LED All Around Light - 42" PoleAttwood's LED All-Round Light uses the very latest in bright white LED technology. 30% brighter than traditional LED lights with 60% lower mass which eliminates wobble. Improved lens technology provides a cleaner light transmission. LED technology keeps lights cool to the touch and is rated for 50,000+ hours of use. Provides 2-mile, 360° visibility for boats up to 39.4' (12M). Lights are completely sealed and watertight.
Two pin w/locking collar
42" pole length
3 watts at 12VDC
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Lens Color: White
Visible Range (Miles): 2nm
Housing: Black
Voltage - Input Range (Volts): 12v
LED: Yes
Box Dimensions: 1"H x 3"W x 48"L WT: 0.6 lbs
UPC: 022697553041
LED All Around Light - 36" PoleAttwood's LED All-Round Light uses the very latest in bright white LED technology. 30% brighter than traditional LED lights with 60% lower mass which eliminates wobble. Improved lens technology provides a cleaner light transmission. LED technology keeps lights cool to the touch and is rated for 50,000+ hours of use. Provides 2-mile, 360° visibility for boats up to 39.4' (12M). Lights are completely sealed and watertight.
Two pin w/locking collar
36" pole length
3 watts at 12VDC
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Lens Color: White
Visible Range (Miles): 2nm
Housing: Black
Voltage - Input Range (Volts): 12v
LED: Yes
Box Dimensions: 3"H x 3"W x 43"L WT: 0.6 lbs
UPC: 022697553034
Universal Fit Kayak Spray SkirtKeep water out of the kayak with this universal-fit spray skirt made with polyurethane-coated 210 denier nylon. Dual-side adjustability and PVC-sealed sealed seams. Features:
Universal fit
Color: Black
Keeps water out
Dual side adjustment for customized fit
Fits cockpits up to 40" long x 22" wide
Included:Mesh bag
Paddle ClipsAttwood's Paddle Clips keep your paddle secure to your boat for freeing up both hands or resting from paddling and fits 1" diameter shafts.Features:
Fits paddles 1" diameter
Color: Black
Set of 2
Comes with stainless steel mounting hardware
Kayak Hoist SystemAttwood's Kayak Lift Hoist is designed for the storage of kayaks, canoes, bikes, ladders and so much more. The pulley systems are constructed to allow one person can hoist any kayak, while the hook and locking mechanisms are able to safely hold up to 120 lbs. Features on this kayak storage hoist include an easy lifting pulley system and 2-inch wide webbing hand straps. All hardware needed for mounting this kayak hoist is included with your purchase. Place the Black Attwood Kayak Lift Hoist in your garage or storage shed, and you are set to keep your kayak up and off the ground all winter. Features:
Safety holds up to 120 lbs
Easy lifting pulley system
2" wide webbing straps
Color: Black
Includes:All mounting hardware
Turbo 4000 Series II In-Line BlowerPart #: 1749-4Attwood's improved Turbo 4000 Series II sets the standard for in-line blower performance. Utilizing advanced fan blade design techniques, Attwood has developed a blower system that matches air flow of existing in-line blowers at a significantly reduced noise level. The first vane axial-flow fan bilge blowers designed using aerospace technology to maximize performance. No other bilge blowers in the industry provide such powerful system output at such a low power input in a compact size.Patented in-line design - provides ventilation for engine compartments, galleys, bilges, and heads. Mounting feet allow vertical or horizontal installation in confined spaces. Install with #10 fasteners. Individual carton includes 2 tie straps. All are CE certified. 16-gauge tinned and caulked copper wire leads.Features:
Nickel-plated motor can for corrosion resistance
Stiffening ribs to reduce housing distortion
Motor cap to seal wires and motor for water resistance
Five-blade fan maximize airflow and efficiency
Tabs in intake and exhaust hold ventilation hose/clamp firmly in place
Low amp draw motor for longer blower and battery life
Built-in mounting feet allow easy vertical or horizontal install
3-Year Warranty
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Ducting: 4"
Open Flow (CFM): 200 CFM
Volts: 12v
Box Dimensions: 5"H x 5"W x 6"L WT: 1.1 lbs
UPC: 022697174949
Quick Guide (pdf)Brochure (pdf)
Turbo 3000 Series In-Line BlowerPart #: 1733-4The first vane axial-flow fan bilge blowers designed using aerospace technology to maximize performance. No other bilge blowers in the industry provide such powerful system output at such a low power input in a compact size.Patented in-line design - provides ventilation for engine compartments, galleys, bilges, and heads. Mounting feet allow vertical or horizontal installation in confined spaces. Install with #10 fasteners. Individual carton includes 2 tie straps. All are CE certified. 16-gauge tinned and caulked copper wire leads with optional MP1 molded rubber connectors. Improved 3" design.Features:
Nickel-plated motor can for corrosion resistance
Stiffening ribs to reduce housing distortion
Motor cap to seal wires and motor for water resistance
Five-blade fan maximize airflow and efficiency
Tabs in intake and exhaust hold ventilation hose/clamp firmly in place
Low amp draw motor for longer blower and battery life
Built-in mounting feet allow easy vertical or horizontal install
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Open Flow (CFM): 120 CFM
Volts: 12v
Box Dimensions: 4"H x 5"W x 6"L WT: 1 lbs
UPC: 022697173348
Quick Guide (pdf)Brochure (pdf)
3-Way Auto/Off/Manual Bilge Pump SwitchPart #: 7615A3Panel-mounted rocker switches for use with pump that draws 10 amps or less.Features:
1/4" spade terminals
6-volt through 32-volt D.C. only
10 amps maximum
Plate is 2-13/16" x 1-7/8"
Hole size is 1-1/2" x 7/8"
Caution: Bilge pump switches are not external ignition protected.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Volts: 12/24v
Type: Switches
Box Dimensions: 1"H x 3"W x 5"L WT: 0.1 lbs
UPC: 022697761590
Quick Guide (pdf)
WaterBuster® Portable PumpPart #: 4140-4This patented, submersible pump is a great way to remove unwanted water from boats, pool covers, aquariums and sump pits. Convenient and safe, too, because it needs no electrical cord - runs up to 5 hours on three alkaline D batteries. Excellent for use as a portable pump-out device for paddle boats, inflatables, duck boats, dingies and kayaks. Any craft that lacks a hard-wire, permenent electrical system.Features:
6-3/8" high x 5-1/4"
Pumps up to 200 gallons per hour
Includes 42" hose with garden-hose adapter for adding longer hose
Lifts water to height of 40
Note: Not to be used as a permanent bilge pump. Specifications:
Gallons Per Hour: 200 GPH
Type: Electric
Box Dimensions: 6"H x 6"W x 7"L WT: 2.2 lbs
UPC: 022697414045
Quick Guide (pdf)
Float Switch w/CoverPart #: 4201-7Converts bilge pumps to fully automatic operation. Maximum amp draw is 12 amps (at 12-volt D.C.) or 6-amps (at 24-Volts D.C.). Features a compact, low profile design that mounts on any surface from a horizontal up to a 24" angle. Incorporates a reliable and affordable mechanical switch that actuates pump motor at 2" water level. Wire leads do not flex or hinge with the float as on some competitive models. Integral cover dampens bilge sloshing to reduce pump cycling, and prevents debris interference. Sealed switch mechanism resists moisture, fume-ignition, and electrical shock. Contains no mercury, which is listed as a health hazard and "Persistent Toxic Substance" in over 26 states.Float switch installs independently or directly onto the rear slots of the V-Series pump bracket. Features a convenient test knob to test pump operation.Features:
36" Wire
12V and 24V
CE Rated
Includes Cover
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Volts: 12/24v
Type: Switches
Box Dimensions: 2"H x 6"W x 9"L WT: 0.5 lbs
UPC: 022697420176
Quick Guide (pdf)
Float SwitchPart #: 4202-7Converts bilge pumps to fully automatic operation. Maximum amp draw is 12 amps (at 12-volt D.C.) or 6-amps (at 24-Volts D.C.). Features a compact, low profile design that mounts on any surface from a horizontal up to a 24x angle. Incorporates a reliable and affordable mechanical switch that actuates pump motor at 2" water level. Wire leads do not flex or hinge with the float as on some competitive models. Integral cover dampens bilge sloshing to reduce pump cycling, and prevents debris interference. Sealed switch mechanism resists moisture, fume-ignition, and electrical shock. Contains no mercury, which is listed as a health hazard and "Persistent Toxic Substance" in over 26 states.Float switch installs directly onto the rear slots of the V-Series pump bracket. Features a convenient test knob to test pump operation.Features:
36" Wire
12V & 24V
CE Rated
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Volts: 12/24v
Type: Switches
Box Dimensions: 3"H x 6"W x 9"L WT: 0.4 lbs
UPC: 022697420275
Quick Guide (pdf)
Automatic Bilge Switch S3 SeriesPart #: 4801-7Incorporates a proprietary Electronic Sensing technology to detect bilge water levels and trigger pump activation and has been engineered to operate in any bilge water mixture consistently without failure. Your pump won't be exposed to continuous cycling as the S3 switch can easily distinguish splashing bilge water, chemicals, sludge build up or foam and comes equipped with fully sealed electronics that are completely protected from water or chemical damage. For added convenience, the bilge switch can be mounted on the floor of the bilge directly to a stringer wall or alongside the basket of the pump without added components or brackets. The S3 Series switch is also directly compatible with all competitive products and free of moving parts that can jam up, break or wear out over time.Features:
12V
15 Amp
36" Wire
5-Year Warranty
Specifications:
Volts: 12v
Type: Switches
Box Dimensions: 2"H x 3"W x 7"L WT: 0.4 lbs
UPC: 022697048011
Quick Guide (pdf)Brochure (pdf)
Heavy-Duty Bilge Pump 2000 SeriesPart #: 4760-4Heavy-Duty Blige Pumps integrate the highest quality bearings, brushes, alloys and magnets designed to withstand extreme usage cycles. Pump all employs an exclusive shaft and motor compartment, reducing wear and significantly extending pump life. Advanced resin compositions incorporated in exterior to resist chemicals such as engine oil, aggressive detergents and hose plasticizers. Attwood's Heavy Duty bilge has unsurpassed durability and efficiency in a compact design to ensure electrical energy is converted to the pump rather than excess heat.Attwood's highest capacity pump! Ball-bearing design provides for cooler motor operation and longer life, Delivers over 2000 GPH at open flow while drawing less than 7-amps.Features:
12V
CE Rated
36" Wire
3-Year Warranty
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Gallons Per Hour: 2000 GPH
Operation: Non-Automatic
Outlet Size: 1-1/8"
Volts: 12v
Type: Electric
Box Dimensions: 6"H x 7"W x 7"L WT: 2.4 lbs
UPC: 022697476043
Quick Guide (pdf)Brochure (pdf)
Heavy-Duty Bilge Pump 1700 SeriesPart #: 4730-4Heavy-Duty Bilge Pumps integrate the highest quality bearings, brushes, alloys and magnets designed to withstand extreme usage cycles. Pump all employs an exclusive shaft and motor compartment, reducing wear and significantly extending pump life. Advanced resin compositions incorporated in exterior to resist chemicals such as engine oil, aggressive detergents and hose plasticizers. Attwood's Heavy Duty bilge has unsurpassed durability and efficiency in a compact design to ensure electrical energy is converted to the pump rather than excess heat.The perfect upgrade from 1500 GPH rated pumps especially older and over-rated designs. Easily replaces 2000 GPH rated pumps. Delivers a true 1700 GPH at open flow while drawing less than 6-amps.Features:
12V
CE Rated
36" Wire
3-Year Warranty
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Gallons Per Hour: 1700 GPH
Operation: Non-Automatic
Outlet Size: 1-1/8"
Volts: 12v
Type: Electric
Box Dimensions: 6"H x 6"W x 7"L WT: 2.4 lbs
UPC: 022697437044
Quick Guide (pdf)Brochure (pdf)
Canoe Car-Top Carrier KitPart #: 11437-7A simple, convenient kit for carrying a canoe or small boat on car top. Includes four supporting foam blocks that snap on boat's gunwale and help prevent scratches on car top. Two straps with adjusting buckles and clips. Includes 20' of polypropylene rope and S-hooks to secure bow and stern to bumpers. Straps are sturdy poly web with vinyl-coated clips.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Kayak 15" Foot Braces - PairPart #: 11940-1Ligthtweight design fits both sit in and sit on top style kayaks. Trigger lock design allow for easy adjustment. Tracks use a universal mounting hole pattern that works in a variety of kayaks.Mounting hardware is not included.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Vertical, Flush Mount Transom LightPart #: 6356D7304 stainless steel with a plastic body and watertight lamp socket. The Round transom light body is translucent so it shines on both sides of a bulkhead! It can be used to light an interior compartment and may also be used as a cockpit courtesy light. Rubber gasket seals lens and body to mounting surface. Includes one 7.5-watt lamp and two stainless steel #10 screws.Light provides 2-mile, 135 degree transom visibility for pleasure craft up to 164 ft. (50 meters) in length.Features:
3" Diameter
Round
Specifications:
Lens Color: White
Visible Range (Miles): 2nm
Housing: Stainless
Voltage - Input Range (Volts): 12v
LED: Yes
Box Dimensions: 3"H x 5"W x 7"L WT: 0.3 lbs
UPC: 022697635631
Quick Guide (pdf)
LED 3-Mile Transom LightPart #: 6556-7For pleasure craft up to 164 ft. (50m) in length, Attwood offers one of the first 3NM LED transom navigational lights. Creating 135 degrees of light at 3NM of visibility, Attwood's proprietary optics design focuses the light aft, keeping the operator in a "shadow". A truly unique design, Attwood's transom light includes a luxurious electropolished stainless cover that is both durable and great looking. Attwood wraps it all together with an easy to install, "surface mount" design that utilizes a snap feature to eliminate exposed fasteners. 3 inch diameter.1.5 watts at 12 VDC, compatible with both Attwood and Perko mounting holes. Lights are rated for 50,000+ hours of use and feature a 10 year warranty.Features:
Stainless Steel
1.5W at 12VDC
135 degrees
3nm
10-Year Warranty
Specifications:
Lens Color: White
Visible Range (Miles): 3nm
Housing: Stainless
Voltage - Input Range (Volts): 12v
LED: Yes
Box Dimensions: 1"H x 5"W x 7"L WT: 0.3 lbs
UPC: 022697655677
Quick Guide (pdf)
Oval 2-Pin Base f/Angled Pole - BlackPart #: 91022-7These 2-pin bases for angled pole lights with locking collars are well-suited for rough conditions or long poles. Features a soft rubber cover with a molded-in gasket to protect the socket from moisture and debris when pole light is stowed away. Provides a 2-pin socket and a 7.5 degree angle and installs on narrow gunwales or deck areas. Completely non-corrosive, they feature contacts which are nickel-plated to resist corrosion and multi-crimped for durability, and wire leads tinned for corrosion resistance.Features:
Oval
2-Pin
Base specifically for angled pole
Black
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)
Stowaway Light w/2-Pin Plug-In Base - 12V - 36"Part #: 7100C7Swivel cover on base protects the base socket when light is stowed away. Base extends just 3" below deck. 4"-long x 1-5/8"-wide x 1-3/8"-dia. Provides 2-mile 360 degree illumination for boats up to 65.6' (20m). Includes 911339 base and 9-watt wedge base lamp. Three countersunk holes for #10 fasteners.Features:
36"
2-Pin Standard Pole
2-Mile
360 Degree
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Lens Color: White
Visible Range (Miles): 2nm
Housing: White
Voltage - Input Range (Volts): 12v
LED: No
Box Dimensions: 3"H x 5"W x 43"L WT: 1 lbs
UPC: 022697710062
Quick Guide (pdf)
Stowaway Light w/2-Pin Plug-In Base - 12V - 30"Part #: 7100B7Swivel cover on base protects the base socket when light is stowed away. Base extends just 3" below deck. 4"-long x 1-5/8"-wide x 1-3/8"-dia. Provides 2-mile 360 degree illumination for boats up to 65.6' (20m). Includes 911339 base and 9-watt wedge base lamp. Three countersunk holes for #10 fasteners.Features:
30"
2-Pin Standard Pole
2-Mile
360 Degree
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Lens Color: White
Visible Range (Miles): 2nm
Housing: White
Voltage - Input Range (Volts): 12v
LED: No
Box Dimensions: 3"H x 5"W x 36"L WT: 0.9 lbs
UPC: 022697710086
Quick Guide (pdf)
Stowaway Light w/2-Pin Plug-In Base -12V - 24"Part #: 7100A7Swivel cover on base protects the base socket when light is stowed away. Base extends just 3" below deck. 4"-long x 1-5/8"-wide x 1-3/8"-dia. Provides 2-mile 360 degree illumination for boats up to 65.6' (20m). Includes 911339 base and 9-watt wedge base lamp. Three countersunk holes for #10 fasteners.Features:
24"
2-Pin Standard Pole
2-Mile
360 Degree
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Lens Color: White
Visible Range (Miles): 2nm
Housing: White
Voltage - Input Range (Volts): 12v
LED: No
Box Dimensions: 3"H x 5"W x 27"L WT: 0.8 lbs
UPC: 022697710031
Quick Guide (pdf)
Frosted Globe All-Around Pole Light w/2-Pin Locking Collar Pole - 12V - 36"Part #: 5110-36-7Attwood has improved the world's most successful all-around lights. The Frosted Globe lights use a standardized lamp that is commonly available in marine, auto, and convenience stores. The lens has a clean, translucent look that provides a 2-mile 360 degree illimination for boats up to 65.6' (20m). Includes 9-watt wedge-base lamp.The locking collar poles offer "Universal Fit" because customers can use them with a wide variety of Attwood 2-pin straight or angled bases. This allows smaller inventory to cover more sales, because they even work as replacements in competitive bases, including Perko brand bases.Features:
12V
36"
2-Mile
360 Degree
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Lens Color: White
Visible Range (Miles): 2nm
Housing: White
Voltage - Input Range (Volts): 12v
LED: No
Box Dimensions: 2"H x 3"W x 42"L WT: 0.6 lbs
UPC: 022697110367
Quick Guide (pdf)
1-Mile Deck Mount, Green Sidelight - 12V - Stainless Steel HousingPart #: 66319G7Constructed of corrosion-resistant 304 stainless steel, these lights provide one-mile visibility for power boats up to 39.4 ft. (12 meters). Lights include rubber gasket lens seals for enhanced internal corrosion-resistance. Includes one 7.5 watt lamp. For connection to 12 VDC power supply. Installs with three #6 mounting fasteners (not included) . Each light provides 1-mile, 112.5 degree light visibility.Features:
7" Wire Lead
12V
Stainless Steel Housing
Green
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Lens Color: Green
Visible Range (Miles): 1nm
Housing: Stainless
Voltage - Input Range (Volts): 12v
LED: No
Box Dimensions: 3"H x 5"W x 5"L WT: 0.3 lbs
UPC: 022697008916
Quick Guide (pdf)
