3-Way Auto/Off/Manual Bilge Pump SwitchPart #: 7615A3Panel-mounted rocker switches for use with pump that draws 10 amps or less.Features:
1/4" spade terminals
6-volt through 32-volt D.C. only
10 amps maximum
Plate is 2-13/16" x 1-7/8"
Hole size is 1-1/2" x 7/8"
Caution: Bilge pump switches are not external ignition protected.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Volts: 12/24v
Type: Switches
Box Dimensions: 1"H x 3"W x 5"L WT: 0.1 lbs
UPC: 022697761590
Quick Guide (pdf)
3.5lb Grapnel Anchor SystemThis 3.5lb anchor will hold your PWC, canoe, dinghy, kayak, or float tube in sand, mud, gravel, and rock. Includes 25' of rope, marker buoy, giant snap hook, anchor and a durable nylon storage case that protects your boat from scratches.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
3/8" Hose Mender In-Line Fuel Splice Kit with Stainless Steel ClampsWhether it’s an emergency situation on the water or routine maintenance at the dock, this in-line fuel splice kit provides everything you need to repair 3/8-inch lines. Machined brass fitting paired with 2 stainless steel hose clamps. Features:
Everything you need to mend a 3/8-inch fuel line including 2 stainless steel hose clamps
Solid machined brass with barbed ends
A centered divider ensures you get the mender evenly and securely placed between both ends of the hose
Very Versatile: Use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels
Quick Guide (pdf)
316 Stainless Steel Alloy Flush Mount Fuel Vent - 90° VentOn the exterior, they have a smooth edge over the competition. Unlike some others, there is no protruding cap to cause damage or be damaged by hull bumps and scrapes. Cap unscrews with a hex head wrench for easy cleaning of the filter and pressure testing of the entire fuel system. These vents now include two silicone gaskets.Features:90-degree ventSpecifications:
Hose Size (inch): 5/8" inner diameter
Maximum Hull Thickness (inch): 7/8"
Installation Hole Size (inch): 1-3/8"
*Includes two silicone gaskets Quick Guide (pdf)
316 Stainless Steel Alloy Flush Mount Fuel Vent - Straight Vent On the exterior, they have a smooth edge over the competition. Unlike some others, there is no protruding cap to cause damage or be damaged by hull bumps and scrapes. Cap unscrews with a hex head wrench for easy cleaning of the filter and pressure testing of the entire fuel system. These vents now include two silicone gaskets.Features:Straight VentSpecifications:
Hose Size (inch): 5/8" inner diameter
Maximum Hull Thickness (inch): 7/8"
Installation Hole Size (inch): 1-3/8"
*Includes two silicone gaskets Quick Guide (pdf)
LED Utility Courtesy Strip LightAttwood's 4" LED Utility Courtesy Light is perfect for interior applications. Surface mount is designed to be installed above the water line. Six bright white LED's. Low amp draw, 12 VDC. Water resistant design. Uses a pigtail wire connector. Mounting hardware included.
White LED
Waterproof
Surface mount
Pigtail wire connector
Specifications:
Bulb Type: LED
Voltage - Input Range (Volts): 12v
Housing: Black
LED Color: White
Dimming: No
Box Dimensions: 1"H x 5"W x 8"L WT: 0.15 lbs
UPC: 022697635570
500 GPH Shower Sump MK2 System - 12VAttwood’s shower sump systems deliver the performance you’ve been asking for. Choose from standard or large box sizes. They offer fast water flow into and out of the sump. The lid snaps into place to allow quick installation (and removal for cleaning) and includes a gasket to seal the sump box against overflow. The sump box even includes an air vent to prevent airlocks. It meets or exceeds all applicable standards of the ABYC and USCG.Specifications:
Amp Draw: 1.4
500 GPH
Rated Voltage: 12V
Fuse Size: 3A
Outlet Hose Size: 3/4" I.D.
Wire/Connector: 22" wire
6" Fold-Down Dock CleatLow-profile cleats simply fold-down when not in use and flip back up when it comes time to tie off.Features:
Ideal for small boats and watercraft
Low-profile, fold-down design keeps cleat clear of dock traffic
Marine-grade aluminum protected with corrosion resistant finish
Easy to install on all dock types
Requires two standard 3/8" carriage bolts (not included)
Specifications:
Finish: White
Size: 6"
Construction: Aluminum
Box Dimensions: 1"H x 5"W x 6"L WT: 0.75 lbs
UPC: 022697120489
6" LED Utility Courtesy Light - 12V
Water Resistant
Surface mount design
12 VDC
Less than 1 Amp draw (35mA)
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Bulb Type: LED
Voltage - Input Range (Volts): 12v
Housing: Black
LED Color: White
Dimming: No
Box Dimensions: 2"H x 4"W x 10"L WT: 0.1 lbs
UPC: 022697635471
8" Fold-Down Dock CleatLow-profile cleats simply fold-down when not in use and flip back up when it comes time to tie off.Features:
Ideal for small boats and watercraft
Low-profile, fold-down design keeps cleat clear of dock traffic
Marine-grade aluminum protected with corrosion resistant finish
Easy to install on all dock types
Requires two standard 3/8" carriage bolts (not included)
Specifications:
Finish: White
Size: 8"
Construction: Aluminum
Box Dimensions: 1"H x 7"W x 8"L WT: 1.25 lbs
UPC: 022697120496
800 GPH Shower Sump MK2 System - 12VAttwood’s shower sump systems deliver the performance you’ve been asking for. Choose from standard or large box sizes. They offer fast water flow into and out of the sump. The lid snaps into place to allow quick installation (and removal for cleaning) and includes a gasket to seal the sump box against overflow. The sump box even includes an air vent to prevent airlocks. It meets or exceeds all applicable standards of the ABYC and USCG.Specifications:
800 GPH
Amp Draw: 2.5
Rated Voltage: 12V
Fuse Size: 5A
Outlet Hose Size: 3/4" I.D.
Wire/Connector: 22" wire
Anchor BuoyAttwood's Anchor Buoy is constructed using premium marine grade vinyl construction for superior durability. The buoys are soft and pliable to prevent scratching and have built in UV inhibitors to guard against discoloration of the high visibility fluorescent orange. These buoys use "MicroGuard" technology to protect from rotting, mold and mildew.
Premium marine grade vinyl
UV protection
9" diameter
Fluorescent orange color
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Color: Orange
Diameter (Inches): 9"
Box Dimensions: 9"H x 10"W x 13"L WT: 2.25 lbs
UPC: 022697093509
90° P-Trap Fuel Tank Vent - Black with Black Vent HeadThis Attwood 90-Degree P-Trap Fuel Tank Vent reliably helps prevent water from entering the fuel tank while still allowing air to vent freely during normal sea conditions and washdowns. This vent’s effectiveness eliminates the need for an anti-siphon loop in the vent hose. It requires a ¾-inch installation hole and can be used with a maximum hull thickness of 9/16 inches. Features:
Standard Mount - (inch) 5/8" I.D Hose
Reliably helps prevent water from entering the fuel tank
Still allows air to vent freely during normal sea conditions and washdowns
This black vent with a black vent head meets ABYC standards
*Compatible with Ethanol blended fuels. Quick Guide (pdf)
90° P-Trap Fuel Tank Vent - Black with Stainless Steel Trim CoverComposite 90-degree P-trap fuel tank vent 66419-3. These vents help prevent water from entering the fuel tank, yet allow air to vent freely, during normal sea conditions and washdowns. This eliminates the need for an anti-siphon loop in the vent hose. Features:
For 5/8" I.D. hose
(inch) 3/4" install. hole size
(inch) 9/16" max. hull thickness
Vents air from your boat's fuel tank as you fill the fuel tank
Splash-resistant, corrosion resistant
Meets ABYC standard
*Compatible with Ethanol blended fuels Quick Guide (pdf)
90° P-Trap Fuel Tank Vent - Flush Mount - Black with Stainless Steel Vent HeadThis Attwood 90-Degree P-Trap Fuel Tank Vent reliably helps prevent water from entering the fuel tank while still allowing air to vent freely during normal sea conditions and washdowns. This vent’s effectiveness. eliminates the need for an anti-siphon loop in the vent hose. This is a flush mount vent for use with a 5/8-inch interior diameter hose. It requires a 1-3/8-inch installation hole and can be used with a maximum hull thickness of 1 inch.Features:
This black vent with a stainless steel vent head meets ABYC standards
Flush Mount - 5/8" I.D. hose
(inch) 1-3/8" install. hole size
(inch) 1" Max. hull thickness
*Compatible with Ethanol blended fuels Quick Guide (pdf)
Adjustable Heavy-Duty Transom Saver - 24"-36"Protect your investment with Attwood Transom Savers. A lifted outboard puts hundreds of foot-pounds of pressure on the transom - especially during trailering.Features:
Support the cantilevered weight of the motor
Stabilize engine and steering mechanism when trailering
The Attwood Difference:Tough components - You'll get long life from our adjustable toggles with replaceable rubber pads
Adjustable Transom Saver - Composite - Roller/BoltProtect your investment with Attwood Transom Savers. A lifted outboard puts hundreds of foot-pounds of pressure on the transom - especially during traileringProtect your boat and engine with Attwood Transom Savers:
Support the cantilevered weight of the motor
Stabilize engine and steering mechanism when trailering
The Attwood Difference: Tough components - You'll get long life from our adjustable toggles with replaceable rubber padsWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Aft-Deck ShowerInstall flush in the transom or under the gunwale. Includes hinged cover and replaceable sprayer head. Fixtures are corrosion-resistant. Housing and cover are made of high-impact, UV resistant, engineering-grade plastic and are pre-drilled for six #8 fasteners. Comes with 6' hose, shut-off and hot/cold mixing controls. Connects to freshwater system for showeringWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Type: Misc
Box Dimensions: 5"H x 5"W x 11"L WT: 1.91 lbs
UPC: 022697413147
Quick Guide (pdf)
All-Around Fold-Down Incandescent Anti-Glare Lens Light - 20" Aluminum Pole - 12V - Horizontal Composite BaseIncandescent Fold-Down Navigation LightsAll Attwood All-Round Fold-Down Navigation Lights include a new durable, easy-to-use, easy-to-install, LightArmor Fold-Down Base.
Robust design provides easy, single-handed cam-lock operation
Built to last in harsh marine environments
Provides 2-mile, 360°, illumination for boats up to 39.4' (12M)
Incandescent All-Round navigation light engine
Shock, corrosion-and water-proof electronics
Durable, anodized aluminum pole
Anti-glare lens preserves night vision
USCG certified
Assembled with Attwood's LightArmor bases
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Lens Color: White
Visible Range (Miles): 2nm
Housing: Black
Voltage - Input Range (Volts): 12v
LED: No
Box Dimensions: 1"H x 5"W x 26"L WT: 0.5 lbs
UPC: 022697535276
All-Round Deck Mount LightThe Deck Mount Light has 7-inch leads for connection to a 12V DC power supply. Also, the bayonet lock secures the lens and cover to the base, providing easy lamp replacement. Light mounts flush, making it ideal for installation atop the tow piece on ski or wakeboard boat towers.Features:
Includes a 9W wedge base lamp
Installs directly to deck with two required #10 fasteners
Deck mount
Black
*Does not have a raised base Specifications:
Housing: Black
Lens Color: Clear
Voltage - Input Range (Volts): 12
Box Dimensions: 5"H x 5"W x 5"L WT: 0.55 lbs
UPC: 022697594075
Quick Guide (pdf)
Anchor Lift SystemThis convenient system drops the anchor at the turn of a button and stores it in the anchor mount housing when not in use. Constructed of heavy gauge steel with durable powder coated finish and mounts on the bow or stern corners of most boats.
Anchor secures within anchor mount housing. Mounts easily to bow or stern. Deploy anchor with the simple twist of a knob. Includes:
Anchor Mount/Rope Guide Assembly
Anchor Rope Reel Assembly
Rear Pulley, Rear Pulley Axel
Other Features:
Anchor deploys and lifts smoothly and securely.
Easy installation with detailed instructions.
Multiple mounting solutions
Anchor stows conveniently in anchor mount housing
*Anchor, rope, and mounting hardware not included.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Anchor Ring & RopeAssists in anchor retrieval. Designed to lift anchor systems up to 80lbs where 10' or more of anchor chain is used. Lifting capacity based on anchor buoy size. *Buoy sold separately.
ATO/ATC Fuse HolderWatertight, extra heavy duty and weatherproof. For use with fuses up to 30 Amps. 12 gauge wire leads for easy hook-ups. Fuse not included.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Fuse Type: ATO/ATC
Type: Fuse Holders
Box Dimensions: 2"H x 3"W x 7"L WT: 0.1 lbs
UPC: 022697143488
Float SwitchPart #: 4202-7Converts bilge pumps to fully automatic operation. Maximum amp draw is 12 amps (at 12-volt D.C.) or 6-amps (at 24-Volts D.C.). Features a compact, low profile design that mounts on any surface from a horizontal up to a 24x angle. Incorporates a reliable and affordable mechanical switch that actuates pump motor at 2" water level. Wire leads do not flex or hinge with the float as on some competitive models. Integral cover dampens bilge sloshing to reduce pump cycling, and prevents debris interference. Sealed switch mechanism resists moisture, fume-ignition, and electrical shock. Contains no mercury, which is listed as a health hazard and "Persistent Toxic Substance" in over 26 states.Float switch installs directly onto the rear slots of the V-Series pump bracket. Features a convenient test knob to test pump operation.Features:
36" Wire
12V & 24V
CE Rated
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Volts: 12/24v
Type: Switches
Box Dimensions: 3"H x 6"W x 9"L WT: 0.4 lbs
UPC: 022697420275
Quick Guide (pdf)
