Quick Flush™ Outboard Flush Fitting Kit for Mercury & Yamaha OutboardsProvides a quick and easy way to flush any outboard equipped with a flushing port. No more removing the plug and twisting the hoses to flush. Replace the plug with the Quick Flush™ and snap the hose on and off. Normal operating water pressure keeps the valve sealed when using the engine. Features:
Makes flushing outboard quick and easy
Unique previously patented slide valve replaces the outboard flushing port plug
The O-ring seal closes off the port when operating the engine
Quick connect on hose snaps onto valve for flushing
No plug to remove and no difficulty turning of hose into the port
Takes the hassle out of flushing your outboard
Fits all outboards equipped with a flushing port
Kit consists of slide valve, hose quick connector, and washer
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Type: Service Kits
Box Dimensions: 1"H x 4"W x 7"L WT: 0.1 lbs
UPC: 733572010626
Motor Stik OutBoard Motor Support Stick - PairFeatures:
Fits Over Trim Rams
Supports Your Outboard While Trailering
Takes the Pressure Off of Hydraulic System
Most Outboards 150hp and Up
Strong Aluminum Tubing with Molded Ends
Safe for Salt or Fresh Water
Note: Some Yamaha motors have a grease fitting on the port side ram. Use a single Motor Stik™ on the starboard side only in this application.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Type: Tools
Box Dimensions: 2"H x 5"W x 13"L WT: 1.15 lbs
UPC: 733572067750
Adjustable Heavy-Duty Transom Saver - 24"-36"Protect your investment with Attwood Transom Savers. A lifted outboard puts hundreds of foot-pounds of pressure on the transom - especially during trailering.Features:
Support the cantilevered weight of the motor
Stabilize engine and steering mechanism when trailering
The Attwood Difference:Tough components - You'll get long life from our adjustable toggles with replaceable rubber pads
Adjustable Transom Saver - Composite - Roller/BoltProtect your investment with Attwood Transom Savers. A lifted outboard puts hundreds of foot-pounds of pressure on the transom - especially during traileringProtect your boat and engine with Attwood Transom Savers:
Support the cantilevered weight of the motor
Stabilize engine and steering mechanism when trailering
The Attwood Difference: Tough components - You'll get long life from our adjustable toggles with replaceable rubber padsWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Rope LadderAttwood's 5-step, white boarding ladder. Sturdy 11-3/4" blow molded steps, textured step surface and steps connecting by a nylon rope with a top loop to secure to a cleat or a railing.Features:
Non-anodized aluminum tubing
Polyethylene steps
11" hooks and support legs
Folds flat for storage
Sturdy 11-3/4" blow molded steps
Textured step surface for sure footing
Steps connected by a nylon rope with top loop that quickly secures to cleat or railing
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Steer Stop Outboard Hydraulic Steering Lock Set - 4"T-H Marine developed the first steering stop available for outboard motors and now we've revised that design so it stands apart from imitation and performs better than any other on the market. With our 4" Steer Stop Outboard Hydraulic Steering Lock in place, boaters can center their outboard motor equipped with hydraulic steering and keep it from wandering when trailering. Similar to the original Steer Stop, units clip onto hydraulic steering rams on either side of outboard to keep engine straight and prevent damage to motor supports. The cord then keeps units together when stowed and aids removal.Additionally, with the new grip built into the design, it is easier than ever to install and remove the Steer Stop Outboard Hydraulic Steering Lock, saving you effort and wear and tear on your hands.Features:
Must-know information about the 4" Steer Stop Outboard Hydraulic Steering Lock:
Locks hydraulic steering when trailering
Fits most steering cylinder rods on outboard engines
Snaps over outboards hydraulic steering cylinder rods
Helps keep engine centered during transport
Protects steering system, outboard, and motor supports
Includes cord to connect units for storage and to aid in removal
Grip makes it even simpler and easier to put on and take off
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Type: Tools
Box Dimensions: 2"H x 5"W x 7"L WT: 0.45 lbs
UPC: 733572206708
Hot Foot™ Throttle Replacement Spring for All ModelsFeatures:
Replacement spring for all HOT FOOT™ Throttle models
Stainless steel
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Type: Parts
Box Dimensions: 2"H x 4"W x 7"L WT: 0.1 lbs
UPC: 733572001853
Hot Foot™ Adjustable Slide MountThis sliding mount allows easy adjustment of the Hot Foot™ throttle position for different drivers or driving conditions. Mount allows over 5" of adjustment for people of different heights.Features:
Easy Adjustment of Hot Foot™ position
Stainless Steel Fasteners & Release Pin
Allows 5” of Slide Adjustment
Great for multiple drivers of different heights
Allows change of throttle position for longer runs
All extruded aluminum and stainless steel construction
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Type: Parts
Box Dimensions: 3"H x 9"W x 12"L WT: 3.7 lbs
UPC: 733572011111
Letter & Number Kit - BlackFeatures:
3-inch, waterproof vinyl, pressure-sensitive labels
Resists fuel, fading, and scratches
Kit contains (Black Pieces): Four of each letter and number, plus twelve dashes totaling 148 pieces
*Meets USCG guidelines Quick Guide (pdf)
Fuel/Oil Mixing BottleAllows the addition of the exact amount of oil required for a 2-cycle engine. Oil level marks are in gallons and liters. Determines ratios for 100:1, 50:1, 24:1 and 10:1 mixes. Wide mouth, quart-size bottle.Features:
Markings to mix oil for 2 Cycle engine
Convenient wide-mouth, quart-size bottle
Clear oil level marks in black
Quick Guide (pdf)
Letter & Number Kit - WhiteFeatures:
3-inch, waterproof vinyl, pressure-sensitive labels
Resists fuel, fading, and scratches
Kit contains (White Pieces): Four of each letter and number, plus twelve dashes totaling 148 pieces
*Meets USCG guidelines Quick Guide (pdf)
Motor Well Boot for 4 (inch) Diameter OpeningThe motor well boot provides an organized, covered pass-thru for control cables, wires, or fuel lines. The split side allows for installation without disconnecting controls.Features:
Sold as a single pack that contains two Motor Well Boots
Includes ties for a secure fit
Black rubber, UV-resistant construction with polypropylene attachment gasket ring
*Designed for a 4-inch diameter opening
Steering Trim Control UnitTrim Switches on the Steering Wheel Improve Safety and Performance. This steering trim control unit is molded of black plastic with raised white letters to not only enhance boat appearance but also provide the ultimate in control of any high performance boat. The steering trim control unit mounts easily to steering wheel spokes to place engine trim control at your finger tips for maximum safety and ease of operation. The weather proof, rubber booted, push button switches combined with a black urethane coiled cord provide a unit which will provide trim control without removing hands from steering wheel.Features:
Puts trim switches on steering wheel for convenience and safety
Allows driver to keep both hands on the steering wheel
Mounts easily on steering wheel spokes
Weatherproof rubber booted switches
Rugged urethane coiled cord
Can be used for trim control or jack plate control
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Type: Switches
Box Dimensions: 2"H x 5"W x 7"L WT: 0.6 lbs
UPC: 733572001105
Quick Flush Kit for OMC OutboardsProvides a quick and easy way to flush any outboard equipped with a flushing port. No more removing the plug and twisting the hoses to flush. Replace the plug with the Quick Flush™ and snap the hose on and off. Normal operating water pressure keeps the valve sealed when using the engine. Features:
Makes flushing outboard quick and easy
Unique previously patented slide valve replaces the outboard flushing port plug
The O-ring seal closes off the port when operating the engine
Quick connect on hose snaps onto valve for flushing
No plug to remove and no difficulty turning of hose into the port
Takes the hassle out of flushing your outboard
Fits all outboards equipped with a flushing port
Kit consists of slide valve, hose quick connector, and washer
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Type: Service Kits
Box Dimensions: 2"H x 4"W x 7"L WT: 0.1 lbs
UPC: 733572010602
