Coastal TW 200HL- Left Handed Reel - CSTW200HLUnleash your inshore potential with the 2025 Coastal TW 200 baitcasting reel from Daiwa, engineered to dominate the shallows with unparalleled performance. The reel's HYPERDRIVE Design is the foundation of its exceptional performance, featuring HYPERDRIVE DIGIGEAR with larger and stronger gear teeth for maximum smoothness and reduced wear. The Hyper Armed Housing provides a solid feel and protection for internal components, while the Hyper Tough Clutch ensures rock-solid engagement and disengagement of the free spool.Features:
100mm Handle: 100mm Size Baitcast Handle
Automatic Tournament Drag - Uses an improved drag that exhibits a low viscosity at rest, yet becomes more viscous immediately after drag start-up. This reduces initial drag start-up inertia and, combined with the structural changes of the ATD Drag System, results in a smoother drag from the initial hook-up.
Corrosion-Resistant Ball Bearings - Lasting 12 times longer than standard stainless steel bearings. Daiwa's corrosion-resistant ball bearings feature specially treated stainless steel and a protective shield on the bearing race that seals out sand, fine grit, salt crystals, and other abrasives. The result is a longer-lasting bearing that's protected from the corrosive elements that destroy traditional bearings.
Hyper Drive Design - The Hyper Drive design consists of four new elements: Hyper Armed Housing, Hyper Drive Digigear, and Hyper Tough Clutch.
Magforce Cast Control - Daiwa's first iteration of the famous magnetic cast control system, Magforce is a spool braking system designed to slow the rotational speed through a dialled magnetic control.
T-Wing System - Daiwa's revolutionary t-Wing System addresses the issue of traditional line guide/level wind systems constricting line flow by delivering a T-shaped line guide that is larger, wider, and less restrictive. TWS allows the line to exit freely from the spool with minimal line angle and minimal friction, thereby reducing line noise and backlash, and delivering more accurate and longer casts.
Specifications:
Bearings: 2CRBB, 1RB
Gear Ratio: 7.3
Line Per Crank (in): 34.3
Weight (oz): 8.1
Mono Capacity: 12/250, 16/185
J-Braid Capacity: 30/220, 40/155
Drag Max: 13.2
Specifications:
Bearing Count: 2+1
Gear Ratio: 7.3:1
Handle Position: Left
Max Drag: 13.2 lbs
Retrieve Rate: 34.3"
Series: Coastal
Style: Baitcast Low Profile
Coastal TWS 80 Baitcast Reel - CLTW80HDaiwa designed the Coastal TW80 with its advanced Hyper Drive Design. Our HYPER DRIVE DESIGN is comprised of four key technologies- HYPER DRIVE DIGIGEAR, HYPER DOUBLE SUPPORT, HYPER ARMED HOUSING, and HYPER TOUGH CLUTCH.Features:
HYPERDRIVE DIGIGEAR- a brand-new gear design makes the teeth of the gears more efficient at transferring power, therefore making the gear set feel smoother, more powerful, and also reducing gear noise.
HYPER DOUBLE SUPPORT- a two-bearing support system for the reel's pinion gear means no flex and an ultra-smooth retrieve/ gear rotation.
HYPER ARMED HOUSING- the reel features an aluminum frame and side plate for maximum rigidity and precision performance of the internal components.
HYPER TOUGH CLUTCH- a redesigned and reinforced clutch mechanism that increases durability and performance.
Another bonus for the Coastal 80 is its UTD (Ultimate Tournament Drag) system, which includes impregnated drag discs that are about 30 times more durable than typical discs, considerably increasing the effective drag power while also reducing start-up resistance.TWSDaiwa’s revolutionary T-Wing System addresses the issue of traditional line guide/level wind systems constricting line flow by delivering a T-shaped line guide that is larger, wider, and less restrictive. TWS allows lines to exit freely from the spool with minimal line angle and minimal friction, thereby reducing line noise and backlash, and delivering more accurate and longer casts.UTD DragA system that combines ultra smooth low inertia with ultimate fish-stopping power. UTD combines advanced carbon washers, alloy, and stainless steel drag plates with specially designed grease for ultra-smooth performance. Swept HandleDaiwa's exclusive swept handle moves the paddles closer to the rod's centerline. The result is less wobble of the rod and reel in your hand as you crank. That means less wasted energy - a more powerful retrieve. Hyper Drive DesignThe design concepts are the pinnacle of durability and innovation. The Hyper Drive Design consists of four new elements: Hyper Armed Housing, Hyper Drive Digigear, Hyper Double Support, Hyper Tough Clutch.Specifications:
Bearings: 4CRBB+1
Gear Ratio: 7.1
Line Per Crank: 27.9"
Weight: 6.5oz
Mono Capacity: 16/105
J Braid Capacity: 20/160, 30/115
Drag Max: 11
Specifications:
Bearing Count: 4CRBB + 1
Gear Ratio: 7.1
Handle Position: Right
Max Drag: 11 lbs
Retrieve Rate: 27.9"
Series: Coastal
Style: Baitcast Low Profile
Box Dimensions: 3"H x 5"W x 5"L WT: 0.6 lbs
UPC: 043178922651
Coastal TWS 80 Left Hand Baitcast Reel - CLTW80HLDaiwa designed the Coastal TW80 with its advanced Hyper Drive Design. Our HYPER DRIVE DESIGN is comprised of four key technologies- HYPER DRIVE DIGIGEAR, HYPER DOUBLE SUPPORT, HYPER ARMED HOUSING, and HYPER TOUGH CLUTCH.Features:
HYPERDRIVE DIGIGEAR- a brand-new gear design makes the teeth of the gears more efficient at transferring power, therefore making the gear set feel smoother, more powerful, and also reducing gear noise.
HYPER DOUBLE SUPPORT- a two-bearing support system for the reel's pinion gear means no flex and an ultra-smooth retrieve/ gear rotation.
HYPER ARMED HOUSING- the reel features an aluminum frame and side plate for maximum rigidity and precision performance of the internal components.
HYPER TOUGH CLUTCH- a redesigned and reinforced clutch mechanism that increases durability and performance.
Another bonus for the Coastal 80 is its UTD (Ultimate Tournament Drag) system, which includes impregnated drag discs that are about 30 times more durable than typical discs, considerably increasing the effective drag power while also reducing start-up resistance.TWSDaiwa’s revolutionary T-Wing System addresses the issue of traditional line guide/level wind systems constricting line flow by delivering a T-shaped line guide that is larger, wider, and less restrictive. TWS allows lines to exit freely from the spool with minimal line angle and minimal friction, thereby reducing line noise and backlash, and delivering more accurate and longer casts.UTD DragA system that combines ultra smooth low inertia with ultimate fish-stopping power. UTD combines advanced carbon washers, alloy, and stainless steel drag plates with specially designed grease for ultra-smooth performance. Swept HandleDaiwa's exclusive swept handle moves the paddles closer to the rod's centerline. The result is less wobble of the rod and reel in your hand as you crank. That means less wasted energy - a more powerful retrieve. Hyper Drive DesignThe design concepts are the pinnacle of durability and innovation. The Hyper Drive Design consists of four new elements: Hyper Armed Housing, Hyper Drive Digigear, Hyper Double Support, Hyper Tough Clutch.Specifications:
Bearings: 4CRBB+1
Gear Ratio: 7.1
Line Per Crank: 27.9"
Weight: 6.5oz
Mono Capacity: 16/105
J Braid Capacity: 20/160, 30/115
Drag Max: 11
Specifications:
Bearing Count: 4CRBB + 1
Gear Ratio: 7.1
Handle Position: Left
Max Drag: 11 lbs
Retrieve Rate: 27.9"
Series: Coastal
Style: Baitcast Low Profile
Box Dimensions: 3"H x 5"W x 6"L WT: 0.55 lbs
UPC: 043178922668
D-Box Feeder Case - 3600 Medium - DeepDaiwa’s range of tackle trays, D-Box, has been designed and developed to produce a cohesive range of purpose-built storage perfectly suited to the modern angler.Available in a range of sizes and depths, Daiwa’s D-BOX range is made from recycled polypropylene, a low-impact material that delivers no toxic waste, no emissions, no fluorocarbons, and no halogens in its process.All Daiwa D-Box models feature a 4-sided clasp system to ensure secure latching and to fully compress the water-resistant gasket seal, which is installed 360 degrees around the lids of all D-Box models.Each box was carefully designed to maximize storage and versatility, with features like spinner bait storage incorporated into the models.Features:
4 Latches - Securely keeps the lid closed, even when the tackle box is being thrown around in the roughest conditions.
Clear Cover - Allows you to see your gear without opening the lid, making it easy to find what you need.
Customizable - Can be configured to meet your specific needs, such as adding dividers or compartments.
Waterproof Sealing - Prevent water from getting to prized tackle, keeping the gear dry.
Specifications:Size: Medium tackle case with deep depth
D-Box Feeder Case - 3600 RegularDaiwa’s range of tackle trays, D-Box, has been designed and developed to produce a cohesive range of purpose-built storage perfectly suited to the modern angler.Available in a range of sizes and depths, Daiwa’s D-BOX range is made from recycled polypropylene, a low-impact material that delivers no toxic waste, no emissions, no fluorocarbons, and no halogens in its process.All Daiwa D-Box models feature a 4-sided clasp system to ensure secure latching and to fully compress the water-resistant gasket seal, which is installed 360 degrees around the lids of all D-Box models.Each box was carefully designed to maximize storage and versatility, with features like spinnerbait storage incorporated into the models.Features:
4 Latches - Securely keeps the lid closed, even when the tackle box is being thrown around in the roughest conditions.
Clear Cover - Allows you to see your gear without opening the lid, making it easy to find what you need.
Customizable - Can be configured to meet your specific needs, such as adding dividers or compartments.
Waterproof Sealing - Prevent water from getting to prized tackle, keeping the gear dry.
Specifications:Size: Medium tackle case with regular depth
D-Box Feeder Case - 3600 ShallowDaiwa’s range of tackle trays, D-Box, has been designed and developed to produce a cohesive range of purpose-built storage perfectly suited to the modern angler.Available in a range of sizes and depths, Daiwa’s D-BOX range is made from recycled polypropylene, a low-impact material that delivers no toxic waste, no emissions, no fluorocarbons, and no halogens in its process.All Daiwa D-Box models feature a 4-sided clasp system to ensure secure latching and to fully compress the water-resistant gasket seal, which is installed 360 degrees around the lids of all D-Box models.Each box was carefully designed to maximize storage and versatility, with features like spinnerbait storage incorporated into the models.Features:
4 Latches - Securely keeps the lid closed, even when the tackle box is being thrown around in the roughest conditions.
Clear Cover - Allows you to see your gear without opening the lid, making it easy to find what you need.
Customizable - Can be configured to meet your specific needs, such as adding dividers or compartments.
Waterproof Sealing - Prevent water from getting to prized tackle, keeping the gear dry.
Specifications:Size: Medium tackle case with shallow depth Specifications:
Tackle Storage: Tackle Box
Box Dimensions: 2"H x 4"W x 9"L WT: 0.5 lbs
UPC: 043178174913
D-Box Feeder Case - 3700 Large - DeepDaiwa’s range of tackle trays, D-Box, has been designed and developed to produce a cohesive range of purpose-built storage perfectly suited to the modern angler.Available in a range of sizes and depths, Daiwa’s D-BOX range is made from recycled polypropylene, a low-impact material that delivers no toxic waste, no emissions, no fluorocarbons, and no halogens in its process.All Daiwa D-Box models feature a 4-sided clasp system to ensure secure latching and to fully compress the water-resistant gasket seal, which is installed 360 degrees around the lids of all D-Box models.Each box was carefully designed to maximize storage and versatility, with features like spinner bait storage incorporated into the models.Features:
4 Latches - Securely keeps the lid closed, even when the tackle box is being thrown around in the roughest conditions.
Clear Cover - Allows you to see your gear without opening the lid, making it easy to find what you need.
Customizable - Can be configured to meet your specific needs, such as adding dividers or compartments.
Waterproof Sealing - Prevent water from getting to prized tackle, keeping the gear dry.
Specifications:Size: Large tackle case with deep depth
D-Box Feeder Case - 3700 Large - RegularDaiwa’s range of tackle trays, D-Box, has been designed and developed to produce a cohesive range of purpose-built storage perfectly suited to the modern angler.Available in a range of sizes and depths, Daiwa’s D-BOX range is made from recycled polypropylene, a low-impact material that delivers no toxic waste, no emissions, no fluorocarbons, and no halogens in its process.All Daiwa D-Box models feature a 4-sided clasp system to ensure secure latching and to fully compress the water-resistant gasket seal, which is installed 360 degrees around the lids of all D-Box models.Each box was carefully designed to maximize storage and versatility, with features like spinner bait storage incorporated into the models.Features:
4 Latches - Securely keeps the lid closed, even when the tackle box is being thrown around in the roughest conditions.
Clear Cover - Allows you to see your gear without opening the lid, making it easy to find what you need.
Customizable - Can be configured to meet your specific needs, such as adding dividers or compartments.
Waterproof Sealing - Prevent water from getting to prized tackle, keeping the gear dry.
Specifications:Size: Large tackle case with regular depth
D-Box Feeder Case - 3700 Large - ShallowDaiwa’s range of tackle trays, D-Box, has been designed and developed to produce a cohesive range of purpose-built storage perfectly suited to the modern angler.Available in a range of sizes and depths, Daiwa’s D-BOX range is made from recycled polypropylene, a low-impact material that delivers no toxic waste, no emissions, no fluorocarbons, and no halogens in its process.All Daiwa D-Box models feature a 4-sided clasp system to ensure secure latching and to fully compress the water-resistant gasket seal, which is installed 360 degrees around the lids of all D-Box models.Each box was carefully designed to maximize storage and versatility, with features like spinner bait storage incorporated into the models.Features:
4 Latches - Securely keeps the lid closed, even when the tackle box is being thrown around in the roughest conditions.
Clear Cover - Allows you to see your gear without opening the lid, making it easy to find what you need.
Customizable - Can be configured to meet your specific needs, such as adding dividers or compartments.
Waterproof Sealing - Prevent water from getting to prized tackle, keeping the gear dry.
Specifications:Size: Large tackle case with shallow depth
D-Box Tackle BagFeatures:
Designed for Daiwa D-BOXES– Fit with Daiwa water-resistant D-BOX in MEDIUM SIZES, supplied also together with 3 different depth D-BOXES – Great for your tackle management
Strategically applied fabrics and materials – The padded wall protects your boxes safely, the outer surface is applied water-repellent finish, rubberized bottom prevents the intrusion of water.
ABS Material zipper– Durable and without corroding.
What's Included?
1x D-box MS
1x D-Box MR
1x D-Box MD
D-Vec Cooler BackpackFeatures:
Cooling Compartment on the bottom – You can store your packed lunch or cold drinks here
Easy to clean
Strategically applied fabrics and materials – 300D Polyester material with a water repellent finish
No soak water and easy to clean, waterproof bottom protection
Rod transport mount on both sides – you can bring travel rods with ease
Capacity 32 quarts
D-Vec Hip BagFeatures:
300D water repellent fabric on the surface
No soak water and easy to clean
Purpose-Built Accessories:
1x Side Padded Pocket for Cell phone
1x Large Pocket for Pliers
Adjustable Strap
D-Vec Rig PouchFeatures:
300D water repellent fabric on the surface
No soak water and easy to clean
10 Inner Pouches + 1 Zipped inner Compartment – you can store different pre-made rigs inside with additional small accessories inside the zip bag, such as swivels, split rings, and hooks
Carrying Strap
Eliminator Spinning Reel - Eliminator2500 The Eliminator Series of Spinning Reels range from a compact 2500 series reel holding a 6-pound test to a beefy 8000 series reel that can pack on the 30-pound test. The reels are also Well Suited For Braided Line Applications. The reel body is constructed utilizing the Hardbodyz Concept. The Aluminum Frame and Sideplate combine to form a strong rigid housing for the state-of-the-art Digigears cut to smooth, precise standards. The attractive yet durable Anodized Finish is scratch and corrosion-resistant.The attractive yet durable Anodized Finish is scratch and corrosion-resistant. The Air Rotor design is 15-percent lighter yet more precisely balanced than competing reels. The stout Aluminum Spool can carry the increased pressures of braided lines and houses buttery smooth, long-lasting Felt Drags. Slide-in handles for easy left or right-hand crank conversion. Suitable for fresh and saltwater applications. If you are looking for a high-quality line of workhorse-like reels at a smart price, then you owe yourself a look at the ELIMINATOR SERIES SPINNING REELS.Specifications:
Bearing: 4BB + 1RB
Gear Ration: 5.6:1
Line Per Crank: 33.2
Weight (oz): 9.9
Mono Capacity: 6/210, 8/170, 10/140
J Braid Capacity: 20/170, 30/120
Drag Max: 13.2
Specifications:
Bearing Count: 4+1
Gear Ratio: 5.6:1
Handle Position: Left/Right
Max Drag: 13.2 lbs
Retrieve Rate: 33.2"
Series: Eliminator
Style: Spinning
Box Dimensions: 4"H x 6"W x 6"L WT: 0.4 lbs
UPC: 043178922378
Eliminator Spinning Reel - Eliminator3000 The Eliminator Series of Spinning Reels range from a compact 2500 series reel holding a 6-pound test to a beefy 8000 series reel that can pack on the 30-pound test. The reels are also Well Suited For Braided Line Applications. The reel body is constructed utilizing the Hardbodyz Concept. The Aluminum Frame and Sideplate combine to form a strong rigid housing for the state-of-the-art Digigears cut to smooth, precise standards. The attractive yet durable Anodized Finish is scratch and corrosion-resistant.The attractive yet durable Anodized Finish is scratch and corrosion-resistant. The Air Rotor design is 15-percent lighter yet more precisely balanced than competing reels. The stout Aluminum Spool can carry the increased pressures of braided lines and houses buttery smooth, long-lasting Felt Drags. Slide-in handles for easy left or right-hand crank conversion. Suitable for fresh and saltwater applications. If you are looking for a high-quality line of workhorse-like reels at a smart price, then you owe yourself a look at the ELIMINATOR SERIES SPINNING REELS.Specifications:
Bearing: 4BB + 1RB
Gear Ration: 5.6:1
Line Per Crank: 37.4
Weight (oz): 11.3
Mono Capacity: 8/240, 10/200, 12/170
J Braid Capacity: 12/240, 30/190
Drag Max: 15.4
Specifications:
Bearing Count: 4+1
Gear Ratio: 5.6:1
Handle Position: Left/Right
Max Drag: 15.4 lbs
Retrieve Rate: 37.4"
Series: Eliminator
Style: Spinning
Box Dimensions: 4"H x 5"W x 5"L WT: 1 lbs
UPC: 043178922385
Eliminator Spinning Reel - Eliminator4000 The Eliminator Series of Spinning Reels range from a compact 2500 series reel holding a 6-pound test to a beefy 8000 series reel that can pack on the 30-pound test. The reels are also Well Suited For Braided Line Applications. The reel body is constructed utilizing the Hardbodyz Concept. The Aluminum Frame and Sideplate combine to form a strong rigid housing for the state-of-the-art Digigears cut to smooth, precise standards. The attractive yet durable Anodized Finish is scratch and corrosion-resistant.The attractive yet durable Anodized Finish is scratch and corrosion-resistant. The Air Rotor design is 15-percent lighter yet more precisely balanced than competing reels. The stout Aluminum Spool can carry the increased pressures of braided lines and houses buttery smooth, long-lasting Felt Drags. Slide-in handles for easy left or right-hand crank conversion. Suitable for fresh and saltwater applications. If you are looking for a high-quality line of workhorse-like reels at a smart price, then you owe yourself a look at the ELIMINATOR SERIES SPINNING REELS.Specifications:
Bearing: 4BB + 1RB
Gear Ration: 5.7:1
Line Per Crank: 39.9
Weight (oz): 14.5
Mono Capacity: 10/300, 12/260, 14/210
J Braid Capacity: 30/280, 40/200
Drag Max: 17.6
Specifications:
Bearing Count: 4+1
Gear Ratio: 5.7:1
Handle Position: Left/Right
Max Drag: 17.6 lbs
Retrieve Rate: 39.9"
Series: Eliminator
Style: Spinning
Box Dimensions: 4"H x 6"W x 6"L WT: 1.25 lbs
UPC: 043178922392
Eliminator Spinning Reel - Eliminator4500 The Eliminator Series of Spinning Reels range from a compact 2500 series reel holding a 6-pound test to a beefy 8000 series reel that can pack on the 30-pound test. The reels are also Well Suited For Braided Line Applications. The reel body is constructed utilizing the Hardbodyz Concept. The Aluminum Frame and Sideplate combine to form a strong rigid housing for the state-of-the-art Digigears cut to smooth, precise standards. The attractive yet durable Anodized Finish is scratch and corrosion-resistant.The attractive yet durable Anodized Finish is scratch and corrosion-resistant. The Air Rotor design is 15-percent lighter yet more precisely balanced than competing reels. The stout Aluminum Spool can carry the increased pressures of braided lines and houses buttery smooth, long-lasting Felt Drags. Slide-in handles for easy left or right-hand crank conversion. Suitable for fresh and saltwater applications. If you are looking for a high-quality line of workhorse-like reels at a smart price, then you owe yourself a look at the ELIMINATOR SERIES SPINNING REELS.Specifications:
Bearing: 4BB + 1RB
Gear Ration: 5.7:1
Line Per Crank: 43.1
Weight (oz): 21.7
Mono Capacity: 14/350, 17/280, 20/210
J Braid Capacity: 40/340, 50/270
Drag Max: 17.6
Specifications:
Bearing Count: 4+1
Gear Ratio: 5.7:1
Handle Position: Left/Right
Max Drag: 17.6 lbs
Retrieve Rate: 43.1"
Series: Eliminator
Style: Spinning
Box Dimensions: 5"H x 7"W x 7"L WT: 1.9 lbs
UPC: 043178922408
Eliminator Spinning Reel - Eliminator5000 The Eliminator Series of Spinning Reels range from a compact 2500 series reel holding a 6-pound test to a beefy 8000 series reel that can pack on the 30-pound test. The reels are also Well Suited For Braided Line Applications. The reel body is constructed utilizing the Hardbodyz Concept. The Aluminum Frame and Sideplate combine to form a strong rigid housing for the state-of-the-art Digigears cut to smooth, precise standards. The attractive yet durable Anodized Finish is scratch and corrosion-resistant.The attractive yet durable Anodized Finish is scratch and corrosion-resistant. The Air Rotor design is 15-percent lighter yet more precisely balanced than competing reels. The stout Aluminum Spool can carry the increased pressures of braided lines and houses buttery smooth, long-lasting Felt Drags. Slide-in handles for easy left or right-hand crank conversion. Suitable for fresh and saltwater applications. If you are looking for a high-quality line of workhorse-like reels at a smart price, then you owe yourself a look at the ELIMINATOR SERIES SPINNING REELS.Specifications:
Bearing: 4BB + 1RB
Gear Ration: 5.7:1
Line Per Crank: 47.4
Weight (oz): 22.5
Mono Capacity: 14/470, 17/380, 20/280
J Braid Capacity: 50/360, 65/310
Drag Max: 17.6
Specifications:
Bearing Count: 4+1
Gear Ratio: 5.7:1
Handle Position: Left/Right
Max Drag: 17.6 lbs
Retrieve Rate: 47.4"
Series: Eliminator
Style: Spinning
Box Dimensions: 5"H x 7"W x 7"L WT: 1.8 lbs
UPC: 043178922415
Eliminator Spinning Reel - Eliminator6500 The Eliminator Series of Spinning Reels range from a compact 2500 series reel holding a 6-pound test to a beefy 8000 series reel that can pack on the 30-pound test. The reels are also Well Suited For Braided Line Applications. The reel body is constructed utilizing the Hardbodyz Concept. The Aluminum Frame and Sideplate combine to form a strong rigid housing for the state-of-the-art Digigears cut to smooth, precise standards. The attractive yet durable Anodized Finish is scratch and corrosion-resistant.The attractive yet durable Anodized Finish is scratch and corrosion-resistant. The Air Rotor design is 15-percent lighter yet more precisely balanced than competing reels. The stout Aluminum Spool can carry the increased pressures of braided lines and houses buttery smooth, long-lasting Felt Drags. Slide-in handles for easy left or right-hand crank conversion. Suitable for fresh and saltwater applications. If you are looking for a high-quality line of workhorse-like reels at a smart price, then you owe yourself a look at the ELIMINATOR SERIES SPINNING REELS.Specifications:
Bearing: 4BB + 1RB
Gear Ration: 5.3:1
Line Per Crank: 48.7
Weight (oz): 29.1
Mono Capacity: 20/370, 25/310, 30/260
J Braid Capacity: 65/440, 80/330
Drag Max: 26.4
Specifications:
Bearing Count: 4+1
Gear Ratio: 5.3:1
Handle Position: Left/Right
Max Drag: 26.4 lbs
Retrieve Rate: 48.7"
Series: Eliminator
Style: Spinning
Box Dimensions: 5"H x 7"W x 8"L WT: 2.4 lbs
UPC: 043178922422
Eliminator Spinning Reel - Eliminator8000 The Eliminator Series of Spinning Reels range from a compact 2500 series reel holding a 6-pound test to a beefy 8000 series reel that can pack on the 30-pound test. The reels are also Well Suited For Braided Line Applications. The reel body is constructed utilizing the Hardbodyz Concept. The Aluminum Frame and Sideplate combine to form a strong rigid housing for the state-of-the-art Digigears cut to smooth, precise standards. The attractive yet durable Anodized Finish is scratch and corrosion-resistant.The attractive yet durable Anodized Finish is scratch and corrosion-resistant. The Air Rotor design is 15-percent lighter yet more precisely balanced than competing reels. The stout Aluminum Spool can carry the increased pressures of braided lines and houses buttery smooth, long-lasting Felt Drags. Slide-in handles for easy left or right-hand crank conversion. Suitable for fresh and saltwater applications. If you are looking for a high-quality line of workhorse-like reels at a smart price, then you owe yourself a look at the ELIMINATOR SERIES SPINNING REELS.Specifications:
Bearing: 4BB + 1RB
Gear Ration: 5.3:1
Line Per Crank: 53.3
Weight (oz): 29.8
Mono Capacity: 20/550, 25/440, 30/370
J Braid Capacity: 65/590, 80/440
Drag Max: 26.4
Specifications:
Bearing Count: 4+1
Gear Ratio: 5.3:1
Handle Position: Left/Right
Max Drag: 26.4 lbs
Retrieve Rate: 53.3"
Series: Eliminator
Style: Spinning
Box Dimensions: 5"H x 7"W x 8"L WT: 2.4 lbs
UPC: 043178922439
Emcast BR LT Spinning Reel - ECLTBR2500 The Emcast Bite N’ Run feature allows the line to pay off the reel when a gamefish takes a live or natural bait. Once the line is paying off the reel, the refined Auto Clutch will put the reel in gear allowing a solid hook set. It is much more controlled than simply opening up the bail, the traditional method used when fishing natural baits with spinning reels. The reel designs are in the LT Concept of light yet tough. The Carbon Light Body is substantially lighter yet just as strong as traditional materials. To further the concept, the Air Rotor is also lighter yet just as strong. A slick Machined Aluminum Handle is powerful yet comfortable to the hand. When a gamefish is taking a bait offering and the reel is put in gear, the ATD or Advanced Tournament Drag System, utilizing a proprietary grease, allows the smooth payoff of line no matter how long the run. A 5.2 to 1 Gear Ratio shades the reel toward pulling power. If you are looking for an exciting reel tailored for the live and natural bait fisherman, look to the Emcast BR LT to put your presentation at the take.Specifications:
Bearing: 3BB + 1
Gear Ration: 5.2:1
Line Per Crank: 28.7
Weight (oz): 10.4
Mono Capacity: 6/160, 8/110
J Braid Capacity: 8/200, 10/170
Drag Max: 22
Specifications:
Bearing Count: 3+1
Gear Ratio: 5.2:1
Handle Position: Left/Right
Max Drag: 22 lbs
Retrieve Rate: 28.7"
Series: Emcast BR
Style: Spinning
Box Dimensions: 4"H x 6"W x 6"L WT: 1.1 lbs
UPC: 043178595985
Emcast BR LT Spinning Reel - ECLTBR3000 The Emcast Bite N’ Run feature allows the line to pay off the reel when a gamefish takes a live or natural bait. Once the line is paying off the reel, the refined Auto Clutch will put the reel in gear allowing a solid hook set. It is much more controlled than simply opening up the bail, the traditional method used when fishing natural baits with spinning reels. The reel designs are in the LT Concept of light yet tough. The Carbon Light Body is substantially lighter yet just as strong as traditional materials. To further the concept, the Air Rotor is also lighter yet just as strong. A slick Machined Aluminum Handle is powerful yet comfortable to the hand. When a gamefish is taking a bait offering and the reel is put in gear, the ATD or Advanced Tournament Drag System, utilizing a proprietary grease, allows the smooth payoff of line no matter how long the run. A 5.2 to 1 Gear Ratio shades the reel toward pulling power. If you are looking for an exciting reel tailored for the live and natural bait fisherman, look to the Emcast BR LT to put your presentation at the take.Specifications:
Bearing: 3BB + 1
Gear Ration: 5.2:1
Line Per Crank: 30.6
Weight (oz): 10.6
Mono Capacity: 8/160, 10/130
J Braid Capacity: 8/220, 10/185
Drag Max: 22
Specifications:
Bearing Count: 3+1
Gear Ratio: 5.2:1
Handle Position: Left/Right
Max Drag: 22 lbs
Retrieve Rate: 30.6"
Series: Emcast BR
Style: Spinning
Box Dimensions: 4"H x 6"W x 6"L WT: 1 lbs
UPC: 043178596005
Emcast BR LT Spinning Reel - ECLTBR4000-CThe Emcast Bite N’ Run feature allows the line to pay off the reel when a gamefish takes a live or natural bait. Once the line is paying off the reel, the refined Auto Clutch will put the reel in gear allowing a solid hook set. It is much more controlled than simply opening up the bail, the traditional method used when fishing natural baits with spinning reels. The reel designs are in the LT Concept of light yet tough. The Carbon Light Body is substantially lighter yet just as strong as traditional materials. To further the concept, the Air Rotor is also lighter yet just as strong. A slick Machined Aluminum Handle is powerful yet comfortable to the hand. When a gamefish is taking a bait offering and the reel is put in gear, the ATD or Advanced Tournament Drag System, utilizing a proprietary grease, allows the smooth payoff of line no matter how long the run. A 5.2 to 1 Gear Ratio shades the reel toward pulling power. If you are looking for an exciting reel tailored for the live and natural bait fisherman, look to the Emcast BR LT to put your presentation at the take.Specifications:
Bearing: 3BB + 1
Gear Ration: 5.2:1
Line Per Crank: 32.5
Weight (oz): 11.3
Mono Capacity: 12/160, 14/140
J Braid Capacity: 10/220, 15/185
Drag Max: 26.4
Specifications:
Bearing Count: 3+1
Gear Ratio: 5.2:1
Handle Position: Left/Right
Max Drag: 26.4 lbs
Retrieve Rate: 32.5"
Series: Emcast BR
Style: Spinning
Box Dimensions: 4"H x 6"W x 6"L WT: 1.35 lbs
UPC: 043178596029
Emcast BR LT Spinning Reel - ECLTBR5000-CThe Emcast Bite N’ Run feature allows the line to pay off the reel when a gamefish takes a live or natural bait. Once the line is paying off the reel, the refined Auto Clutch will put the reel in gear allowing a solid hook set. It is much more controlled than simply opening up the bail, the traditional method used when fishing natural baits with spinning reels. The reel designs are in the LT Concept of light yet tough. The Carbon Light Body is substantially lighter yet just as strong as traditional materials. To further the concept, the Air Rotor is also lighter yet just as strong. A slick Machined Aluminum Handle is powerful yet comfortable to the hand. When a gamefish is taking a bait offering and the reel is put in gear, the ATD or Advanced Tournament Drag System, utilizing a proprietary grease, allows the smooth payoff of line no matter how long the run. A 5.2 to 1 Gear Ratio shades the reel toward pulling power. If you are looking for an exciting reel tailored for the live and natural bait fisherman, look to the Emcast BR LT to put your presentation at the take.Specifications:
Bearing: 3BB + 1
Gear Ration: 5.2:1
Line Per Crank: 34.5
Weight (oz): 11.1
Mono Capacity: 14/250, 20/160
J Braid Capacity: 15/320, 20/280
Drag Max: 26.4
Specifications:
Bearing Count: 3+1
Gear Ratio: 5.2:1
Handle Position: Left/Right
Max Drag: 26.4 lbs
Retrieve Rate: 34.5"
Series: Emcast BR
Style: Spinning
Box Dimensions: 5"H x 6"W x 6"L WT: 1.2 lbs
UPC: 043178596043
