HD2000 Heavy Duty Bilge Pump - 24V & 2000 GPHHeavy-Duty Blige Pumps integrate the highest quality bearings, brushes, alloys, and magnets designed to withstand extreme usage cycles. The pump also employs an exclusive shaft and motor compartment, reducing wear and significantly extending pump life. Advanced resin compositions are incorporated in the exterior to resist chemicals such as engine oil, aggressive detergents, and hose plasticizers. Attwood’s Heavy Duty bilge has unsurpassed durability and efficiency in a compact design to ensure electrical energy is converted to the pump rather than excess heat. Attwood's highest capacity pump, the ball-bearing design provides for cooler motor operation and longer life. Also, this pump delivers over 2000 GPH at open flow while drawing less than 7-amps.Features:
High-quality bearings, brushes, alloys, and magnets
Advanced resin compositions incorporated into the exterior
Specifications:
Rated Voltage: 24
Fuse Size: 7 Amp
Hose Size: (inch) 1-1/8" inner diameter
Specifications:
Gallons Per Hour: 2000 GPH
Operation: Non-Automatic
Outlet Size: 1-1/8"
Type: Electric
Volts: 24v
Box Dimensions: 6"H x 6"W x 7"L WT: 2.4 lbs
UPC: 022697477040
Quick Guide (pdf)
Heavy Duty Adjustable Rod HoldersFeatures an ergonomic design and easy to find rapid release latch mechanism. The large, easy-grip lock-nut offers easy adjustment. 180x vertical adjustment range for a variety of rod tip height settings. Use with casting rods and spinning rods. Includes Combo Mount.
Heavy Duty Adjustable Rod HoldersFeatures an ergonomic design and easy to find rapid release latch mechanism. The large, easy-grip lock-nut offers easy adjustment. 180° vertical adjustment range for a variety of rod tip height settings. Use with casting rods and spinning rods. Specifications:
Mounting Style: Flush
Box Dimensions: 3"H x 8"W x 10"L WT: 1.14 lbs
UPC: 022697050144
Heavy Duty Group 27 Battery TrayThis heavy-duty battery tray is made of non-corrosive black plastic. The tray includes an adjustable-height crossbar and stainless steel retaining bolts.Features:
Meets ABYC Standard E-10 and U.S. Coast Guard requirements
Install with #10 fasteners
Specifications:
Inside Dimensions: 12" L x 6-7/8" W
Battery Series: 27/27M
Quick Guide (pdf)
Heavy Duty Pro Series Rod HoldersThe Pro Series line of molded rod holders takes the Pro Series to the next level with the addition of the Combo Mount. All the Pro-Series unique features you've come to expect, with the ability to mount in multiple configurations.Designed for use with casting and spinning rod holders. Heavy-duty, deep-tooth gear lock securely holds rod holder in mounting base. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Heavy-Duty Adjustable Rod Holder with Combo Mount - White This rod holder is designed for use with baitcasting and spinning reels.Features:
An ergonomic design and easy-to-find rapid-release latch
Large, easy-grip lock-nut that offers an easy 180-degree vertical adjustment range for a variety of rod tip height settings
Specifications:Color: White*Sold as an Individual Quick Guide (pdf)
Heavy-Duty All-Plastic Adjustable Battery Tray - 24 SeriesAll-plastic and heavy duty, these battery trays use an adjustable cross bar and posts to allow for universal fit of both short and tall battery styles.
Contain no metal parts to corrode and no webbing straps to fade
Ergonomic nuts and bolts easily secure batteries
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Heavy-Duty All-Plastic Adjustable Battery Tray - 27 SeriesAll-plastic and heavy duty, these battery trays use an adjustable cross bar and posts to allow for universal fit of both short and tall battery styles.
Contain no metal parts to corrode and no webbing straps to fade
Ergonomic nuts and bolts easily secure batteries
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Heavy-Duty Battery Tray - 29/31 Battery SeriesThis heavy-duty Attwood battery tray is for a group 29 or group 31 battery and is made of non-corrosive black plastic.Features:
Includes an adjustable-height crossbar and stainless steel retaining bolts
Meets ABYC Standard E-10 and U.S. Coast Guard requirements
Install with #10 fasteners
Specifications:Inside Dimensions (L x W): 13-1/16" L x 6-7/8" W Quick Guide (pdf)
Heavy-Duty Bilge Pump 1700 SeriesPart #: 4730-4Heavy-Duty Bilge Pumps integrate the highest quality bearings, brushes, alloys and magnets designed to withstand extreme usage cycles. Pump all employs an exclusive shaft and motor compartment, reducing wear and significantly extending pump life. Advanced resin compositions incorporated in exterior to resist chemicals such as engine oil, aggressive detergents and hose plasticizers. Attwood's Heavy Duty bilge has unsurpassed durability and efficiency in a compact design to ensure electrical energy is converted to the pump rather than excess heat.The perfect upgrade from 1500 GPH rated pumps especially older and over-rated designs. Easily replaces 2000 GPH rated pumps. Delivers a true 1700 GPH at open flow while drawing less than 6-amps.Features:
12V
CE Rated
36" Wire
3-Year Warranty
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Gallons Per Hour: 1700 GPH
Operation: Non-Automatic
Outlet Size: 1-1/8"
Volts: 12v
Type: Electric
Box Dimensions: 6"H x 6"W x 7"L WT: 2.4 lbs
UPC: 022697437044
Quick Guide (pdf)Brochure (pdf)
Heavy-Duty Bilge Pump 2000 SeriesPart #: 4760-4Heavy-Duty Blige Pumps integrate the highest quality bearings, brushes, alloys and magnets designed to withstand extreme usage cycles. Pump all employs an exclusive shaft and motor compartment, reducing wear and significantly extending pump life. Advanced resin compositions incorporated in exterior to resist chemicals such as engine oil, aggressive detergents and hose plasticizers. Attwood's Heavy Duty bilge has unsurpassed durability and efficiency in a compact design to ensure electrical energy is converted to the pump rather than excess heat.Attwood's highest capacity pump! Ball-bearing design provides for cooler motor operation and longer life, Delivers over 2000 GPH at open flow while drawing less than 7-amps.Features:
12V
CE Rated
36" Wire
3-Year Warranty
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Gallons Per Hour: 2000 GPH
Operation: Non-Automatic
Outlet Size: 1-1/8"
Volts: 12v
Type: Electric
Box Dimensions: 6"H x 7"W x 7"L WT: 2.4 lbs
UPC: 022697476043
Quick Guide (pdf)Brochure (pdf)
Honda 3/8" Barb Female Hose Fitting - 90HP+This Attwood hose fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels. The barb fitting fits 3/8" I.D. (Inner Diameter) hose. Clamps are not included and use thread sealant on all threads.Features:
Honda fuel fitting
Designed for 90HP+ (Large Bore)
Material Construction: Chrome-plated Brass
*Specifically mates to Attwood part number: 8901-6 Quick Guide (pdf)
Honda 3/8" Barb Female Hose Fitting - Engine EndThis Attwood Engine-End Hose Fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels. The barb fitting fits 3/8" I.D. (Inner Diameter) hose. Clamps are not included and use thread sealant on all threads.Features:
Honda fitting
Engine-End fitting
Material Construction: Acetal
Rectangle locking post
Quick Guide (pdf)
Honda Fuel Line Kit - 3/8" Diameter x 6' LengthThis EPA-certified Attwood Honda Fuel Line Kit reliably delivers fuel to your Honda engine and provides the ultimate in performance, safety, and value. The kit includes a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C.Features:
These Attwood Hose Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and engine end hose fitting 8900-6
Hose and tank fittings come with pre-applied thread sealant
There’s also a multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance
For Honda engines and tanks
This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines
*No Fuel Demand Valve is included in this kit Specifications:
ID Diameter (inches): 3/8"
Length (Feet): 6'
Box Dimensions: 3"H x 9"W x 13"L WT: 1.3 lbs
UPC: 022697938220
Quick Guide (pdf)
Honda Tank Fitting - 1/4" NPT Thread - 90HP+This Attwood hose fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels. This threaded fitting has a 1/4" male NPT thread. Also, use thread sealant on all threads, and clamps are not included.Features:
Honda male fitting
Designed for 90HP+ (Large Bore)
Material Construction: Chrome-plated Brass
*Specifically mates to Attwood part number: 8902-6 Quick Guide (pdf)
HubMate Wheel Bearing ProtectorsHubMate™ bearing protectors replace the dust caps in the wheel hub. The accessible grease fitting allows you to add grease without disassembling it. Positive grease pressure keeps water and dirt out. Features:
Outer hub inner diameter: 1.78 inches
Automatically lubricates, reducing wear and prolonging bearing life
Covers are custom-fitted PVC
In-Line Fuel Overflow ProtectorThe fuel vent line surge protector helps avoid refueling spills because the surge-free line causes automatic fuel nozzles to shut off as the tank fills.With non-automatic nozzles, the surge protector causes a gurgling sound to indicate that the tank is full.Incorporates a ball-style check valve with internal baffling.Features:
Meets ABYC Standard H-24
Install in-line with traditional tank vent systems that use standard 5/8" ID vent hose
Compact size and operates in any orientation within 45° of vertical
Withstands oil, gas, alcohol-blended fuels
Includes 2 hose clamps for installation in the vent hose
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Johnson/Evinrude Fuel Line Kit - 3/8" Diameter x 6' Length with Fuel Demand ValveThis EPA-certified Attwood Johnson/Evinrude Fuel Line Kit reliably delivers fuel to your Johnson or Evinrude engine and provides the ultimate in performance, safety, and value. The kit comes with a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C. Also, the kit includes a multi-layer low-permeation primer bulb and a Fuel Demand Value that eliminates engine flooding and spillage by preventing pressurized fuel from reaching the engine.Features:
These Attwood Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and engine end hose fitting 8889LP6
In-Line Fuel Demand Valve
Hose and tank fittings come with pre-applied thread sealant
Reliably delivers fuel to your Johnson or Evinrude engine
*This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines Specifications:
ID Diameter (inches): 3/8"
Length (Feet): 6'
Box Dimensions: 2"H x 9"W x 13"L WT: 1.35 lbs
UPC: 022697938053
Quick Guide (pdf)
Johnson/Evinrude/OMC (Outboard Marine Corporation) Female Hose Fitting - Tank Or Engine End - 3/8" BarbFor use on both ends of the fuel line to connect tank fitting and motor. The hose barb fits a 5/16" inner diameter hose.Features:
Johnson, Evinrude, and OMC fitting
Tank or Engine End
Material Construction: Acetal
*Specifically mates to Attwood part number: 8883-6 Quick Guide (pdf)
Johnson/Evinrude/OMC (Outboard Marine Corporation) Male Tank Fitting - 1/4" NPTThis Attwood male tank fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels. The threaded fitting has a 1/4" male NPT thread and uses thread sealant on all threads. Clamps are not included.Features:
Johnson, Evinrude, and OMC fitting
Quick-connect ¼-inch male thread makes installation easy
Solid machined brass for dependable performance, peace of mind
*Specifically mates to Attwood part numbers: 8889LP6 & 88FHE516-6 Quick Guide (pdf)
Kayak 15" Foot Braces - PairPart #: 11940-1Ligthtweight design fits both sit in and sit on top style kayaks. Trigger lock design allow for easy adjustment. Tracks use a universal mounting hole pattern that works in a variety of kayaks.Mounting hardware is not included.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Kayak Car-Top Carrier KitPart #: 11438-7A simple, convenient kit for carrying a kayak on car top. Includes two supporting foam blocks that snap on boat's gunwale and help prevent scratches on car top. Two straps with adjusting buckles and clips. Includes 20' of polypropylene rope and S-hooks to secure bow and stern to bumpers. Straps are sturdy poly web with vinyl-coated clips.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Kayak Grapnel Anchor KitGrapnel anchor will hold your kayak, PWC, canoe or float tube in mud, sand, gravel and rock. Includes a 3 lb. silver grapnel anchor with 1/4" diameter x 20' of black diamond braided MFP anchor rope and mesh bag with drawstring.
Kayak Hand Bilge Pump This Attwood Hand-Operated Bilge Pump quickly and safely removes unwanted water and other liquids from small craft such as kayaks, canoes, and small fishing boats. This pump can remove up to 8 gallons per minute, and no hose is required. The pump is an 18-inch-long pump and has an ergonomic hand grip that keeps the pump afloat if dropped into the water.Features:
Ideal for small craft such as kayaks, canoes, and small fishing boats
(inch) 18" long
Sturdy, impact-resistant, and lightweight plastic construction
*No hose is required Specifications:
Gallons Per Minute: 8 GPM
Operation: Non-Automatic
Type: Manual
Box Dimensions: 4"H x 4"W x 21"L WT: 3.7 lbs
UPC: 022697115959
