ATLAS™ 4" Set Back Hydraulic Jack Plate - Heavy DutyT-H Marine’s ATLAS™ Hydraulic Jack Plate is now available in a “HEAVY DUTY” upgrade.T-H Marine’s ATLAS™ Hydraulic Jack Plate is the #1 selling jack plate in the world and the #1 Choice by fishing professionals and boat manufacturers. With the new ATLAS™ HEAVY DUTY, the product is available for applications on even larger outboards, rated for engines up to 400 hp. 5 REASONS YOU SHOULD CHOOSE THE ATLAS™ HYDRAULIC JACK PLATE
ATLAS™ is truly the best hydraulic jack plate in the world
ATLAS™ is factory installed by more boat manufacturers than any other plate
ATLAS™ is used by more professional fisherman than any other hydraulic jack plate
ATLAS™ is the #1 selling hydraulic plate in the world – sold & serviced by more outlets
ATLAS™ hydraulic actuator is made in the U.S.A. vs. our competitors being from China
6 WAYS THE ATLAS™ CHANGED HYDRAULIC JACK PLATES FOREVER
ATLAS™ is made by T-H Marine/CMC, who were the FIRST to offer an actuator inside the jack plate – the competition copied
ATLAS™ was the first plate to offer predrilling for shallow water anchors – the competition copied
ATLAS™ was the first and only plate that did not require regular grease lubrication – the competition design cannot do that
ATLAS™ was the first plate to include a heavy duty safety cable to protect boaters from engine entering cockpit upon failure
ATLAS™ was the first plate to offer a very simple actuator replacement in the field
ATLAS™ was the first major development in hydraulic jack plates in over a decade – spurring hydraulic jack plate improvement
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
ATLAS™ 6" Set Back Hydraulic Jack Plate - Gloss Black AnodizedThe Atlas revolutionary design meets the demands of today's high performance outboards. The one piece design, featuring the innovative Rod and Slot lifting system, will handle the stresses from the heaviest and most powerful outboards, up to 300 HP or 625 pounds, on the market today. All of the hydraulics are built into the jack eliminating the necessity of installing pumps and reservoirs inside the transom. The all new hydraulic unit is fast too..lifting from bottom to top in 8 seconds!Comes with relay harness and rocker switch WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
ATLAS™ 6" Set Back Hydraulic Jack Plate - Heavy DutyT-H Marine’s ATLAS™ Hydraulic Jack Plate is now available in a “HEAVY DUTY” upgrade.T-H Marine’s ATLAS™ Hydraulic Jack Plate is the #1 selling jack plate in the world and the #1 Choice by fishing professionals and boat manufacturers. With the new ATLAS™ HEAVY DUTY, the product is available for applications on even larger outboards, rated for engines up to 400 hp. 5 REASONS YOU SHOULD CHOOSE THE ATLAS™ HYDRAULIC JACK PLATE
ATLAS™ is truly the best hydraulic jack plate in the world
ATLAS™ is factory installed by more boat manufacturers than any other plate
ATLAS™ is used by more professional fisherman than any other hydraulic jack plate
ATLAS™ is the #1 selling hydraulic plate in the world – sold & serviced by more outlets
ATLAS™ hydraulic actuator is made in the U.S.A. vs. our competitors being from China
6 WAYS THE ATLAS™ CHANGED HYDRAULIC JACK PLATES FOREVER
ATLAS™ is made by T-H Marine/CMC, who were the FIRST to offer an actuator inside the jack plate – the competition copied
ATLAS™ was the first plate to offer predrilling for shallow water anchors – the competition copied
ATLAS™ was the first and only plate that did not require regular grease lubrication – the competition design cannot do that
ATLAS™ was the first plate to include a heavy duty safety cable to protect boaters from engine entering cockpit upon failure
ATLAS™ was the first plate to offer a very simple actuator replacement in the field
ATLAS™ was the first major development in hydraulic jack plates in over a decade – spurring hydraulic jack plate improvement
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
ATLAS™ 8" Set Back Hydraulic Jack Plate - Glossy Black AnodizedThe Atlas revolutionary design meets the demands of today's high performance outboards. The one piece design, featuring the innovative Rod and Slot lifting system, will handle the stresses from the heaviest and most powerful outboards, up to 300 HP or 625 pounds, on the market today. All of the hydraulics are built into the jack eliminating the necessity of installing pumps and reservoirs inside the transom. The all new hydraulic unit is fast too..lifting from bottom to top in 8 seconds!WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
ATLAS™ 8" Set Back Hydraulic Jack Plate - Heavy Duty BlackT-H Marine’s ATLAS™ Hydraulic Jack Plate is now available in a “HEAVY DUTY” upgrade.T-H Marine’s ATLAS™ Hydraulic Jack Plate is the #1 selling jack plate in the world and the #1 Choice by fishing professionals and boat manufacturers. With the new ATLAS™ HEAVY DUTY, the product is available for applications on even larger outboards, rated for engines up to 400 hp. 5 REASONS YOU SHOULD CHOOSE THE ATLAS™ HYDRAULIC JACK PLATE
ATLAS™ is truly the best hydraulic jack plate in the world
ATLAS™ is factory installed by more boat manufacturers than any other plate
ATLAS™ is used by more professional fisherman than any other hydraulic jack plate
ATLAS™ is the #1 selling hydraulic plate in the world – sold & serviced by more outlets
ATLAS™ hydraulic actuator is made in the U.S.A. vs. our competitors being from China
6 WAYS THE ATLAS™ CHANGED HYDRAULIC JACK PLATES FOREVER
ATLAS™ is made by T-H Marine/CMC, who were the FIRST to offer an actuator inside the jack plate – the competition copied
ATLAS™ was the first plate to offer predrilling for shallow water anchors – the competition copied
ATLAS™ was the first and only plate that did not require regular grease lubrication – the competition design cannot do that
ATLAS™ was the first plate to include a heavy duty safety cable to protect boaters from engine entering cockpit upon failure
ATLAS™ was the first plate to offer a very simple actuator replacement in the field
ATLAS™ was the first major development in hydraulic jack plates in over a decade – spurring hydraulic jack plate improvement
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
ATLAS™ 8" Set Back Hydraulic Jack Plate - Heavy DutyT-H Marine’s ATLAS™ Hydraulic Jack Plate is now available in a “HEAVY DUTY” upgrade.T-H Marine’s ATLAS™ Hydraulic Jack Plate is the #1 selling jack plate in the world and the #1 Choice by fishing professionals and boat manufacturers. With the new ATLAS™ HEAVY DUTY, the product is available for applications on even larger outboards, rated for engines up to 400 hp. 5 REASONS YOU SHOULD CHOOSE THE ATLAS™ HYDRAULIC JACK PLATE
ATLAS™ is truly the best hydraulic jack plate in the world
ATLAS™ is factory installed by more boat manufacturers than any other plate
ATLAS™ is used by more professional fisherman than any other hydraulic jack plate
ATLAS™ is the #1 selling hydraulic plate in the world – sold & serviced by more outlets
ATLAS™ hydraulic actuator is made in the U.S.A. vs. our competitors being from China
6 WAYS THE ATLAS™ CHANGED HYDRAULIC JACK PLATES FOREVER
ATLAS™ is made by T-H Marine/CMC, who were the FIRST to offer an actuator inside the jack plate – the competition copied
ATLAS™ was the first plate to offer predrilling for shallow water anchors – the competition copied
ATLAS™ was the first and only plate that did not require regular grease lubrication – the competition design cannot do that
ATLAS™ was the first plate to include a heavy duty safety cable to protect boaters from engine entering cockpit upon failure
ATLAS™ was the first plate to offer a very simple actuator replacement in the field
ATLAS™ was the first major development in hydraulic jack plates in over a decade – spurring hydraulic jack plate improvement
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
ATLAS™ 8" Set Back Hydraulic Jack Plate PolishedRated for engines up to 300hp or up to 625 pounds dry weight.5 REASONS YOU SHOULD CHOOSE THE ATLAS™ HYDRAULIC JACK PLATE
ATLAS™ is truly the best hydraulic jack plate in the world
ATLAS™ is factory installed by more boat manufacturers than any other plate
ATLAS™ is used by more professional fisherman than any other hydraulic jack plate
ATLAS™ is the #1 selling hydraulic plate in the world – sold & serviced by more outlets
ATLAS™ hydraulic actuator is made in the U.S.A. vs. our competitors being from China
6 WAYS THE ATLAS™ CHANGED HYDRAULIC JACK PLATES FOREVER
ATLAS™ is made by T-H Marine/CMC, who were the FIRST to offer an actuator inside the jack plate – the competition copied
ATLAS™ was the first plate to offer predrilling for shallow water anchors – the competition copied
ATLAS™ was the first and only plate that did not require regular grease lubrication – the competition design cannot do that
ATLAS™ was the first plate to include a heavy duty safety cable to protect boaters from engine entering cockpit upon failure
ATLAS™ was the first plate to offer a very simple actuator replacement in the field
ATLAS™ was the first major development in hydraulic jack plates in over a decade – spurring hydraulic jack plate improvement
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
ATLAS FingerFlex Blinker Trim Control for Hydraulic Helms - Dual Control SwitchUPDATED DESIGN: FingerFlex "Blinker Style" Steering Wheel Trim SwitchT-H Marine offers the answer to convenient trim control for hydraulic helms - FingerFlex. Simple and easy to install, this unit can be added to any boat with only a moderate amount of difficulty.FingerFlex incorporates "Positive Clicking" technology that provides a positive touch and feel so, unlike similar systems, you know when your trim is operating and that's important when you really need it!FingerFlex can be installed on the right or left side of the bezel or both for dual controls. It can also be used to control hydraulic jack plates in addition to tilt and trim systems. Versions are also available to fit most mechanical steering systems.Features:
The Ultimate in Trim Control for Hydraulic Helms
Positive clicking technology for positive touch
Operates engine trim and/or jack plates
Fits hydraulic, cable, and tilt steering
Easy installation
Specifications:
"Blinker" style switches allow quick and easy trim control
Available in single or dual configurations
ATLAS™ Hydraulic Gauge Kit for 4" & 8" ATLAS™ Jack Plate - Black BezelDigital LED Position Gauge for Atlas™ Hydraulic Jack Plates.Features:
All Digital Readout
Black Face and Stainless Steel FaceGauges Available
Outer Bezel available in Stainless Steel or Black Polymer
Each Number Indicates 1/4” Rise
Numbered from 0 to 20
All AtlasTM Jacks are Pre-drilled to Fit
See pictures to the right to view both styles
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
ATLAS™ Hydraulic Gauge Kit for 4" & 8" ATLAS™ Jack Plates - Stainless Steel BezelDigital LED Position Gauge for Atlas™ Hydraulic Jack Plates.Features:
All Digital Readout
Black Face and Stainless Steel FaceGauges Available
Outer Bezel available in Stainless Steel or Black Polymer
Each Number Indicates 1/4” Rise
Numbered from 0 to 20
All AtlasTM Jacks are Pre-drilled to Fit
See pictures to the right to view both styles
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
ATLAS™ Hydraulic Gauge Kit for 6", 10", 12" & 14" ATLAS™ Jack Plate - Black BezelDigital LED Position Gauge for Atlas™ Hydraulic Jack Plates Features:
All Digital Readout
Black Face and Stainless Steel Face Gauges Available
Outer Bezel available in Stainless Steel or Black Polymer
Each Number Indicates 1/4” Rise
Numbered from 0 to 20
All ATLAS™ Jacks are pre-drilled to Fit
See pictures to the right to view both styles
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
ATLAS™ Hydraulic Gauge Kit for 6", 10", 12" & 14" ATLAS™ Jack Plates - Stainless Steel BezelDigital LED Position Gauge for Atlas™ Hydraulic Jack Plates.Features:
All Digital Readout
Black Face and Stainless Steel FaceGauges Available
Outer Bezel available in Stainless Steel or Black Polymer
Each Number Indicates 1/4” Rise
Numbered from 0 to 20
All AtlasTM Jacks are Pre-drilled to Fit
See pictures to the right to view both styles
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
BANSHEE™ Alarm PadlockProtect Your Boats, Trailers and PropertyThe BANSHEE™ is an alarm-equipped padlock for protecting any valuable item, boat or trailer from theft. When tampered with the alarm "scream like a Banshee" warding off potential thieves.Vibration-activated 110 Decibel Alarm Screams Like A Banshee When Activated Can Be De-Activated For Trailering Fits Most Trailer Couplers Weatherproof.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Box Dimensions: 1"H x 5"W x 7"L WT: 0.85 lbs
UPC: 733572082753
Bolt Kit for Jack PlatesFeatures:
For Mounting Outboard to Plate
Kit Contains: 4 each 1/2” x 3” stainless steel long bolts, 4 each 1/2” lock nuts – brass with nylon insert, 8 each 1/2” flat washers - stainless steel
Double Barb Inline Scupper Check Valve - 1-1/2" - BlackA great solution to provide a scupper check valve in the drain line. Allows use of standard thru-hull fittings in the cockpit and on the hull exterior. Features:
Prevents Backwash
Chemical Resistant Materials
Thermo-Plastic Flapper
Specifications:
Construction: Polymer
Box Dimensions: 4"H x 6"W x 9"L WT: 0.35 lbs
UPC: 733572062502
Double Barb Inline Scupper Check Valve - 3/4" - BlackA great solution to provide a scupper check valve in the drain line. Allows use of standard thru-hull fittings in the cockpit and on the hull exterior. Features:
Prevents Backwash
Chemical Resistant Materials
Thermo-Plastic Flapper
Specifications:
Construction: Polymer
Box Dimensions: 4"H x 6"W x 9"L WT: 0.3 lbs
UPC: 733572064957
Flow-Max™ Ball Scupper - ClearReplace your old worn-out flapper scupper with our new Flow-Max™ positive sealing ball scupper. A larger exit hole allows 70% more water drainage than its nearest competitor. Multiple mounting holes make retrofits quick and easy - no filling holes or re-drilling. A neutral buoyancy ball ensures the ball won't float up and break the seal. Meets all ABYC standards.The easy twist-off design makes cleaning debris a snap. Simply twist counterclockwise to remove the ball cavity, clean out and twist back on. Stainless steel security pin provided for added safety.Features:
Replaces worn out flapper scuppers
70% more drainage than competitive models
Twist off for easy cleaning
Retrofits all hole patterns
The seal is slotted to fit over 1-1/4" motor well tubes
3” Diameter x 2-1/2” H
The Flow Max Scupper only comes with one screw. The screws that screw it to the boat do not come with it. They will be different for every boat depending on the hull thickness but you will need a flat head screw. Screw included is a #4 x 1/4" Phillips Pan Head Stainless Steel Screw.
Foam Rod HoldersVersatile 6 Rod Storage Rack. Molded frame with slit closed-cell foam inserts hold up to six rods safely and securely.Features:
Stores 6 rods neatly and securely
Mount horizontally or vertically
Foam grip pads
Great for boats, RVs or garages
Economical for boat rod lockers
Corrosion proof
Durable and lightweight
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
G-Force Conservation Cull System Gen 2Features:
Simplified Cull Clip
Stainless Steel Spring Loaded One Hand Operation
Removable Floats
Color Coded Line
Non-penetrating Clip
Balance beam included
6 color-coded buoys
Allows quicker culling- More fishing time!
Uses a stronger plastic clip to hold tight around the lip
Buoy holder for quick and easy storage of each Cull Ball
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
G-Force Conservation Cull System Weight Kit - 3 Per PackWEIGHT ONLY- CLIP NOT INCLUDEDFeatures:
Reduce Stress
2 oz Weight
Increase chance of survival
Stabilizes the bass without harming them
More than 1 clip may be needed for larger fish
Simple to use clip, attaches to the G-FORCE Cull Clip
Works for Gen 1 and Gen 2 Conservation Culling System
Package comes with 3 weights
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
G-Force ELIMINATOR Black Prop Nut for Lowrance Ghost Trolling MotorOne of the latest products in the G-Force lineup is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter. Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for a longer battery and trolling motor life. Made to fit Lowrance Ghost trolling motors. This specific part comes in a black color to provide a sleek, matching aesthetic. Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut. Key Eliminator Benefits:
Machined from 6061 Billet Aluminum
O-ring dampens noise/vibration and secures the nut
Wider contact area for a more stable prop
Cooling ports aid in heat dissipation
Anodized protected
No tools needed
Available in popular colors
Visually appealing
Designed and made in the U.S.A.
Patent pending
G-Force ELIMINATOR Red Prop Nut for Garmin Force Trolling MotorOne of the latest products in the G-Force lineup is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter. Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for a longer battery and trolling motor life. Made to fit Garmin Force trolling motors. This specific part comes in red color to provide a sleek, matching aesthetic. Factory nut and washer will have to be removed prior to installing Eliminator, also if you have an anode it will have to be removed as well to use the Eliminator.Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.Key ELIMINATOR Benefits:
Machined from 6061 Billet Aluminum
O-ring dampens noise/vibration and secures the nut
Wider contact area for a more stable prop
Cooling ports aid in heat dissipation
Anodized protected
No tools needed
Available in popular colors
Visually appealing
Designed and made in the U.S.A.
Patent pending
G-Force ELIMINATOR Red Prop Nut for Lowrance Ghost Trolling MotorOne of the latest products in the G-Force lineup is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter. Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for a longer battery and trolling motor life. Made to fit Lowrance Ghost trolling motors. This specific part comes in red color to provide a sleek, matching aesthetic. Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut. Key Eliminator Benefits:
Machined from 6061 Billet Aluminum
O-ring dampens noise/vibration and secures the nut
Wider contact area for a more stable prop
Cooling ports aid in heat dissipation
Anodized protected
No tools needed
Available in popular colors
Visually appealing
Designed and made in the U.S.A.
Patent pending
G-Force ELIMINATOR Trolling Motor Black Prop Nut for Minn Kota 35-70 Trolling MotorOne of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.Made to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic.Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.Key ELIMINATOR Benefits:
Machined from 6061 Billet Aluminum
O-ring dampens noise/vibration and secures nut
Wider contact area for a more stable prop
Cooling ports aid in heat dissipation
Anodized protected
No tools needed
Available in popular colors
Visually appealing
Designed and made in the U.S.A.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
