Fender Cleat - 3-1/2"The perfect compliment to the Attwood Neat Cleat, the Fender Cleat allows you to easily secure fenders to your boat with a simple lift. This retractable cleat is made of durable, enhanced cast 316 stainless steel it's simple design assures long-life and dependable operation.
Total Length: 3-1/2"
Total Width: 1-3/16"
Above deck-lowered/closed): 9/16"
Above deck- raised/open: 1-3/8"
Maximum Line Opening (adjusting heights): 3/4"
Install Depth: 1-7/8"
Mounting Hole Distance: 1-11/16"
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Flush Hatch PullThe new low profile flush hatch pull is an easy access handle for installation in lids, doors, compartments, and hatches. Handle is easy to grip, even with gloved hands. Durable ABS construction with black textured finish.
Fold-Down Incandescent Anchor/Masthead Light - 20" Horizontal Composite Base - 12VThree-mile, 360° light visibility for use on boats up to 65.6' (20M). Assembly includes Light Armor updated bases.Features:
Robust and easy to use
Freshwater and saltwater compatible
Simple, one-piece lens is sealed from water
Concealed, protected wiring at the base
Uses two festoon-style 8W lamps
Typical installation requires (2) #10 stainless steel screws of length suitable for deck or rail material
Will collapse and not break if accidentally hit
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Lens Color: White
Visible Range (Miles): 3nm
Housing: Black
Voltage - Input Range (Volts): 12v
LED: No
Box Dimensions: 3"H x 5"W x 25"L WT: 0.6 lbs
UPC: 022697720719
Fold-N-Stow Fishing Net - MediumFold down for convenient and compact storage or extend for added reach with this Attwood Fold-N-Stow Fishing Net. This net is large enough to be used in a variety of fishing applications.Features:
Constructed of durable, knot-free netting
A flip of the handle opens and locks the net into place
Easily pull back the trigger, and the net collapses down into a stowable size
Specifications:
Size: Medium
Fully Extended (L x W x D): 47" x 16" x 16"
Specifications:
Length (Inches): 47"
Width: 16"
Box Dimensions: 1"H x 4"W x 14"L WT: 0.5 lbs
UPC: 022697127730
Fold-N-Stow Fishing Net - SmallFold down for convenient and compact storage or extend for added reach with this Attwood Fold-N-Stow Fishing Net. This net is ideal for trout fishing. Features:
Constructed of durable, knot-free netting
A flip of the handle opens and locks the net into place
Easily pull back the trigger, and the net collapses down into a stowable size
Specifications:
Size: Small
Fully Extended (L x W x D): 24" x 12.5" x 10"
Specifications:
Length (Inches): 24"
Width: 12.5"
Box Dimensions: 1"H x 5"W x 21"L WT: 0.85 lbs
UPC: 022697127723
Quick Guide (pdf)
Fold-Up Drink Holder - Dual Ring - WhiteHolds coffee mugs with a handle, 12-ounce cans, or drink insulators. Mount quickly and easily on boats or RVs. Flip the small ring up to hold small drinks; for large drinks, flip the small ring down and use the large ring. When not in use, flip rings down and close the cover for convenient storage. 7/8" closed depth. Four holes for #10 screws.
Fold-Up Trailer Jack - 1000 lb Capacity - Single WheelFits 3 inch x 5 inch tongue and swings up and out of the way. Swing-up jack has a convenient sidewind handle and a tough 6 inch diameter polypropylene wheel.Features:Corrosion-resistant, zinc-plated steel tubingSpecifications:
Travel lift (inch): 10"
Lift (inch): 24"
Specifications:
Lift Capacity: 1000
Operation Method: Manual
Box Dimensions: 7"H x 7"W x 22"L WT: 13.95 lbs
UPC: 022697111272
Quick Guide (pdf)
Fold-Up Trailer Jack - 1500 lb Capacity - Dual WheelFits 3 inch x 5 inch tongue and swings up and out of the way. Swing-up jack has a convenient sidewind handle and TWO tough 6 inch diameter polypropylene wheels.Features:Corrosion-resistant, zinc-plated steel tubingSpecifications:
Travel lift (inch): 12"
Lift (inch): 26"
Specifications:
Lift Capacity: 1500
Operation Method: Manual
Box Dimensions: 6"H x 8"W x 23"L WT: 18 lbs
UPC: 022697111265
Quick Guide (pdf)
Foldable Sit-On-Top Clip-On Kayak SeatAdjustable kayak seat provides a padded seat cushion and ample back support.
Universal sizing for all sit-on-top kayaks
Four adjustable straps for a custom fit
Quick-drying, UV-resistant fabric
Corrosion-resistant hardware
Durable nylon covering
Frosted Globe All-Around Pole Light w/2-Pin Locking Collar Pole - 12V - 36"Part #: 5110-36-7Attwood has improved the world's most successful all-around lights. The Frosted Globe lights use a standardized lamp that is commonly available in marine, auto, and convenience stores. The lens has a clean, translucent look that provides a 2-mile 360 degree illimination for boats up to 65.6' (20m). Includes 9-watt wedge-base lamp.The locking collar poles offer "Universal Fit" because customers can use them with a wide variety of Attwood 2-pin straight or angled bases. This allows smaller inventory to cover more sales, because they even work as replacements in competitive bases, including Perko brand bases.Features:
12V
36"
2-Mile
360 Degree
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Lens Color: White
Visible Range (Miles): 2nm
Housing: White
Voltage - Input Range (Volts): 12v
LED: No
Box Dimensions: 2"H x 3"W x 42"L WT: 0.6 lbs
UPC: 022697110367
Quick Guide (pdf)
Fuel Tank Strap Set - 48 (inches) Long for 3-6 Gallon TanksThis Attwood Fuel Tank Strap Set contains everything needed to secure a 3-6-gallon fuel tank in place. This kit includes a 48-inch-long, 1-inch-wide white nylon web strap with a zinc-plated carbon steel snap and quick-release buckle. There are also 2 metal footman securing loops and the screws needed to install them. The strap can be run through the footman openings and then tightened and buckled to hold the tank in place.Features:
Includes 48-inch-long, 1-inch-wide white nylon web strap with a zinc-plated carbon steel snap and quick-release buckle
Run the strap through footman loops, then tighten and buckle to hold the tank in place
Quick Guide (pdf)
Fuel Tank Strap Set - 72 (inches) Long for 12 Gallon TanksThis Attwood Fuel Tank Strap Set contains everything needed to secure a 12-gallon fuel tank in place. This kit includes a 72-inch-long, 1-inch-wide white nylon web strap with a zinc-plated carbon steel snap and quick-release buckle. There are also 2 metal footman securing loops and the screws needed to install them. The strap can be run through the footman openings and then tightened and buckled to hold the tank in place.Features:
Includes 72-inch-long, 1-inch-wide white nylon web strap with a zinc-plated carbon steel snap and quick-release buckle
Run the strap through footman loops, then tighten and buckle to hold the tank in place
Quick Guide (pdf)
Fuel/Oil Mixing BottleAllows the addition of the exact amount of oil required for a 2-cycle engine. Oil level marks are in gallons and liters. Determines ratios for 100:1, 50:1, 24:1 and 10:1 mixes. Wide mouth, quart-size bottle.Features:
Markings to mix oil for 2 Cycle engine
Convenient wide-mouth, quart-size bottle
Clear oil level marks in black
Quick Guide (pdf)
Fuel/Water SeparatorKeep your engine running at peak efficiency by filtering out any water that may get into the fuel system. 10-micron filtering capability.Features:
Double seal for enhanced performance
Replacement for: Mercury 35-60494-1, Aqua Power 6031, GLM 24940, Sierra 18-78250, SMI 15494, Valmar 52113, Marpac 7-0872
Quick Guide (pdf)
Garboard Drain Plug Cast BronzeAttwood's Bronze Garboard Drain Plug reliably provides bilge drainage when hauling out, and it seals securely when not draining. It has machined and tapered pipe threads to ensure a watertight plug fit, and the nut can be removed with a wrench or pliers. This drain plug has a 3/8-inch neck depth and a ½-inch NOT drain. It installs easily and securely using #8 screws in 3 countersunk holes.
Gasoline Deck Fill - 1-1/2 inch Stainless Steel AlloyFor 1-1/2 (inch) inner diameter hose. This deck fill is imprinted and color-coded to specify GASOLINE. The flush cap is slotted for a separate key and features an O-ring that seals the cap watertight. Cap is attached by a stainless steel, beaded chain. Long neck accommodates thick deck laminations. Key sold separately.Features:
Highly-polished finish
“Gasoline” imprint with Red Color Code (Not for use with EPA Certified systems)
Specifications:
3-1/4 (inch) Fill Neck Length
1-7/8 (inch) installation hole size
3-inch flange size
Fits 1-1/2 (inch) I.D. Hose
*Requires a bonding wire to prevent sparking when the nozzle is inserted on gasoline and diesel models per USCG and ABYC H-24 requirements Quick Guide (pdf)
Gear Lube PumpThis Attwood Gear Lube Pump offers a universal fit so it can be used with the greatest number of engines. This pump is intended for use with a 32-ounce gear lube bottle, and it fits nearly any outboard or sterndrive. It comes with 1 Yamaha adapter.Features:
Fits nearly any outboard or sterndrive
Easy to install
Quick Guide (pdf)
Group 24 Battery Tray with StrapsA simple-to-install battery holder that fits into limited spaces. This tray is for batteries up to 10-1/2 inches in height. Provide a simple installation for changing or replacing batteries.Features:
The polypropylene hold-down strap has a positive-locking, quick-disconnect buckle
Molded base mounts with four #10 Panhead fasteners
Specifications:Inside Dimensions: 7" L x 11" W Quick Guide (pdf)
Group 27 Battery Tray with StrapsA simple-to-install battery holder that fits into limited spaces. This tray is for batteries up to 10-1/2 inches in height. Provide a simple installation for changing or replacing batteries.Features:
The polypropylene hold-down strap has a positive-locking, quick-disconnect buckle
Molded base mounts with four #10 Panhead fasteners
Specifications:Inside Dimensions: 12-3/8" L x 7-1/8" W Quick Guide (pdf)
29/31 Battery Tray with StrapsA simple-to-install battery holder that fits into limited spaces. This tray is for batteries up to 10-1/2 inches in height. Provide a simple installation for changing or replacing batteries.Features:
The polypropylene hold-down strap has a positive-locking, quick-disconnect buckle
Molded base mounts with four #10 Panhead fasteners
Specifications:Inside Dimensions: 12-7/8" L x 7" W Quick Guide (pdf)
LED Portable SpotlightAttwood's 12V LED Portable Spotlight provides bright light when you need it. Comes with a cigarette style 12V adapter plug and a 10' power cord. LED power indicator light denotes when power is being supplied to the light. Spotlight has a 50,000 - 100,000 hour life. Up to 400 lumens of power. Safety yellow and black color scheme.
5 watt
12V
LED
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Lumens: 400
Box Dimensions: 3"H x 8"W x 11"L WT: 0.95 lbs
UPC: 022697179470
HD2000 Heavy Duty Bilge Pump - 24V & 2000 GPHHeavy-Duty Blige Pumps integrate the highest quality bearings, brushes, alloys, and magnets designed to withstand extreme usage cycles. The pump also employs an exclusive shaft and motor compartment, reducing wear and significantly extending pump life. Advanced resin compositions are incorporated in the exterior to resist chemicals such as engine oil, aggressive detergents, and hose plasticizers. Attwood’s Heavy Duty bilge has unsurpassed durability and efficiency in a compact design to ensure electrical energy is converted to the pump rather than excess heat. Attwood's highest capacity pump, the ball-bearing design provides for cooler motor operation and longer life. Also, this pump delivers over 2000 GPH at open flow while drawing less than 7-amps.Features:
High-quality bearings, brushes, alloys, and magnets
Advanced resin compositions incorporated into the exterior
Specifications:
Rated Voltage: 24
Fuse Size: 7 Amp
Hose Size: (inch) 1-1/8" inner diameter
Specifications:
Gallons Per Hour: 2000 GPH
Operation: Non-Automatic
Outlet Size: 1-1/8"
Type: Electric
Volts: 24v
Box Dimensions: 6"H x 6"W x 7"L WT: 2.4 lbs
UPC: 022697477040
Quick Guide (pdf)
Heavy Duty Adjustable Rod HoldersFeatures an ergonomic design and easy to find rapid release latch mechanism. The large, easy-grip lock-nut offers easy adjustment. 180x vertical adjustment range for a variety of rod tip height settings. Use with casting rods and spinning rods. Includes Combo Mount.
Heavy Duty Adjustable Rod HoldersFeatures an ergonomic design and easy to find rapid release latch mechanism. The large, easy-grip lock-nut offers easy adjustment. 180° vertical adjustment range for a variety of rod tip height settings. Use with casting rods and spinning rods. Specifications:
Mounting Style: Flush
Box Dimensions: 3"H x 8"W x 10"L WT: 1.14 lbs
UPC: 022697050144
