Troll-Tamer™ for Minn Kota Terrova & MotorGuide Trolling Motor Stabilizer Lock 8"-12" SpacingThe Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-Tamer™ Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-Tamer™ Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditionsThe latest models, RMC-108-DP and RMC-109-DP feature a clamp on shaft bracket to work with the latest in digital, wireless bow mount trolling motors, including Minn Kota Terrova, Auto Pilot, Riptide models & Motor Guide Xi5.
TWIST STEP™ Emergency Jack Plate Ladder - Universal FitTWIST STEP™ permits easy and convenient re-entry into the boat in emergencies. The Twist Step Emergency Jack Plate Ladder by T-H Marine is a must-have for boaters. This ladder is designed to easily attach to the jack plate of your boat, providing a safe and convenient way to get in and out of the water. Made from high-quality aluminum, this ladder is both strong and durable. The ladder features anti-slip treads for added safety and security, and the steps can be easily twisted up and out of the way when not in use. Whether you're swimming, fishing, or just enjoying a day on the water, this ladder is an essential accessory for your boat.Features:
Fits All Outboards
Permanently attaches to the engine or jack plate
Easily rotates and drops into position when needed
Non-corrosive all-aluminum design
Meets ABYC regulations for reboarding device
Mounts to any engine with bracket or directly to pre-drilled atlas jack plates
Non-slip material on both steps
Snaps securely into the slot when not in use
Specifications:
Material: Aluminum
Mount Compatibility: Any engine with bracket or directly to atlas jack plates
Configurations: Port side
Washdown Fitting with Shutoff ValveThis bulkhead-mounted washdown fitting is inexpensive, functional, easy to install, and rust-proof. This injection-molded plastic fitting is 2 1/4" in diameter and mounts in a 1 1/4" diameter hole with 3 countersunk screws. Features:
Black flange color
Injection-molded, UV-stabilized, and rust-proof
Standard garden hose thread outlet
The inlet fits 3/4" marine hose
Protective cap with retainer
The flange dimension is 2-1/4" OD
Installation in a 1-1/4" hole
Straight inlet configuration
Shutoff valve
Specifications:
Construction: Plastic
Box Dimensions: 4"H x 6"W x 8"L WT: 0.2 lbs
UPC: 733572012200
Washdown Valve with Chrome BaseA bulkhead-mounted washdown fitting that is inexpensive, functional, easy to install, and rust-proof. This injection-molded, chrome-plated ABS fitting is 2 1/4" in diameter and mounts in a 1 1/4" diameter hole with 3 countersunk screws. Features:
A barbed hose fitting connects 3/4 in. inside-diameter tubing
Standard hose threads with a protective cap that has a retaining strap are standard
Chrome-plated ABS flange
Injection-molded, UV-stabilized, and rust-proof
Standard garden hose thread outlet
The inlet fits 3/4 in. marine hose
Protective cap with retainer
The flange dimension is 2-1/4 in. OD
Installation in a 1-1/4" hole
Straight fitting with shutoff valve
Z-LAUNCH™ 10' Watercraft Launch Cord for Boats up to 16'Makes launching boat by yourself as easy as 1-2-3!Endorsed and used by professional angler Timmy Horton. Used by the majority of BASS and FLW fishing professionals.The Z-LAUNCH™ Watercraft Launch Cord makes solo watercraft launching easier than you've ever experienced. The no-hassle launch cord, made of premium elastics, uses automatically adjusting tension when you back your boat, jet ski, or tow tube into the water, so it won't jerk your watercraft around when you pull the trailer forward. Expandable to more than 20', the Z-LAUNCH™ Watercraft Launch Cord attaches in just 3 steps. Fasten a hook to your boat, connect a steel ring to the winch, and lock the winch. You're ready for the smoothest watercraft launching on the water.Features:
Simple and safe operation
No-hassle design
Attaches easily
Expands to more than 20'
Unlike rope, will not jerk your watercraft or you
Stay safe and dry launching your boat alone
Great for ramps with "no power" laws
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Length (Feet): 10'
Diameter (Inches): 0.625
Box Dimensions: 2"H x 8"W x 10"L WT: 1.35 lbs
UPC: 853333003794
Z-LAUNCH™ 20' Watercraft Launch Cord for Boats 23'-35'Makes launching boat by yourself as easy as 1-2-3!Endorsed and used by professional angler Timmy Horton. Used by the majority of BASS and FLW fishing professionals.The Z-LAUNCH™ Watercraft Launch Cord makes solo watercraft launching easier than you've ever experienced. The no-hassle launch cord, made of premium elastics, uses automatically adjusting tension when you back your boat, jet ski, or tow tube into the water, so it won't jerk your watercraft around when you pull the trailer forward. Expandable to more than 20', the Z-LAUNCH™ Watercraft Launch Cord attaches in just 3 steps. Fasten a hook to your boat, connect a steel ring to the winch, and lock the winch. You're ready for the smoothest watercraft launching on the water.Features:
Simple and safe operation
No-hassle design
Attaches easily
Expands to more than 20'
Unlike rope, will not jerk your watercraft or you
Stay safe and dry launching your boat alone
Great for ramps with "no power" laws
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Length (Feet): 20'
Diameter (Inches): 0.625
Box Dimensions: 3"H x 9"W x 12"L WT: 2.05 lbs
UPC: 733572090154
Z-Lock™ 4" Set Back Manual Single Adjust Jack PlateZ-Lock Jack Plate Revolutionary Design Adds Strength and Stability. The excellence of T-H Marine's HI-JACKER™ jack plate series continues with the Z-Lock Manual Jack Plate design upgrade.Features:
Z-Lock™ Jack Plate Design Eliminates Side Slippage
Matching slotted extrusions LOCK side plates in place
Strong Aircraft Grade Aluminum
Full ½” Material For Strength
Handles All V6 and V8 Outboards up to 300 hp
Easy to Adjust From Top of Jack
Available in 4", 6", 8", 10" and 12" setbacks
5" of Vertical Adjustment
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Push-In Drain Plug for 1-1/8" Thru-Hull & All Purpose DrainsThese push-in drain plugs are used to stop water flow through drains or overflows from baitwell or livewell. Also work well as plugs for sink drains and built in cooler drains.Plugs are a perfect compliment to T-H Marine overflow drain tubes.These pvc push-in drain plugs are injection molded of marine grade PVC for a long lifespan. Plugs feature a pull tab or pull ring for easy removal. They have double seal rings to assure positive sealing. Specifications:
Construction: Polymer
Box Dimensions: 1"H x 4"W x 5"L WT: 0.1 lbs
UPC: 733572032956
Push-In Drain Plug f/1-1/2" Thru-Hull DrainsThese push-in drain plugs are used to stop water flow through drains or overflows from baitwell or livewell. Also work well as plugs for sink drains and built in cooler drains.Plugs are a perfect compliment to T-H Marine overflow drain tubes.These pvc push-in drain plugs are injection molded of marine grade PVC for a long lifespan. Plugs feature a pull tab or pull ring for easy removal. They have double seal rings to assure positive sealing. Specifications:
Construction: Polymer
Box Dimensions: 2"H x 4"W x 7"L WT: 0.1 lbs
UPC: 733572032901
Paired with a 1/64 oz Trout Magnet jig head, “The Culper” is an ideal option for attacking smaller streams. Designed to be small and reactionary, The Culper’s 1.25” grub body and fluke tail is a necessity for any trout anglers tacklebox. As your sneaking along the creek side ducking in and out of thicket, hoping your shadow avoids the waters edge, you’ll eventually see that lone brook trout hanging out in the hydraulic cushion of a large boulder. Cast “The Culper” a few feet in front and watch the magic happen. Named after General Washington’s “Culper Ring” of spies during the Revolution, this bait option will assist you as you scout those elusive species of trout.
Quantity: 2 Jig hooks & 10 bodies in a Pack
Size: 1.25”
Plastic Firmness: IV (I-IV)
Stench: Mustard Gas (Garlic/Craw)
The Dagger from Fish or Die Bait Company, is the newest design added to our arsenal. Although specifically designed for fishing both Damiki and Hover style, The Dagger provides the ability to be applied in many different techniques, such as Drop shot, Ned Rig, & Neko Rig.With an isolated downward caudal fin to maximize it’s lifelike fluttering action from above, The Dagger will blend in as if it was just another minnow, shad, alewife, or shiner, separated from it’s main bait-ball.
The newest and most talked about finesse option released from Fish or Die, The Dagger is the “Tip Of The Spear” when it comes to sneaking up on those highly pressured Smallmouth!
Techniques include:
Hover Rig
Damiki Rig
Drop Shot
Neko Rig
Ned Rig
Quantity: 8 in a Pack / 6 in XL Pack
Size: 2.5” / 2.75” / 4”
Plastic Firmness: II (I-IV)
Stench: Napalm (Squid/Craw)
The Gadsden from Fish or Die Bait Company, is the first custom bait produced by Founder, Taylor Magditch. Although he specifically designed it for drop-shotting, The Gadsden provides the ability to be applied in many different techniques, such as Ned Rig, Damiki Rig, & Neko Rig.Paired with high-quality 3D eyes, a ribbed spine to allow fluent side-to-side movement, and a cupped tail to emphasize the fluttering action, The Gadsden is the epitome of a baitfish imitation.
The newest and most anticipated bait option released from Fish or Die’s arsenal, The Gadsden is sure to have you spending time screaming “Get The Net!”
Techniques include:
Drop Shot
Ned Rig
Neko Rig
Damiki Rig
Quantity: 7 in a Pack
Size: 3.6
Plastic Firmness: II (I-IV)
Stench: Mustard Gas (Garlic/Craw)
Inspired from various finesse presentations, The Sharpshooter incorporates a classic Ned body, while also adding unique twists you've come to expect from Fish or Die! With a flanged split-tail top, and appendages at the bottom portion to trigger their curiosity, the Sharpshooter will have you dialed in, when smaller profiles and finicky Bass are involved. Line up the Sharpshooters reticle, and fire away on those boulder hugging Smallmouth!
Techniques include:
Ned Rig
Drop Shot
Damiki Rig
Hover Rig
Quantity: 6 in a Pack
Size: 2.8”
Plastic Firmness: II (I-IV)
Stench: Agent Orange (Craw)
The Sherman from Fish or Die Bait Company, is the second custom bait produced by Founder, Taylor Magditch. This crawfish/creature hybrid provides Anglers with countless opportunities for rigging.With buoyant ribbed flappers and large floating claws providing you the most realistic profile to date, The Sherman will catch fish even in the toughest of conditions!
The most versatile craw/creature bait on the market, The Sherman will help even the most inexperienced Angler bring 5 to weigh-ins!
Techniques include:
Texas Rig
Ned Rig
Neko Rig
Carolina Rig
Tokyo Rig
Quantity: 4 in a Pack (4”) / 5 in a Pack (3”)
Size: 3 & 4 inch
Plastic Firmness: III (I-IV)
Stench: Agent Orange (Craw)
With a ribbed midsection, vertically flanged arrowhead tail, 3D eyes, angled pectoral fin, and the industries FIRST curved soft plastic body, our “Warbird” will soon be known as the preferred “fluke” styled bait on the market. With all of it’s attributes put together, the diving and darting action the Warbird displays will have even the most stubborn Bass swimming in for a taste! Due to it’s vertically aligned tail, the Warbird also outshines other baits while utilized as a chatterbait trailer. When cashing checks is your goal, lean on the bait that has the erraticness of a WW2 Warbird dipping and dodging enemy firepower!
Techniques include:
Texas Rig
Donkey Rig
Neko Rig
Damiki Rig
Swim Jig
Drop Shot
Quantity: 4 in a Pack (5.5”) / 5 in a pack (4”)
Size: 4” and 5.5” w/ Belly Slot
Plastic Firmness: III (I-IV)
Stench: Napalm (Craw/Squid)
