Raptor Travel Cover for 8'Protects 8' Raptor models from road hazards while trailering. Custom-fit with an all-weather, corrosion-resistant zipper. UV resistant black vinyl. Not intended for use while on the water.Features:
Compatible with 8' Raptor Models Only
Color: Black
DeckHand 40
20- to 40-pound anchor capacity (anchor not included).
Pre-spooled with 100 feet of 800-lb test rope.
Auto-drift feature automatically stops the motor when the anchor touches bottom (or hits an obstacle); when slack in the rope becomes tight, rope is automatically released; lock the winch with the touch of a button.
Universal davit can be mounted at base of DeckHand or in remote position on boat deck; stows anchor horizontally to eliminate anchor swing.
Anchor shackle allows for easy changeover from anchor to anchor.
Stow and deploy switch integrated into the base of the unit.
Corded remote stow and deploy switch (sold separately) allows operation of DH-40 from anywhere on the boat.
Compatible with MKA-16-02 quick release bracket ideal for easy removal for boat cover clearance or clearing the deck during non-use (requires holes to be drilled in top plate of quick release bracket).
12-volt battery operation.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Rope Diameter (Inches): 3/16"
Vertical/Horizontal: Horizontal
Freefall: No
Box Dimensions: 12"H x 14"W x 17"L WT: 24 lbs
UPC: 029402017843
Owner's Manual (pdf)
Toggle Anchor KitGame-changing hardware for mounting trolling motors and table and seat pedestals, especially on decks and bulkheads where access is limited. Secures any accessory that will receive a high amount of torque at the fastening location. Features:
Stainless steel toggle 2” long x 0.45” wide
Accepts ¼”-20 fasteners
Requires a ½” mounting hole
Great for tables, seat bases, and trolling motors
Mooring Snubber Kit with 3/8" x 20' Dock LineThis flexible snubber stretches to absorb shock and protect boats, cleats, and lines from the strain of wind and water. The resilience of the snubber can be adjusted to conditions by increasing or decreasing the amount of line wrapped around it. Includes snubber and 20 ft. of solid braided multifilament polypropylene dock line.Specifications:
Thickness (inch): 3/8"
Length (feet): 20'
Color: Blue
Specifications:
Color: Blue
Length (Feet): 20.0
Rope Diameter (Inches): 0.375
Box Dimensions: 3"H x 6"W x 10"L WT: 1.05 lbs
UPC: 022697117304
Quick Guide (pdf)
Launch Line 5/16" x 30'Helps assist or steer your boat when launching or loading.Features:
Solid braid MFP line includes spring hook and handy foam grip
Easy to handle floatable line that dries quickly
UV Resistant
Specifications:
Thickness (inch): 5/16"
Length (feet): 30'
Color: Blue
Specifications:
Color: Blue
Length (Feet): 30.0
Rope Diameter (Inches): 0.31
Box Dimensions: 3"H x 6"W x 10"L WT: 1.1 lbs
UPC: 022697117328
Quick Guide (pdf)
Mooring Fender Lock Kit - Stainless Steel PairStainless Steel Fender Lock Kit 11575-3 makes hanging or moving fenders quick and easy. The two-part kit is easy to install with stainless steel screws or bolts (not included). Tie fenders to the key part of the kit then twist into the deck plate to secure fenders to the gunwale. No need to untie and retie fenders when moving or docking; just twist the key for installation or removal.Features:
Accepts up to 1/2-inch diameter fender line
Stainless steel construction and includes mounting hardware
Includes two flush-mount stainless steel mounting plates and two stainless steel keys
Quickly and easily install or move fenders when mooring
Dimensions:
Width: (inch) 2"
Height: (inch) 1"
*Line sold separately Quick Guide (pdf)Owner's Manual (pdf)
Zig-Zag Fender Hanger - Pair with 4' Fender LinesNo need for knots in your fender lines. Keeps fenders in place with a simple system. Put a line over the rail and weave it through the zig-zag teeth.Features:
Pair, 4 ft. fender lines included
Quick and easy to use
Quick Guide (pdf)
Kayak Anchor Kit - 1.5lb1.5 lb Grappling folding anchorFeatures:
Includes 30' of 3/16" nylon anchor line
Includes 1/4" Anchor Shackle
Exceptional 4-fluke holding power
Easy to deploy or stow away
PWC Anchor Kit - 3lb3 lb Grappling Folding AnchorFeatures:
Includes storage bag
For small boats, sailboats, personal watercraft, inflatables, and canoes
For sand, rock, mud, and gravel bottoms
Easy to deploy or stow away
Raptor Adapter Bracket 2" Spacer - Black Mounts between your jack plate or sandwich adapter and jack plate adapter bracket, for use in port or starboard applications.Features:
Provides 2” of additional outboard engine clearance by spacing raptor mounting brackets from jack plate
Light-weight, single-piece aluminum construction for superior strength
Powder-coated exterior resists corrosion in all environments and applications
Includes stainless steel mounting hardware
Slotted mounting holes for position adjustment
5-year warranty
Raptor Jack Plate Adapter Bracket - Port - 8" Setback - 6" Rise - BlackMounts directly to your jack plate on the starboard side of your boat providing 8 inches of setback and 6 inches of vertical rise for Minn Kota Raptor Shallow Water Anchors.Features:
Adds 8 inches of setback from the transom and 6 inches of vertical rise
Lightweight, single-piece aluminum construction for superior strength
Powder-coated exterior resists corrosion in all environments and applications
Includes stainless steel mounting hardware
Slotted mounting holes for position adjustment
5-year warranty
Brochure (pdf)
Raptor Universal Sandwich Adapter - BlackMounts between your jack plate and transom or between the outboard and transom, for use in both port and starboard Raptor mounting applications.Features:
Allows installation of jack plate brackets without a jack plate
Lightweight, single-piece aluminum construction for superior strength
Powder-coated exterior resists corrosion in all environments and applications
Includes stainless steel mounting hardware
Slotted mounting holes for position adjustment
5-year warranty
Raptor Universal Sandwich Adapter - WhiteMounts between your jack plate and transom or between the outboard and transom, for use in both port and starboard Raptor mounting applications.Features:
Allows installation of jack plate brackets without a jack plate
Lightweight, single-piece aluminum construction for superior strength
Powder-coated exterior resists corrosion in all environments and applications
Includes stainless steel mounting hardware
Slotted mounting holes for position adjustment
5-year warranty
Raptor Travel Cover for 10'Protects 10' Raptor models from road hazards while trailering. Custom-fit with an all-weather, corrosion-resistant zipper. UV resistant black vinyl. Not intended for use while on the water.Features:
Compatible with 10' Raptor Models Only
Color: Black
Raptor Jack Plate Adapter Bracket - Starboard - 8" Setback - 6" Rise - BlackMounts directly to your jack plate on the starboard side of your boat providing 8 inches of setback and 6 inches of vertical rise for Minn Kota Raptor Shallow Water Anchors.Features:
Adds 8 inches of setback from the transom and 6 inches of vertical rise
Lightweight, single-piece aluminum construction for superior strength
Powder-coated exterior resists corrosion in all environments and applications
Includes stainless steel mounting hardware
Slotted mounting holes for position adjustment
5-year warranty
Brochure (pdf)
Raptor Jack Plate Adapter Bracket - Starboard - 5" Setback - 4" Rise - WhiteMounts directly to your jack plate on the starboard side of your boat providing 5 inches of setback and 4 inches of vertical rise for Minn Kota Raptor Shallow Water Anchors Features:
Adds 5 inches of setback from the transom and 4 inches of vertical rise
Lightweight, single-piece aluminum construction for superior strength
Powder-coated exterior resists corrosion in all environments and applications
Includes stainless steel mounting hardware
Slotted mounting holes for position adjustment
5-year warranty
Brochure (pdf)
Raptor Jack Plate Adapter Bracket - Starboard - 5" Setback - 4" Rise - BlackMounts directly to your jack plate on the starboard side of your boat providing 5 inches of setback and 4 inches of vertical rise for Minn Kota Raptor Shallow Water Anchors Features:
Adds 5 inches of setback from the transom and 4 inches of vertical rise
Lightweight, single-piece aluminum construction for superior strength
Powder-coated exterior resists corrosion in all environments and applications
Includes stainless steel mounting hardware
Slotted mounting holes for position adjustment
5-year warranty
Brochure (pdf)
Raptor Jack Plate Adapter Bracket - Port - 5" Setback - 4" Rise - BlackMounts directly to your jack plate on the starboard side of your boat providing 5 inches of setback and 4 inches of vertical rise for Minn Kota Raptor Shallow Water Anchors Features:
Adds 5 inches of setback from the transom and 4 inches of vertical rise
Lightweight, single-piece aluminum construction for superior strength
Powder-coated exterior resists corrosion in all environments and applications
Includes stainless steel mounting hardware
Slotted mounting holes for position adjustment
5-year warranty
Brochure (pdf)
3" Raptor Setback Bracket - WhiteProvides 3” of additional setback to all mounting applications where specific clearances are required for Raptor Shallow Water Anchors.Features:
Light weight, single-piece aluminum construction for superior strength
Powder coated exterior resists corrosion in all environments and applications
Includes stainless steel mounting hardware
5-year warranty
Brochure (pdf)
3" Raptor Setback Bracket - BlackProvides 3” of additional setback to all mounting applications where specific clearances are required for Raptor Shallow Water Anchors.Features:
Light weight, single-piece aluminum construction for superior strength
Powder coated exterior resists corrosion in all environments and applications
Includes stainless steel mounting hardware
5-year warranty
Brochure (pdf)
Raptor Direct Mount Angle Bracket - WhiteMaximizes holding power in direct transom mounting applications by providing the optimal angle for Raptor deployment.Features:
Light weight, single-piece aluminum construction for superior strength
Powder coated exterior resists corrosion in all environments and applications
Includes stainless steel mounting hardware
Slotted mounting holes for position adjustment
5-year warranty
Brochure (pdf)
Raptor Direct Mount Angle Bracket - BlackMaximizes holding power in direct transom mounting applications by providing the optimal angle for Raptor deployment.Features:
Light weight, single-piece aluminum construction for superior strength
Powder coated exterior resists corrosion in all environments and applications
Includes stainless steel mounting hardware
Slotted mounting holes for position adjustment
5-year warranty
Brochure (pdf)
Raptor Jack Plate Adapter - Starboard - 2" Setback - 6" Rise - BlackMounts directly to your jack plate on the starboard side of your boat providing 6 inches of vertical rise for Minn Kota Raptor Shallow Water Anchors.Features:
Adds 6 inches of vertical rise
Light weight, single-piece aluminum construction for superior strength
Powder coated exterior resists corrosion in all environments and applications
Includes stainless steel mounting hardware
Slotted mounting holes for position adjustment
5-year warranty
Brochure (pdf)
Raptor Jack Plate Adapter Bracket - Starboard - 2" Setback - 4" Rise - BlackMounts directly to your jack plate on the starboard side of your boat providing 4 inches of vertical rise for Minn Kota Raptor Shallow Water Anchors.Features:
Adds 4 inches of vertical rise
Light weight, single-piece aluminum construction for superior strength
Powder coated exterior resists corrosion in all environments and applications
Includes stainless steel mounting hardware
Slotted mounting holes for position adjustment
5-year warranty
Brochure (pdf)
