Swivl-Eze Low Back Padded Flip Seat - GreyThis seat features a high-impact plastic frame and aluminum hinges. It is UV and mildew resistant with easy-to-clean vinyl and a standard seat hole mounting pattern. Specifications:
Dimensions (inch): 15" Wide x 16" depth x 16" height
Color: Grey
ABYC Code: B (not to be used at the helm/driver position)
Quick Guide (pdf)
Swivl-Eze Lock'N-Pin 3/4" Pin Seat Mount - Zinc CoatedSpecifications:
Zinc-plated
Tilt: 3 degrees
Pin (inch): 2-3/4" Steel Pin with Spring
ABYC Code: B (not to be used at the helm/driver position)
Installed Height (inch): 2"
#1 supplier of 3/4" pin seating hardware. Here's why:
The 3/4" system gives you outstanding economical performance
The design is proven by decades of experience
The Difference:
The patented Lock'N-Pin system leads the industry in safety
Lock'N-Pin prevents unintentional detachment for seat mounts, posts, and bases
Lock'N-Pin products exceed ABYC Standard H31.6.1
Not recommended to interchange with other manufacturers' products
Quick Guide (pdf)
G-Force ELIMINATOR Red Prop Nut for Lowrance Ghost Trolling MotorOne of the latest products in the G-Force lineup is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter. Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for a longer battery and trolling motor life. Made to fit Lowrance Ghost trolling motors. This specific part comes in red color to provide a sleek, matching aesthetic. Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut. Key Eliminator Benefits:
Machined from 6061 Billet Aluminum
O-ring dampens noise/vibration and secures the nut
Wider contact area for a more stable prop
Cooling ports aid in heat dissipation
Anodized protected
No tools needed
Available in popular colors
Visually appealing
Designed and made in the U.S.A.
Patent pending
G-Force ELIMINATOR Red Prop Nut for Garmin Force Trolling MotorOne of the latest products in the G-Force lineup is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter. Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for a longer battery and trolling motor life. Made to fit Garmin Force trolling motors. This specific part comes in red color to provide a sleek, matching aesthetic. Factory nut and washer will have to be removed prior to installing Eliminator, also if you have an anode it will have to be removed as well to use the Eliminator.Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.Key ELIMINATOR Benefits:
Machined from 6061 Billet Aluminum
O-ring dampens noise/vibration and secures the nut
Wider contact area for a more stable prop
Cooling ports aid in heat dissipation
Anodized protected
No tools needed
Available in popular colors
Visually appealing
Designed and made in the U.S.A.
Patent pending
G-Force ELIMINATOR Black Prop Nut for Lowrance Ghost Trolling MotorOne of the latest products in the G-Force lineup is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter. Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for a longer battery and trolling motor life. Made to fit Lowrance Ghost trolling motors. This specific part comes in a black color to provide a sleek, matching aesthetic. Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut. Key Eliminator Benefits:
Machined from 6061 Billet Aluminum
O-ring dampens noise/vibration and secures the nut
Wider contact area for a more stable prop
Cooling ports aid in heat dissipation
Anodized protected
No tools needed
Available in popular colors
Visually appealing
Designed and made in the U.S.A.
Patent pending
Letter & Number Kit - WhiteFeatures:
3-inch, waterproof vinyl, pressure-sensitive labels
Resists fuel, fading, and scratches
Kit contains (White Pieces): Four of each letter and number, plus twelve dashes totaling 148 pieces
*Meets USCG guidelines Quick Guide (pdf)
Letter & Number Kit - BlackFeatures:
3-inch, waterproof vinyl, pressure-sensitive labels
Resists fuel, fading, and scratches
Kit contains (Black Pieces): Four of each letter and number, plus twelve dashes totaling 148 pieces
*Meets USCG guidelines Quick Guide (pdf)
Fuel/Oil Mixing BottleAllows the addition of the exact amount of oil required for a 2-cycle engine. Oil level marks are in gallons and liters. Determines ratios for 100:1, 50:1, 24:1 and 10:1 mixes. Wide mouth, quart-size bottle.Features:
Markings to mix oil for 2 Cycle engine
Convenient wide-mouth, quart-size bottle
Clear oil level marks in black
Quick Guide (pdf)
Straight Fuel Vent - Black PolypropyleneA fuel vent, vents air from a fuel tank as it's being filled. This straight fuel vent is patented splash-resistant and corrosion-resistant polypropylene. Meets ABYC ventilation specifications.Features:
Straight Vent
Color: Black
Material: Polypropylene
Specifications:
Hose Size: (inch) 5/8" inner diameter
Maximum Hull Thickness: (inch) 7/8"
Installation Hole Size (inch) 3/4"
*Attwood fuel tank vents meet or exceed U.S. Coast Guard regulations Quick Guide (pdf)
Outboard Fuel Filter - UniversalDisposable high-flow in-line fuel filters work with most outboard motors. Protects carbureted engines by trapping pollutants. A clear body allows visual inspection.Features:
A clear body allows visual inspection, making it easier to stay on top of maintenance
High-strength, impact-resistant, and shatter-resistant construction is ideal for tough conditions
Universal In-Line Fuel Filter, for 1/4", 5/16", 3/8 inch fuel lines
*Best to replace during winterize or spring start-up for optimum results Quick Guide (pdf)
Fuel Tank Strap Set - 48 (inches) Long for 3-6 Gallon TanksThis Attwood Fuel Tank Strap Set contains everything needed to secure a 3-6-gallon fuel tank in place. This kit includes a 48-inch-long, 1-inch-wide white nylon web strap with a zinc-plated carbon steel snap and quick-release buckle. There are also 2 metal footman securing loops and the screws needed to install them. The strap can be run through the footman openings and then tightened and buckled to hold the tank in place.Features:
Includes 48-inch-long, 1-inch-wide white nylon web strap with a zinc-plated carbon steel snap and quick-release buckle
Run the strap through footman loops, then tighten and buckle to hold the tank in place
Quick Guide (pdf)
Portable Fuel Tank Cap with Tether - EPA CertifiedHigh-flow valve exceeds OEM engine fuel flow requirements. Be sure your fuel system is safe; the ratchet feature ensures a proper seal while the tether prevents cap loss. Very versatile; designed for 0 to 350 horsepower engines.Features:
Standard 2 ¼ inch neck for convenience
Includes high-flow automatic vacuum valve
Tether Included
Compatible with 8803LP/8806LP/8812LP/8812LLP Tanks
Easy-to-grip cap features ratcheting noise so you know it’s properly sealed
Quick Guide (pdf)
Fuel Tank Strap Set - 72 (inches) Long for 12 Gallon TanksThis Attwood Fuel Tank Strap Set contains everything needed to secure a 12-gallon fuel tank in place. This kit includes a 72-inch-long, 1-inch-wide white nylon web strap with a zinc-plated carbon steel snap and quick-release buckle. There are also 2 metal footman securing loops and the screws needed to install them. The strap can be run through the footman openings and then tightened and buckled to hold the tank in place.Features:
Includes 72-inch-long, 1-inch-wide white nylon web strap with a zinc-plated carbon steel snap and quick-release buckle
Run the strap through footman loops, then tighten and buckle to hold the tank in place
Quick Guide (pdf)
Deck Fill for Pressure Relief Systems - Angled Body & Scalloped Stainless Steel CapPressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum valves allow fresh air to enter the fuel tank to replace the fuel being consumed by the engine. Other components of a pressure relief system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. All Attwood pressure relief systems are designed to ensure water does not enter the fuel tank and are compatible with Jerry Can and marine nozzle refueling.Features:
Fits 1-1/2 (inch) fill hose and 5/8 (inch) vent hose
Triple high-flow vacuum valves ensure maximum make-up airflow (compatible with high HP applications)
Dual 1 psi diurnal emission control and overpressure relief safety valves built into the cap
Automatic nozzle shutoff 4-18 gpm
Stainless Steel finish
An essential component of VaporTec and SecureStop
Designed and tested to prevent water from entering the fuel system
EPA / CARB Certified
Hinged audible click cap meets EPA requirements
Meets CARB 13 CCR 2235 and ISO 13331 nozzle mating and retention standards
*Compatible with Ethanol blended fuels Quick Guide (pdf)
Motor Well Boot for 4 (inch) Diameter OpeningThe motor well boot provides an organized, covered pass-thru for control cables, wires, or fuel lines. The split side allows for installation without disconnecting controls.Features:
Sold as a single pack that contains two Motor Well Boots
Includes ties for a secure fit
Black rubber, UV-resistant construction with polypropylene attachment gasket ring
*Designed for a 4-inch diameter opening
Fuel/Water SeparatorKeep your engine running at peak efficiency by filtering out any water that may get into the fuel system. 10-micron filtering capability.Features:
Double seal for enhanced performance
Replacement for: Mercury 35-60494-1, Aqua Power 6031, GLM 24940, Sierra 18-78250, SMI 15494, Valmar 52113, Marpac 7-0872
Quick Guide (pdf)
Outboard Fuel Filter for 3/8 inch LinesProtect your carbureted engine by trapping pollutants before they even reach the engine itself. High-flow, in-line fuel filters will work with most outboard motors.Features:
Use with 3/8 inch fuel lines
Works with most outboard motors
A clear body allows visual inspection, making it easier to stay on top of maintenance
High-strength, impact-resistant, and shatter-resistant construction is ideal for tough conditions
Disposable for ultimate convenience
*Best to replace during winterize or spring start-up for optimum results Quick Guide (pdf)
Deck Fill for Pressure Relief Systems - Straight Body & Scalloped Stainless Steel CapPressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum valves allow fresh air to enter the fuel tank to replace the fuel being consumed by the engine. Other components of a pressure relief system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. All Attwood pressure relief systems are designed to ensure water does not enter the fuel tank and are compatible with Jerry Can and marine nozzle refueling.Features:
Fits 1-1/2 (inch) fill hose and 5/8 (inch) vent hose
Triple high-flow vacuum valves ensure maximum make-up airflow (compatible with high HP applications)
Automatic nozzle shutoff 4-18 gpm
Stainless Steel finish
An essential component of VaporTec and SecureStop
Designed and tested to prevent water from entering the fuel system
EPA / CARB Certified
Hinged audible click cap meets EPA requirements
Meets CARB 13 CCR 2235 and ISO 13331 nozzle mating and retention standards
*Compatible with Ethanol blended fuels Quick Guide (pdf)
Compact Carbon CanisterCarbon canister systems utilize an engineered charcoal canister to reduce hydrocarbons entering the atmosphere. Other components of a carbon canister system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. All Attwood carbon canister systems are designed to ensure liquid fuel or water does not reach the canister and are compatible with Jerry Can and marine nozzle refueling.Features:
This is a single pack that contains two Compact Carbon Canisters
Brackets OEM Installed
Low permeation shell reduces overall system emissions
Can be mounted in any orientation using brackets provided
EPA / CARB Certified
Fits a 5/8" vent hose
Specifications:
Trailerable Vessel Capacity (EPA Rating): 70 Gallon
Non-Trailerable Vessel Capacity (EPA Rating): 110 Gallon
Trailerable Vessel Capacity (CARB Rating): 56 Gallon
Non-Trailerable Vessel Capacity (CARB Rating): 110 Gallon
*Compatible with Ethanol blended fuels Quick Guide (pdf)
Standard Carbon CanisterCarbon canister systems utilize an engineered charcoal canister to reduce hydrocarbons entering the atmosphere. Other components of a carbon canister system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. All Attwood carbon canister systems are designed to ensure liquid fuel or water does not reach the canister and are compatible with Jerry Can and marine nozzle refueling.Features:
Brackets OEM Installed
Low permeation shell reduces overall system emissions
Can be mounted in any orientation using brackets provided
EPA / CARB Certified
Fits a 5/8" vent hose
Specifications:
Trailerable Vessel Capacity (EPA Rating): 220 Gallon
Non-Trailerable Vessel Capacity (EPA Rating): 350 Gallon
Trailerable Vessel Capacity (CARB Rating): 176 Gallon
Non-Trailerable Vessel Capacity (CARB Rating): 350 Gallon
*Compatible with Ethanol blended fuels Quick Guide (pdf)
Deck Fill for Pressure Relief Systems - Angled Body & Scalloped Black Plastic CapPressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum valves allow fresh air to enter the fuel tank to replace the fuel being consumed by the engine. Other components of a pressure relief system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. All Attwood pressure relief systems are designed to ensure water does not enter the fuel tank and are compatible with Jerry Can and marine nozzle refueling.Features:
Fits 1-1/2 (inch) fill hose and 5/8 (inch) vent hose
Triple high-flow vacuum valves ensure maximum make-up airflow (compatible with high HP applications)
Dual 1 psi diurnal emission control and overpressure relief safety valves built into the cap
Automatic nozzle shutoff 4-18 gpm
Black Composite finish
An essential component of VaporTec and SecureStop
Designed and tested to prevent water from entering the fuel system
EPA / CARB Certified
Hinged audible click cap meets EPA requirements
Meets CARB 13 CCR 2235 and ISO 13331 nozzle mating and retention standards
*Compatible with Ethanol blended fuels Quick Guide (pdf)
90° P-Trap Fuel Tank Vent - Flush Mount - Black with Stainless Steel Vent HeadThis Attwood 90-Degree P-Trap Fuel Tank Vent reliably helps prevent water from entering the fuel tank while still allowing air to vent freely during normal sea conditions and washdowns. This vent’s effectiveness. eliminates the need for an anti-siphon loop in the vent hose. This is a flush mount vent for use with a 5/8-inch interior diameter hose. It requires a 1-3/8-inch installation hole and can be used with a maximum hull thickness of 1 inch.Features:
This black vent with a stainless steel vent head meets ABYC standards
Flush Mount - 5/8" I.D. hose
(inch) 1-3/8" install. hole size
(inch) 1" Max. hull thickness
*Compatible with Ethanol blended fuels Quick Guide (pdf)
