Pinpoint GPSMotorGuide's proprietary Pinpoint GPS technology - available either integrated with select models or as an easy upgrade. Pinpoint uses an ultra-precise GPS receiver and precision control algorithms for incredibly accurate performance.A compact, easy-to-use remote controls these Pinpoint features:Anchor
Holds boat position on a fixed GPS coordinate
Stores and recalls up to eight positions
While in Anchor mode, the directional controls can be used to move the boat in 5-foot increments in any direction
Heading LockNavigates the boat to a specific compass headingRouteRecord and playback up to eight routes of up to four miles eachCruise ControlHold a GPS speed while navigating a heading or routeWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
G-Force Troll Cable Organizer - Black NeopreneWith the patented design of T-H Marine's Troll Jacket, you can protect and manage your trolling motor cables with ease!The G-Force Troll Jacket is a 2mm neoprene trolling motor wire and cable organizer. It measures 60” long and includes a velcro closure. While wrapped, the diameter is about 1.5”.For maximum compatibility for your setup, you can cut and trim the sides where your cables need to come out. This eliminates the need for zip ties along the factory cable cover. It also helps you bundle and organize adjacent wires, like those for your depth finder and HydroWave.Beyond organization, the Troll Jacket prevents exposure of factory cables. If your cables have electrical tape repair, the Troll Jacket gives an additional layer of defense against the elements.
G-Force ELIMINATOR Black Prop Nut for Garmin Force Trolling MotorOne of the latest products in the G-Force lineup is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter. Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for a longer battery and trolling motor life. Made to fit Garmin Force trolling motors. This specific part comes in a black color to provide a sleek, matching aesthetic. Factory nut and washer will have to be removed prior to installing Eliminator, also if you have an anode it will have to be removed as well to use the Eliminator.Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.Key ELIMINATOR Benefits:
Machined from 6061 Billet Aluminum
O-ring dampens noise/vibration and secures the nut
Wider contact area for a more stable prop
Cooling ports aid in heat dissipation
Anodized protected
No tools needed
Available in popular colors
Visually appealing
Designed and made in the U.S.A.
Patent pending
Troll-Tamer™ for Minn Kota Fortrex Trolling Motor Stabilizer Lock 3-1/2"-5" Spacing The Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-Tamer™ Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-Tamer™ Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditionsThe latest models, RMC-108-DP and RMC-109-DP feature a clamp on shaft bracket to work with the latest in digital, wireless bow mount trolling motors, including Minn Kota Terrova, Auto Pilot, Riptide models & Motor Guide Xi5.
Wireless Remote Key FOBWireless remote for use with Xi series motorsWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Pinpoint GPS Gateway KitThe MotorGuide Gateway Kit will take your fishing technology to the ultimate levelThe MotorGuide Gateway Kit will connect a Pinpoint GPS-equipped MotorGuide Xi5 trolling motor to a compatible Lowrance fishfinder/chartplotter through an existing NMEA 2000 network.Kit Includes:
1 - Pinpoint GPS-NMEA 2000 Gateway Cable (6'/1.8m)
1 - NMEA 2000 T-Connector
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Troll-Tamer™ for Minn Kota Fortrex/Ultrex Trolling Motor Stabilizer Lock 5"-8" SpacingThe Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-Tamer™ Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-Tamer™ Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditionsThe latest models, RMC-108-DP and RMC-109-DP feature a clamp on shaft bracket to work with the latest in digital, wireless bow mount trolling motors, including Minn Kota Terrova, Auto Pilot, Riptide models & Motor Guide Xi5.
Troll-Tamer™ for Minn Kota Terrova & MotorGuide Trolling Motor Stabilizer Lock 5"-8" SpacingThe Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-Tamer™ Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-Tamer™ Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditionsThe latest models, RMC-108-DP and RMC-109-DP feature a clamp on shaft bracket to work with the latest in digital, wireless bow mount trolling motors, including Minn Kota Terrova, Auto Pilot, Riptide models & Motor Guide Xi5.
Troll-Tamer™ for Minn Kota Fortrex Trolling Motor Stabilizer Lock 2-3/4"-4-1/2" Spacing The Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-Tamer™ Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-Tamer™ Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditionsThe latest models, RMC-108-DP and RMC-109-DP feature a clamp on shaft bracket to work with the latest in digital, wireless bow mount trolling motors, including Minn Kota Terrova, Auto Pilot, Riptide models & Motor Guide Xi5.
G-Force SILENCER Trolling Motor Vibration Pad - BlackThe G-Force SILENCER™ is a simple trolling motor modification that can help extend the life of your investment and improve function. Custom cut to fit both Motorguide and Minn Kota trolling motor mounts, the G-Force SILENCER™ creates a soft padded surface on your trolling motor mount that eliminates abrasive metal-on-metal contact. In addition to extending the life of trolling motor mounts, the G-Force SILENCER™ also quiets the harsh “clanking” noise associated with pulling your trolling motor out of the water. Protect your investment with the simple and quick addition of the T-H Marine G-Force SILENCER™.Features:
Extends life of trolling motor
Reduces noise and vibration
Eliminates metal-to-metal contact
Prevents harsh clanking when stowing trolling motor
Package will contain product for Motorguide and Minn Kota
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
G-Force SILENCER Trolling Motor Vibration Pad - RedThe G-Force SILENCER™ is a simple trolling motor modification that can help extend the life of your investment and improve function. Custom cut to fit both Motorguide and Minn Kota trolling motor mounts, the G-Force SILENCER™ creates a soft padded surface on your trolling motor mount that eliminates abrasive metal-on-metal contact. In addition to extending the life of trolling motor mounts, the G-Force SILENCER™ also quiets the harsh “clanking” noise associated with pulling your trolling motor out of the water. Protect your investment with the simple and quick addition of the T-H Marine G-Force SILENCER™.Features:
Extends life of trolling motor
Reduces noise and vibration
Eliminates metal-to-metal contact
Prevents harsh clanking when stowing trolling motor
Package will contain product for Motorguide and Minn Kota
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
G-Force ELIMINATOR Trolling Motor Clear/Silver Prop Nut for Minn Kota 35-70 Trolling MotorOne of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.Made to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic.Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.Key ELIMINATOR Benefits:
Machined from 6061 Billet Aluminum
O-ring dampens noise/vibration and secures nut
Wider contact area for a more stable prop
Cooling ports aid in heat dissipation
Anodized protected
No tools needed
Available in popular colors
Visually appealing
Designed and made in the U.S.A.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
TM Quick ConnectorsAttwood's Trolling Motor Quick Connectors is the safe and easy quick connect / disconnect system from your trolling motor to your battery. For use where a plug and socket cannot be used. Heavy duty 10-gauge connector.
Replaces battery clips
2-connector kit
Safe and easy
Semi-gloss finish
