Primer Bulb - 3/8" Inner Diameter HoseThis Atwood Primer Bulb is engineered and constructed to deliver the most reliable priming and long-term leak-free performance. The exclusive three-layer construction prevents collapse under vacuum and prevents ballooning or bursting under pressure. The low-permeation material prevents fuel evaporation, and this bulb delivers 60 percent more output per pump than leading competitors.Features:
It is intended for use with a 3/8-inch interior diameter hose
Exclusive high-efficiency check-valves deliver faster priming and low fuel restriction (less than 1kPa restriction at 50 liters/hour)
Engineered hose barbs and stainless steel stepless clamps ensure leak-free performance
This bulb is compatible with Ethanol blended fuels, and it is EPA and CARB certified
Specifications:
ID Diameter (inches): 3/8"
Box Dimensions: 3"H x 5"W x 7"L WT: 1.3 lbs
UPC: 022697930385
Quick Guide (pdf)
Mercury Fuel Line Kit - 3/8" Dia. x 6' Length with Fuel Demand ValveThis EPA-certified Attwood Mercury Fuel Line Kit reliably delivers fuel to your Mercury engine and provides the ultimate in performance, safety, and value. The kit comes with a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C.Features:
These Attwood Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and engine end hose fitting 8896LP6
It also includes a multi-layer low-permeation primer bulb and a Fuel Demand Value that eliminates engine flooding and spillage by preventing pressurized fuel from reaching the engine.
Hose and tank fittings come with pre-applied thread sealant
For Mercury engines and tanks
Tank Side: Universal Sprayless Quick-Connect
*This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines Specifications:
ID Diameter (inches): 3/8"
Length (Feet): 6'
Box Dimensions: 3"H x 9"W x 13"L WT: 1.3 lbs
UPC: 022697938244
Quick Guide (pdf)
Johnson/Evinrude Fuel Line Kit - 3/8" Diameter x 6' Length with Fuel Demand ValveThis EPA-certified Attwood Johnson/Evinrude Fuel Line Kit reliably delivers fuel to your Johnson or Evinrude engine and provides the ultimate in performance, safety, and value. The kit comes with a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C. Also, the kit includes a multi-layer low-permeation primer bulb and a Fuel Demand Value that eliminates engine flooding and spillage by preventing pressurized fuel from reaching the engine.Features:
These Attwood Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and engine end hose fitting 8889LP6
In-Line Fuel Demand Valve
Hose and tank fittings come with pre-applied thread sealant
Reliably delivers fuel to your Johnson or Evinrude engine
*This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines Specifications:
ID Diameter (inches): 3/8"
Length (Feet): 6'
Box Dimensions: 2"H x 9"W x 13"L WT: 1.35 lbs
UPC: 022697938053
Quick Guide (pdf)
Universal Sprayless Connector - Male & FemaleSafely eliminate dangerous spraying of fuel when connecting or disconnecting pressurized hoses during fueling or maintenance. Comes complete with a thread-sealer for fast, easy installation; no additional supplies are required.Features:
8838HF6 Female Hose Fitting and 8838TM6 Male Threaded Tank Fitting
Pre-applied fuel-grade thread sealant prevents fuel leaks
Include check valves that automatically close upon disconnecting
High fuel flow fitting (less than .25kPa restriction at 50 liters/hour)
Compatible with Ethanol blended fuels
High-strength body engineered to withstand tough marine environments
Pre-applied fuel-grade thread sealant prevents leaks and saves you time
Compatible with 3/8 inch fuel lines, Ethanol blended fuels, and all original equipment manufacturer (OEM) brand engines
Can be used with portable generators and other portable fuel tanks
*Meets all EPA and CARB (California Air Resources Board) requirements
In-Line Fuel Overflow ProtectorThe fuel vent line surge protector helps avoid refueling spills because the surge-free line causes automatic fuel nozzles to shut off as the tank fills.With non-automatic nozzles, the surge protector causes a gurgling sound to indicate that the tank is full.Incorporates a ball-style check valve with internal baffling.Features:
Meets ABYC Standard H-24
Install in-line with traditional tank vent systems that use standard 5/8" ID vent hose
Compact size and operates in any orientation within 45° of vertical
Withstands oil, gas, alcohol-blended fuels
Includes 2 hose clamps for installation in the vent hose
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Outboard Fuel Filter for 3/8 inch LinesProtect your carbureted engine by trapping pollutants before they even reach the engine itself. High-flow, in-line fuel filters will work with most outboard motors.Features:
Use with 3/8 inch fuel lines
Works with most outboard motors
A clear body allows visual inspection, making it easier to stay on top of maintenance
High-strength, impact-resistant, and shatter-resistant construction is ideal for tough conditions
Disposable for ultimate convenience
*Best to replace during winterize or spring start-up for optimum results Quick Guide (pdf)
Honda 3/8" Barb Female Hose Fitting - Engine EndThis Attwood Engine-End Hose Fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels. The barb fitting fits 3/8" I.D. (Inner Diameter) hose. Clamps are not included and use thread sealant on all threads.Features:
Honda fitting
Engine-End fitting
Material Construction: Acetal
Rectangle locking post
Quick Guide (pdf)
Yamaha Fuel Line Kit 6' x 3/8"Attwood's low-permeation fuel line kits set the standard in performance, safety, and value. Along with featuring Attwood's award-winning Universal Sprayless Connector, these kits meet strict United States EPA regulations. Attwood Corporation has been an award-winning leader in engineering, testing, and manufacturing the highest quality marine products for over 100 years. We deliver safe and reliable lighting, fuel systems, water systems, seating & pedestals, swim ladders, custom upholstery, and general marine accessories that are easy to install and meet regulatory compliance.Features:
Includes Attwood's award-winning Universal Sprayless Connector; no more dangerous fuel sprays when connecting and disconnecting pressurized lines
Multi-layer low-permeation primer bulb with 60% more fuel output compared to competitors
Includes 3/8-inch low-permeation fuel hose that resists kinking and hardening; rated up to 100 degrees Centigrade
Versatile: compatible with Ethanol blended fuels, Yamaha Brand engines and tanks
Attwood products are both compatible and reliable, engineered and built with a never-fail attitude
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
ID Diameter (inches): 3/8"
Length (Feet): 6'
Box Dimensions: 3"H x 9"W x 14"L WT: 1.25 lbs
UPC: 022697938640
Mercury/Yamaha Female Hose Engine Fitting - 3/8" BarbConnect your tank and fuel lines with confidence; the solid machined-brass construction holds up to leaded, unleaded, and alcohol-based fuels for.Features:
Solid machined brass for dependable performance, peace of mind
Hose female
Tank or Engine End
Replaces Yamaha 6Y1-24305-03
*Specifically mates to Attwood part number: 8897-6 Quick Guide (pdf)
Universal Brass Fuel Hose Fitting - 1/4" NPT x 5/16" Barb This Attwood Fuel Tank Fitting is a dependable replacement for original equipment and provides a sure connection in a fuel line.Features:
Fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels
Material Construction: Brass
Male thread, hose barb
(inch) Male 1/4" NPT x 5/16" Barb
*Use thread sealant on all threads Quick Guide (pdf)
Honda Tank Fitting - 1/4" NPT Thread - 90HP+This Attwood hose fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels. This threaded fitting has a 1/4" male NPT thread. Also, use thread sealant on all threads, and clamps are not included.Features:
Honda male fitting
Designed for 90HP+ (Large Bore)
Material Construction: Chrome-plated Brass
*Specifically mates to Attwood part number: 8902-6 Quick Guide (pdf)
Johnson/Evinrude/OMC (Outboard Marine Corporation) Male Tank Fitting - 1/4" NPTThis Attwood male tank fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels. The threaded fitting has a 1/4" male NPT thread and uses thread sealant on all threads. Clamps are not included.Features:
Johnson, Evinrude, and OMC fitting
Quick-connect ¼-inch male thread makes installation easy
Solid machined brass for dependable performance, peace of mind
*Specifically mates to Attwood part numbers: 8889LP6 & 88FHE516-6 Quick Guide (pdf)
Johnson/Evinrude/OMC (Outboard Marine Corporation) Female Hose Fitting - Tank Or Engine End - 5/16" BarbFor use on both ends of the fuel line to connect tank fitting and motor. The hose barb fits a 5/16" inner diameter hose.Features:
Johnson, Evinrude, and OMC fitting
Tank or Engine End
Material Construction: Acetal
*Specifically mates to Attwood part number: 8883-6 Quick Guide (pdf)
Outboard Fuel Filter - UniversalDisposable high-flow in-line fuel filters work with most outboard motors. Protects carbureted engines by trapping pollutants. A clear body allows visual inspection.Features:
A clear body allows visual inspection, making it easier to stay on top of maintenance
High-strength, impact-resistant, and shatter-resistant construction is ideal for tough conditions
Universal In-Line Fuel Filter, for 1/4", 5/16", 3/8 inch fuel lines
*Best to replace during winterize or spring start-up for optimum results Quick Guide (pdf)
Universal Fuel Line Kit - 5/16" Diameter x 6' LengthThis EPA-certified Attwood Universal Fuel Line Kit reliably delivers fuel to your engine and provides the ultimate in performance, safety, and value. The kit includes a 6-foot-long, 5/16-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C. There’s also a multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance.Features:
This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines.
Universal for any engines and tanks
Multi-Layer, Low-Permeation Primer Bulb
6 ft. x 5/16 in. Low Permeation Hose
Reliably delivers fuel to your engine
*No end fittings included Specifications:
ID Diameter (inches): 5/16"
Length (Feet): 6'
Box Dimensions: 3"H x 8"W x 12"L WT: 1.1 lbs
UPC: 022697951601
Quick Guide (pdf)
Johnson/Evinrude/OMC (Outboard Marine Corporation) Female Hose Fitting - Tank Or Engine End - 3/8" BarbFor use on both ends of the fuel line to connect tank fitting and motor. The hose barb fits a 5/16" inner diameter hose.Features:
Johnson, Evinrude, and OMC fitting
Tank or Engine End
Material Construction: Acetal
*Specifically mates to Attwood part number: 8883-6 Quick Guide (pdf)
Johnson/Evinrude Fuel Line Kit - 3/8" Diameter x 6' Length (No Tank Fitting)This Attwood Fuel Line Kit is a reliable replacement for the original equipment on Johnson and Evinrude engines and tanks. This kit includes a 6-foot-long, 3/8-In. diameter fuel line and a multi-layer, low-permeation primer bulb.Features:
These Attwood Hose Fittings Are Included: Two (2) 8889LP6 hose fittings for the tank end and for the engine end
For Johnson/Evinrude engines and tanks
*No Fuel Demand Valve or Tank Fitting is included in this kit Specifications:
ID Diameter (inches): 3/8"
Length (Feet): 6'
Box Dimensions: 3"H x 9"W x 12"L WT: 1.2 lbs
UPC: 022697938169
Quick Guide (pdf)
Universal Fuel Line Kit - 3/8" Diameter x 6' Length with Sprayless Connectors & Fuel Demand ValveThis EPA-certified Attwood Universal Fuel Line Kit reliably delivers fuel to your engine and provides the ultimate in performance, safety, and value. The kit includes a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C. Award-winning Universal Sprayless Connector (hose and tank fittings with pre-applied thread sealant) are included as well. Features:
These Attwood Fittings Are Included: Tank fitting 8838TM6 & tank end hose fitting 8838HF6
Also, includes a Fuel Demand Value that eliminates engine flooding and spillage by preventing pressurized fuel from reaching the engineTank Side: Universal Sprayless Quick-Connect
Universal for any Engines and Tanks
This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines
There’s also a multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance
*It does not include an engine fitting Specifications:
ID Diameter (inches): 3/8"
Length (Feet): 6'
Box Dimensions: 3"H x 9"W x 13"L WT: 1.3 lbs
UPC: 022697938275
Quick Guide (pdf)
Universal Aluminum Fuel Hose Fitting - 3/8" NPT x 3/8" BarbThis Attwood Fuel Tank Fitting is a dependable replacement for original equipment and provides a sure connection in a fuel line.Features:Fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuelsSpecifications:
Material Construction: Aluminum
Male thread, hose barb
(inch) Male 3/8" NPT x 3/8" Barb
*Use thread sealant on all threads Quick Guide (pdf)
3/8" Hose Mender In-Line Fuel Splice Kit with Stainless Steel ClampsWhether it’s an emergency situation on the water or routine maintenance at the dock, this in-line fuel splice kit provides everything you need to repair 3/8-inch lines. Machined brass fitting paired with 2 stainless steel hose clamps. Features:
Everything you need to mend a 3/8-inch fuel line including 2 stainless steel hose clamps
Solid machined brass with barbed ends
A centered divider ensures you get the mender evenly and securely placed between both ends of the hose
Very Versatile: Use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels
Quick Guide (pdf)
Universal Brass Fuel Hose Fitting - 1/4" NPT x 3/8" Barb This Attwood Fuel Tank Fitting is a dependable replacement for original equipment and provides a sure connection in a fuel line.Features:
Fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels
Material Construction: Brass
Male thread, hose barb
(inch) Male 1/4" NPT x 3/8" Barb
*Use thread sealant on all threads Quick Guide (pdf)
Chrysler Female Hose Fitting - 3/8" BarbThis Attwood Chrysler Engine Fuel Hose Fitting provides for the precise and effective installation of a fuel line to a Chrysler-brand engine. This Fuel Hose Fitting is a female fitting that connects to the engine end of the fuel line. The fitting has a 3/8-inch barb.Features:
Provides precise installation of a fuel line to a Chrysler-brand engine
Connects on the engine end of the fuel line
Material Construction: Chrome-plated Brass
*Specifically mates to Attwood part number: 14509-6 Quick Guide (pdf)
Yamaha Tank Fitting - 1/4" NPT ThreadConnect your tank and fuel lines with confidence. Solid machined brass construction holds up to lead, unleaded, and alcohol-based fuels. Designed for Yamaha Brand engines and tanks and fits select Mercury/Mariner Brand engines.Features:
Quick-connect 1/4-inch male thread makes installation easy
Solid machined brass for dependable performance and peace of mind
Designed for Yamaha and select Mercury/Mariner brand engines that use leaded, unleaded, and alcohol-blended fuel
*Specifically mates to Attwood part numbers: 8896LP6 & 88FHY516-6 Quick Guide (pdf)
Yamaha Female Hose Fitting - Tank Or Engine End - 5/16" BarbThis Attwood hose fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels. Barbed fitting fits 5/16" I.D. (Inner Diameter) hose and clamps are not included. Also, use thread sealant on all threads.Features:
Yamaha fitting
Tank or Engine End
Material Construction: Acetal
*Specifically mates to Attwood part number: 8897-6 Quick Guide (pdf)
