into many inshore saltwater applications on any coast. The reel is small, compact, and palm-able. It has a deeper 150 Size Spool in a 100 Size Reel Body.The SV Spool is strong and capable of tolerating the increased pressures of the braided line. The T-Wing System allows the line to pass freely, without friction, through the level wind’s eye, on a long cast. The small reel is substantial and stout built around an Aluminum frame and side plate. The innovative Zaion Star Drag is a “high density” carbon strain material that is 20 percent stronger and 50 percent lighter than traditional nylon and aluminum.A 100mm sweep handle makes hard cranking comfortable and natural. If a light tackle inshore workhorse baitcaster is on your wish list, look no further than Daiwa’s small, compact yet powerful COASTAL SV TW 150, a baitcaster for today’s angler. Features:
100mm Handle
Aluminum Body
MagForce Z - Magnetic Cast Control
SV Spool - Best All-Round Spool
TWS - T-Wing System
Specifications:
Type: Right Hand
Bearings: 4CRBB + 1
Gear Ratio: 8.1:1
Line Per Crank (inches): 33.9"
Mono Capacity: 16/125, 20/100
J-Braid Capacity: 20/200, 30/165
Drag Max: 11
Specifications:
Bearing Count: 4+1
Gear Ratio: 8.1:1
Handle Position: Right
Max Drag: 11 lbs
Retrieve Rate: 33.9"
Series: Coastal
Style: Baitcast Low Profile
Box Dimensions: 3"H x 5"W x 6"L WT: 0.7 lbs
UPC: 043178923818
Coastal TWS 80 Left Hand Baitcast Reel - CLTW80HLDaiwa designed the Coastal TW80 with its advanced Hyper Drive Design. Our HYPER DRIVE DESIGN is comprised of four key technologies- HYPER DRIVE DIGIGEAR, HYPER DOUBLE SUPPORT, HYPER ARMED HOUSING, and HYPER TOUGH CLUTCH.Features:
HYPERDRIVE DIGIGEAR- a brand-new gear design makes the teeth of the gears more efficient at transferring power, therefore making the gear set feel smoother, more powerful, and also reducing gear noise.
HYPER DOUBLE SUPPORT- a two-bearing support system for the reel's pinion gear means no flex and an ultra-smooth retrieve/ gear rotation.
HYPER ARMED HOUSING- the reel features an aluminum frame and side plate for maximum rigidity and precision performance of the internal components.
HYPER TOUGH CLUTCH- a redesigned and reinforced clutch mechanism that increases durability and performance.
Another bonus for the Coastal 80 is its UTD (Ultimate Tournament Drag) system, which includes impregnated drag discs that are about 30 times more durable than typical discs, considerably increasing the effective drag power while also reducing start-up resistance.TWSDaiwa’s revolutionary T-Wing System addresses the issue of traditional line guide/level wind systems constricting line flow by delivering a T-shaped line guide that is larger, wider, and less restrictive. TWS allows lines to exit freely from the spool with minimal line angle and minimal friction, thereby reducing line noise and backlash, and delivering more accurate and longer casts.UTD DragA system that combines ultra smooth low inertia with ultimate fish-stopping power. UTD combines advanced carbon washers, alloy, and stainless steel drag plates with specially designed grease for ultra-smooth performance. Swept HandleDaiwa's exclusive swept handle moves the paddles closer to the rod's centerline. The result is less wobble of the rod and reel in your hand as you crank. That means less wasted energy - a more powerful retrieve. Hyper Drive DesignThe design concepts are the pinnacle of durability and innovation. The Hyper Drive Design consists of four new elements: Hyper Armed Housing, Hyper Drive Digigear, Hyper Double Support, Hyper Tough Clutch.Specifications:
Bearings: 4CRBB+1
Gear Ratio: 7.1
Line Per Crank: 27.9"
Weight: 6.5oz
Mono Capacity: 16/105
J Braid Capacity: 20/160, 30/115
Drag Max: 11
Specifications:
Bearing Count: 4CRBB + 1
Gear Ratio: 7.1
Handle Position: Left
Max Drag: 11 lbs
Retrieve Rate: 27.9"
Series: Coastal
Style: Baitcast Low Profile
Box Dimensions: 3"H x 5"W x 6"L WT: 0.55 lbs
UPC: 043178922668
D-Box Feeder Case - 3600 Medium - DeepDaiwa’s range of tackle trays, D-Box, has been designed and developed to produce a cohesive range of purpose-built storage perfectly suited to the modern angler.Available in a range of sizes and depths, Daiwa’s D-BOX range is made from recycled polypropylene, a low-impact material that delivers no toxic waste, no emissions, no fluorocarbons, and no halogens in its process.All Daiwa D-Box models feature a 4-sided clasp system to ensure secure latching and to fully compress the water-resistant gasket seal, which is installed 360 degrees around the lids of all D-Box models.Each box was carefully designed to maximize storage and versatility, with features like spinner bait storage incorporated into the models.Features:
4 Latches - Securely keeps the lid closed, even when the tackle box is being thrown around in the roughest conditions.
Clear Cover - Allows you to see your gear without opening the lid, making it easy to find what you need.
Customizable - Can be configured to meet your specific needs, such as adding dividers or compartments.
Waterproof Sealing - Prevent water from getting to prized tackle, keeping the gear dry.
Specifications:Size: Medium tackle case with deep depth
D-Box Feeder Case - 3600 ShallowDaiwa’s range of tackle trays, D-Box, has been designed and developed to produce a cohesive range of purpose-built storage perfectly suited to the modern angler.Available in a range of sizes and depths, Daiwa’s D-BOX range is made from recycled polypropylene, a low-impact material that delivers no toxic waste, no emissions, no fluorocarbons, and no halogens in its process.All Daiwa D-Box models feature a 4-sided clasp system to ensure secure latching and to fully compress the water-resistant gasket seal, which is installed 360 degrees around the lids of all D-Box models.Each box was carefully designed to maximize storage and versatility, with features like spinnerbait storage incorporated into the models.Features:
4 Latches - Securely keeps the lid closed, even when the tackle box is being thrown around in the roughest conditions.
Clear Cover - Allows you to see your gear without opening the lid, making it easy to find what you need.
Customizable - Can be configured to meet your specific needs, such as adding dividers or compartments.
Waterproof Sealing - Prevent water from getting to prized tackle, keeping the gear dry.
Specifications:Size: Medium tackle case with shallow depth Specifications:
Tackle Storage: Tackle Box
Box Dimensions: 2"H x 4"W x 9"L WT: 0.5 lbs
UPC: 043178174913
D-Box Feeder Case - 3700 Large - RegularDaiwa’s range of tackle trays, D-Box, has been designed and developed to produce a cohesive range of purpose-built storage perfectly suited to the modern angler.Available in a range of sizes and depths, Daiwa’s D-BOX range is made from recycled polypropylene, a low-impact material that delivers no toxic waste, no emissions, no fluorocarbons, and no halogens in its process.All Daiwa D-Box models feature a 4-sided clasp system to ensure secure latching and to fully compress the water-resistant gasket seal, which is installed 360 degrees around the lids of all D-Box models.Each box was carefully designed to maximize storage and versatility, with features like spinner bait storage incorporated into the models.Features:
4 Latches - Securely keeps the lid closed, even when the tackle box is being thrown around in the roughest conditions.
Clear Cover - Allows you to see your gear without opening the lid, making it easy to find what you need.
Customizable - Can be configured to meet your specific needs, such as adding dividers or compartments.
Waterproof Sealing - Prevent water from getting to prized tackle, keeping the gear dry.
Specifications:Size: Large tackle case with regular depth
Eliminator Spinning Reel - Eliminator3000 The Eliminator Series of Spinning Reels range from a compact 2500 series reel holding a 6-pound test to a beefy 8000 series reel that can pack on the 30-pound test. The reels are also Well Suited For Braided Line Applications. The reel body is constructed utilizing the Hardbodyz Concept. The Aluminum Frame and Sideplate combine to form a strong rigid housing for the state-of-the-art Digigears cut to smooth, precise standards. The attractive yet durable Anodized Finish is scratch and corrosion-resistant.The attractive yet durable Anodized Finish is scratch and corrosion-resistant. The Air Rotor design is 15-percent lighter yet more precisely balanced than competing reels. The stout Aluminum Spool can carry the increased pressures of braided lines and houses buttery smooth, long-lasting Felt Drags. Slide-in handles for easy left or right-hand crank conversion. Suitable for fresh and saltwater applications. If you are looking for a high-quality line of workhorse-like reels at a smart price, then you owe yourself a look at the ELIMINATOR SERIES SPINNING REELS.Specifications:
Bearing: 4BB + 1RB
Gear Ration: 5.6:1
Line Per Crank: 37.4
Weight (oz): 11.3
Mono Capacity: 8/240, 10/200, 12/170
J Braid Capacity: 12/240, 30/190
Drag Max: 15.4
Specifications:
Bearing Count: 4+1
Gear Ratio: 5.6:1
Handle Position: Left/Right
Max Drag: 15.4 lbs
Retrieve Rate: 37.4"
Series: Eliminator
Style: Spinning
Box Dimensions: 4"H x 5"W x 5"L WT: 1 lbs
UPC: 043178922385
Eliminator Spinning Reel - Eliminator4000 The Eliminator Series of Spinning Reels range from a compact 2500 series reel holding a 6-pound test to a beefy 8000 series reel that can pack on the 30-pound test. The reels are also Well Suited For Braided Line Applications. The reel body is constructed utilizing the Hardbodyz Concept. The Aluminum Frame and Sideplate combine to form a strong rigid housing for the state-of-the-art Digigears cut to smooth, precise standards. The attractive yet durable Anodized Finish is scratch and corrosion-resistant.The attractive yet durable Anodized Finish is scratch and corrosion-resistant. The Air Rotor design is 15-percent lighter yet more precisely balanced than competing reels. The stout Aluminum Spool can carry the increased pressures of braided lines and houses buttery smooth, long-lasting Felt Drags. Slide-in handles for easy left or right-hand crank conversion. Suitable for fresh and saltwater applications. If you are looking for a high-quality line of workhorse-like reels at a smart price, then you owe yourself a look at the ELIMINATOR SERIES SPINNING REELS.Specifications:
Bearing: 4BB + 1RB
Gear Ration: 5.7:1
Line Per Crank: 39.9
Weight (oz): 14.5
Mono Capacity: 10/300, 12/260, 14/210
J Braid Capacity: 30/280, 40/200
Drag Max: 17.6
Specifications:
Bearing Count: 4+1
Gear Ratio: 5.7:1
Handle Position: Left/Right
Max Drag: 17.6 lbs
Retrieve Rate: 39.9"
Series: Eliminator
Style: Spinning
Box Dimensions: 4"H x 6"W x 6"L WT: 1.25 lbs
UPC: 043178922392
Eliminator Spinning Reel - Eliminator4500 The Eliminator Series of Spinning Reels range from a compact 2500 series reel holding a 6-pound test to a beefy 8000 series reel that can pack on the 30-pound test. The reels are also Well Suited For Braided Line Applications. The reel body is constructed utilizing the Hardbodyz Concept. The Aluminum Frame and Sideplate combine to form a strong rigid housing for the state-of-the-art Digigears cut to smooth, precise standards. The attractive yet durable Anodized Finish is scratch and corrosion-resistant.The attractive yet durable Anodized Finish is scratch and corrosion-resistant. The Air Rotor design is 15-percent lighter yet more precisely balanced than competing reels. The stout Aluminum Spool can carry the increased pressures of braided lines and houses buttery smooth, long-lasting Felt Drags. Slide-in handles for easy left or right-hand crank conversion. Suitable for fresh and saltwater applications. If you are looking for a high-quality line of workhorse-like reels at a smart price, then you owe yourself a look at the ELIMINATOR SERIES SPINNING REELS.Specifications:
Bearing: 4BB + 1RB
Gear Ration: 5.7:1
Line Per Crank: 43.1
Weight (oz): 21.7
Mono Capacity: 14/350, 17/280, 20/210
J Braid Capacity: 40/340, 50/270
Drag Max: 17.6
Specifications:
Bearing Count: 4+1
Gear Ratio: 5.7:1
Handle Position: Left/Right
Max Drag: 17.6 lbs
Retrieve Rate: 43.1"
Series: Eliminator
Style: Spinning
Box Dimensions: 5"H x 7"W x 7"L WT: 1.9 lbs
UPC: 043178922408
Eliminator Spinning Reel - Eliminator5000 The Eliminator Series of Spinning Reels range from a compact 2500 series reel holding a 6-pound test to a beefy 8000 series reel that can pack on the 30-pound test. The reels are also Well Suited For Braided Line Applications. The reel body is constructed utilizing the Hardbodyz Concept. The Aluminum Frame and Sideplate combine to form a strong rigid housing for the state-of-the-art Digigears cut to smooth, precise standards. The attractive yet durable Anodized Finish is scratch and corrosion-resistant.The attractive yet durable Anodized Finish is scratch and corrosion-resistant. The Air Rotor design is 15-percent lighter yet more precisely balanced than competing reels. The stout Aluminum Spool can carry the increased pressures of braided lines and houses buttery smooth, long-lasting Felt Drags. Slide-in handles for easy left or right-hand crank conversion. Suitable for fresh and saltwater applications. If you are looking for a high-quality line of workhorse-like reels at a smart price, then you owe yourself a look at the ELIMINATOR SERIES SPINNING REELS.Specifications:
Bearing: 4BB + 1RB
Gear Ration: 5.7:1
Line Per Crank: 47.4
Weight (oz): 22.5
Mono Capacity: 14/470, 17/380, 20/280
J Braid Capacity: 50/360, 65/310
Drag Max: 17.6
Specifications:
Bearing Count: 4+1
Gear Ratio: 5.7:1
Handle Position: Left/Right
Max Drag: 17.6 lbs
Retrieve Rate: 47.4"
Series: Eliminator
Style: Spinning
Box Dimensions: 5"H x 7"W x 7"L WT: 1.8 lbs
UPC: 043178922415
Free Swimmer EX 10000 Bite & Run Spinning ReelFree Swimmer EX features an automatic Bite N’ Run clutch at the base of the body, allowing anglers to instantly disengage the spool so the line can peel off with little or no resistance while the bail is closed. Simply pull down on the lever to place the reel in free-spool mode and flip it back instantly to reengage when a fish grabs your bait. A small tension control knob at the back of the reel makes it easy to adjust spool tension to control the speed at which line plays out.With the Free Swimmer EX, though, it’s easy to cast energetic live bait away from the vessel, so it can swim freely where you’re most likely to draw a strike. Fishing live-lining Gulf Coast hardtails or sardines, feeding big baits to tarpon in the Florida Keys, targeting huge cobia in the mid-Atlantic region, or swimming big bunkers in Northeast waters for cow stripers, Daiwa’s Free Swimmer EX provides that extra edge.Using the tension control, anglers can moderate the speed at which the offerings swim, slowing overly active live bait to keep them centered in the strike zone. The ability to free-line with a closed bail also adds an extra degree of safety since anglers never have to keep a finger on a braided line to hold the bait in the perfect position.Features:
ATD Drag - Daiwa’s Automatic Tournament Drag uses an improved drag grease that exhibits a low viscosity at rest yet becomes more viscous immediately after drag start-up. This reduces initial drag start-up inertia and, combined with the structural changes of the ATD Drag System, results in a smoother drag from the initial hook-up.
Digigear - Daiwa’s first generation of digitally engineered gear design ensures a perfect mesh between ultra-tough drive gears and pinion gears for optimized speed, power, durability, and smoothness.
Machined Aluminum Handle - Ergonomically correct and screws easily into the body.
Metal Ball Knob - Providing maximum contact between handle knob and hand, ball knobs are designed for optimal balance, rotation, and functionality.
Specifications:
Bearings: 5 (4CRBB+1BB) + 1
Gear Ratio: 4.7: 1
Line Per Crank (inch): 39.3"
Weight (oz): 23.3
Mono Capacity: 20/330, 25/280
J Braid Capacity: 50/330, 65/280
Drag Max: 22
Handle Position: Left/right
Specifications:
Bearing Count: 5+1
Gear Ratio: 4.7:1
Handle Position: Left/Right
Max Drag: 22 lbs
Retrieve Rate: 39.3"
Series: Free Swimmer
Style: Spinning
Box Dimensions: 5"H x 8"W x 8"L WT: 2.1 lbs
UPC: 043178174630
Fuego CT Baitcasting Reel - FGCT100H Fuego CT line of baitcasters features a lower profile design that is as good-looking as it is comfortable to fish. What makes this reel special is the aluminum CT frame that delivers durability and performance, the air rotation which gives it a silky-smooth effortless retrieve. The Magforce braking system delivers an incredible free-spool with an extremely long and manageable cast.Specifications:
Bearing: 5BB + 1
Gear Ration: 6.3:1
Line Per Crank: 26.3
Weight (oz): 7.6
Mono Capacity: 14/120, 16/100
J Braid Capacity: 30/140, 40/105
Drag Max: 13.2
Handle: Right
Specifications:
Bearing Count: 5+1
Gear Ratio: 6.3:1
Handle Position: Right
Max Drag: 13.2 lbs
Retrieve Rate: 26.3"
Series: Fuego
Style: Baitcast Low Profile
Box Dimensions: 3"H x 4"W x 6"L WT: 0.55 lbs
UPC: 043178928103
Fuego LT 4000 Spinning ReelFuego LT has a ZAION V carbon-fiber body, not the nylon-based plastic in other manufacturers’ reels at this price point. The new Fuego stands alone in the marketplace at this price. You also get some weight reduction (3%–5%) as a result of this material design change.Fuego also uses an Airdrive rotor, which reduces quite a bit of weight. Daiwa also incorporated a solid Airdrive bail versus a tubular design. The reason for that is that the metal Daiwa uses is very strong, rigid, and doesn’t bend—yet it’s thinner and lighter. The goal was to reduce the weight of the rotation, which reduces the weight of the reel as well. It also makes it easier to turn the handle.FeaturesAir BailDaiwa’s innovative bail design features a hollow tubular stainless steel bail that delivers maximum rigidity and strength with minimum weight. Featuring a smooth, protrusion-free design and construction, the line easily slides unencumbered along the Air Bail towards the line roller for trouble-free line control.Air RotorLighter, stronger, and more balanced than any rotor system that’s come before, ‘Air Rotor’ delivers a great leap forward in rotor design and function and delivers the ultimate reel sensitivity and rotational balance.Tough DigigearA further evolution of its predecessor, Digigear, Tough Digigear is our brand new digitally designed, machine-cut gearing system that ensures ultimate gear precision, rotational smoothness, and strength.Zaion V BodyA new generation of lightweight Daiwa’s resin and carbon material. The Zaion V material is both strong and incredibly lightweight.Specifications:
Bearings: 6BB + 1
Gear Ratio: 5.2 : 1
Line Per Crank (inch): 32.5"
Weight (oz): 8.1
Mono Capacity: 10/360, 14/250
J Braid Capacity: 20/280, 30/200
Drag Max: 26.4
Handle Position: Left/right
Specifications:
Bearing Count: 6+1
Gear Ratio: 5.2:1
Handle Position: Left/Right
Max Drag: 26.4 lbs
Retrieve Rate: 32.5"
Series: Fuego
Style: Spinning
Box Dimensions: 4"H x 5"W x 6"L WT: 0.8 lbs
UPC: 043178169513
Fuego LT 6000 Spinning ReelFuego LT has a ZAION V carbon-fiber body, not the nylon-based plastic in other manufacturers’ reels at this price point. The Fuego stands alone in the marketplace at this price. You also get some weight reduction (3%–5%) as a result of this material design change.Fuego also uses an Airdrive rotor, which reduces quite a bit of weight. Daiwa also incorporated a solid Airdrive bail versus a tubular design. The reason for that is that the metal Daiwa uses is very strong, rigid, and doesn’t bend—yet it’s thinner and lighter. The goal was to reduce the weight of the rotation, which reduces the weight of the reel as well. It also makes it easier to turn the handle.FeaturesAir BailDaiwa’s innovative bail design features a hollow tubular stainless steel bail that delivers maximum rigidity and strength with minimum weight. Featuring a smooth, protrusion-free design and construction, the line easily slides unencumbered along the Air Bail towards the line roller for trouble-free line control.Air RotorLighter, stronger, and more balanced than any rotor system that’s come before, ‘Air Rotor’ delivers a great leap forward in rotor design and function and delivers the ultimate reel sensitivity and rotational balance.Tough DigigearA further evolution of its predecessor, Digigear, Tough Digigear is our brand new digitally designed, machine-cut gearing system that ensures ultimate gear precision, rotational smoothness, and strength.Zaion V BodyA new generation of lightweight Daiwa’s resin and carbon material. The Zaion V material is both strong and incredibly lightweight.Specifications:
Bearings: 6BB + 1
Gear Ratio: 5.1 : 1
Line Per Crank (inch): 36.2"
Weight (oz): 11.1
Mono Capacity: 20/270, 30/160
J Braid Capacity: 30/320, 40/240
Drag Max: 26.4
Handle Position: Left/right
Specifications:
Bearing Count: 6+1
Gear Ratio: 5.1:1
Handle Position: Left/Right
Max Drag: 26.4 lbs
Retrieve Rate: 36.2"
Series: Fuego
Style: Spinning
Box Dimensions: 4"H x 6"W x 6"L WT: 1 lbs
UPC: 043178169575
J-BRAID x4 Braided Line - 10 lbs - 300 yds - Dark GreenJ-BRAID x4 is perfect for abrasion resistance and ease of use for knot tying and line management. The 4-carrier lends itself to being a bit thinner in diameter, making it great for adding additional lines to the reel when necessary. x4 is made with the highest-quality Dyneema material from Japan. Daiwa's proven high standard of manufacturing makes J-BRAID one of the best on the market today. J-BRAID™ Dark GreenDark green is more natural in situations where you may want to tie your hook or lure directly onto the line without a leader.Specifications:
Length: 300 yds
Lb. Test: 10 lbs
Kg Test: 4.8 kg
Diameter: 0.007 in.
Diameter: 0.17 mm
Mono Diameter: 2.5 lbs
Spool: Filler spool
Color: Dark Green
Description: 4 strand weave
Specifications:
Break Strength: 10 lb.
Color: Green
Length: 300 yds
Series: J-Braid
Box Dimensions: 1"H x 5"W x 6"L WT: 0.5 lbs
UPC: 043178146835
J-BRAID x4 Braided Line - 10 lbs - 300 yds - Island BlueJ-BRAID x4 is perfect for abrasion resistance and ease of use for knot tying and line management. The 4-carrier lends itself to being a bit thinner in diameter, making it great for adding additional lines to the reel when necessary. x4 is made with the highest-quality Dyneema material from Japan. Daiwa's proven high standard of manufacturing makes J-BRAID one of the best on the market today. Specifications:
Length: 300 yds
Lb. Test: 10 lbs
Kg Test: 4.8 kg
Diameter: 0.007 in.
Diameter: 0.17 mm
Mono Diameter: 2.5 lbs
Spool: Filler spool
Color: Island Blue
Description: 4 strand weave
Specifications:
Break Strength: 10 lb.
Color: Blue
Length: 300 yds
Series: J-Braid
Box Dimensions: 1"H x 5"W x 6"L WT: 0.5 lbs
UPC: 043178149973
J-BRAID x4 Braided Line - 15lb - 300 yds - Dark GreenJ-BRAID x4 is perfect for abrasion resistance and ease of use for knot tying and line management. The 4-carrier lends itself to being a bit thinner in diameter, making it great for adding additional lines to the reel when necessary. x4 is made with the highest-quality Dyneema material from Japan. Daiwa's proven high standard of manufacturing makes J-Braid one of the best on the market today. J-BRAID™ Dark GreenDark green is more natural in situations where you may want to tie your hook or lure directly onto the line without a leader.Specifications:
Length: 300 yds
Lb. Test: 15 lb.
Kg Test: 7 kg
Diameter: 0.008 in.
Diameter: 0.19 mm
Mono Diameter: 4 lb.
Spool: Filler spool
Color: Dark green
Description: 4 strand weave
Specifications:
Break Strength: 15 lb.
Color: Green
Length: 300 yds
Series: J-Braid
Box Dimensions: 1"H x 5"W x 6"L WT: 0.5 lbs
UPC: 043178146842
