Portable Fuel Tank - 6 Gallon without GaugeAttwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Rugged materials and innovative design stand up to harsh marine conditions. 6-gallon tank adapts to virtually any outboard engine. Features:
6 Gallon fuel capacity
Compatible with 1/4" NPT fuel fittings
Additional oil and ullage/vapor capacity
EPA Cap with automatic, high-flow vacuum valve
Cap with built-in vacuum valve means no need for manual venting
Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems
Meets EPA and CARB (California Air Resources Board) regulations
Complies with all ABYC/NMMA requirements for portable marine fuel tanks
Dimensions:
Length: (inch) 19.82"
Width: (inch) 13.50"
Height: (inch) 9.16"
*No gauge or fuel line includedWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)
Fuel Tank Strap Set - 48 (inches) Long for 3-6 Gallon TanksThis Attwood Fuel Tank Strap Set contains everything needed to secure a 3-6-gallon fuel tank in place. This kit includes a 48-inch-long, 1-inch-wide white nylon web strap with a zinc-plated carbon steel snap and quick-release buckle. There are also 2 metal footman securing loops and the screws needed to install them. The strap can be run through the footman openings and then tightened and buckled to hold the tank in place.Features:
Includes 48-inch-long, 1-inch-wide white nylon web strap with a zinc-plated carbon steel snap and quick-release buckle
Run the strap through footman loops, then tighten and buckle to hold the tank in place
Quick Guide (pdf)
Portable Fuel Tank Cap with Tether - EPA CertifiedHigh-flow valve exceeds OEM engine fuel flow requirements. Be sure your fuel system is safe; the ratchet feature ensures a proper seal while the tether prevents cap loss. Very versatile; designed for 0 to 350 horsepower engines.Features:
Standard 2 ¼ inch neck for convenience
Includes high-flow automatic vacuum valve
Tether Included
Compatible with 8803LP/8806LP/8812LP/8812LLP Tanks
Easy-to-grip cap features ratcheting noise so you know it’s properly sealed
Quick Guide (pdf)
Portable Fuel Tank - 12 Gallon with GaugeAttwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Tough materials and innovative design stand up to harsh marine conditions. A 12-gallon tank is ideal for pontoon boats where more fuel capacity is needed. Includes gauge.Features:
12 Gallon fuel capacity
Compatible with 1/4-inch NPT fuel fittingsHigh-Contrast, easy to read gage
Additional oil and ullage/vapor capacity
EPA Cap with automatic, high-flow vacuum valve
UV-grade multi-layer tank material
Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems
Cap with built-in vacuum valve means no need for manual venting
Meets EPA and CARB (California Air Resources Board) regulations
Complies with all ABYC/NMMA requirements for portable marine fuel tanks
Dimensions:
Length: (inch) 22.75"
Width: (inch) 14.25"
Height: (inch) 14.47"
*No fuel line included Quick Guide (pdf)
Portable Fuel Tank - 3 Gallon without GaugeAttwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Tough materials and innovative design stand up to harsh marine conditions. A 3-gallon tank is perfect for small outboards.Features:
3 Gallon fuel capacity
Compatible with 1/4-inch NPT fuel fittings
Additional oil and ullage/vapor capacity
EPA Cap with automatic, high-flow vacuum valve
UV-grade multi-layer tank material
Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems
Cap with built-in vacuum valve means no need for manual venting
Meets EPA and CARB (California Air Resources Board) regulations
Complies with all ABYC/NMMA requirements for portable marine fuel tanks
Dimensions:
Length: (inch) 16.6"
Width: (inch) 11.45"
Height: (inch) 7.3"
*No gauge or fuel line included Quick Guide (pdf)
Portable Low Profile Fuel Tank - 12 Gallon with GaugeAttwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Tough materials and innovative design stand up to harsh marine conditions. A 12-gallon tank is ideal for pontoon boats where more fuel capacity is needed. Includes gauge and low profile save space.Features:
12 Gallon fuel capacity
Compatible with 1/4-inch NPT fuel fittings
High-Contrast, easy to read gage
Save space; the low profile is 3 inches lower than regular 12-gallon tanks
Additional oil and ullage/vapor capacity
EPA Cap with automatic, high-flow vacuum valve
UV-grade multi-layer tank material
Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems
Cap with built-in vacuum valve means no need for manual venting
Meets EPA and CARB (California Air Resources Board) regulations
Complies with all ABYC/NMMA requirements for portable marine fuel tanks
Dimensions:
Length: (inch) 24"
Width: (inch) 18"
Height: (inch) 11.61"
*No fuel line included Quick Guide (pdf)
Portable Fuel Tank - 3 Gallon with GaugeAttwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Tough materials and innovative design stand up to harsh marine conditions. A 3-gallon tank is perfect for small outboards. Includes gauge.Features:
3 Gallon fuel capacity
Compatible with 1/4-inch NPT fuel fittingsHigh-Contrast, easy to read gage
Additional oil and ullage/vapor capacity
EPA Cap with automatic, high-flow vacuum valve
UV-grade multi-layer tank material
Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems
Cap with built-in vacuum valve means no need for manual venting
Meets EPA and CARB (California Air Resources Board) regulations
Complies with all ABYC/NMMA requirements for portable marine fuel tanks
Dimensions:
Length: (inch) 16.6"
Width: (inch) 11.45"
Height: (inch) 7.3"
*No fuel line included Quick Guide (pdf)
Portable Fuel Tank - 12 Gallon without GaugeAttwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Tough materials and innovative design stand up to harsh marine conditions. A 12-gallon tank is ideal for pontoon boats where more fuel capacity is needed.Features:
12 Gallon fuel capacity
Compatible with 1/4-inch NPT fuel fittings
Additional oil and ullage/vapor capacity
EPA Cap with automatic, high-flow vacuum valve
UV-grade multi-layer tank material
Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems
Cap with built-in vacuum valve means no need for manual venting
Meets EPA and CARB (California Air Resources Board) regulations
Complies with all ABYC/NMMA requirements for portable marine fuel tanks
Dimensions:
Length: (inch) 22.75"
Width: (inch) 14.25"
Height: (inch) 14.47"
*No gauge or fuel line included Quick Guide (pdf)
Fuel Tank Strap Set - 72 (inches) Long for 12 Gallon TanksThis Attwood Fuel Tank Strap Set contains everything needed to secure a 12-gallon fuel tank in place. This kit includes a 72-inch-long, 1-inch-wide white nylon web strap with a zinc-plated carbon steel snap and quick-release buckle. There are also 2 metal footman securing loops and the screws needed to install them. The strap can be run through the footman openings and then tightened and buckled to hold the tank in place.Features:
Includes 72-inch-long, 1-inch-wide white nylon web strap with a zinc-plated carbon steel snap and quick-release buckle
Run the strap through footman loops, then tighten and buckle to hold the tank in place
Quick Guide (pdf)
Portable Fuel Tank - 6 Gallon with GaugeAttwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Rugged materials and innovative design stand up to harsh marine conditions. 6-gallon tank adapts to virtually any outboard engine. Includes gauge.Features:
6 Gallon fuel capacity
Compatible with 1/4" NPT fuel fittings
Additional oil and ullage/vapor capacity
EPA Cap with automatic, high-flow vacuum valve
Cap with built-in vacuum valve means no need for manual venting
High-contrast & easy to read gauge
Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems
Meets EPA and CARB (California Air Resources Board) regulations
Complies with all ABYC/NMMA requirements for portable marine fuel tanks
Dimensions:
Length: (inch) 19.82"
Width: (inch) 13.50"
Height: (inch) 9.16"
*Fuel line is not includedWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)
