PowerBase Light - Automated Light MountThe intelligent, automated folding light base. PowerBase easily stows and deploys lights and antennas with the push of a button.PowerBase is the only intelligent light/antenna with object detection technology:
SafeGuard Breakaway: In the event of an impact, the powerbase will safely return to a stowed position preventing potential damage to the fiberglass top
SmartDeploy Backdrive: In the event of a blocked deployment, PowerBase senses an obstruction and reverses the light/antenna back to its starting position
PowerBase is designed for worry-free installation and operation from the assembly line to the marina:
Standardized mounting patterns allow for upgradeability
Intuitive control without switch limitations
PowerBase is compatible/built with the leading industry equipment:Available in masthead and all-round configurations featuring Attwood’s LightArmor LED technology (PowerBase Light)Compatibility:Compatible with Attwood LightArmor LED All-Round and Masthead Nav LightsRequired for installation (not included):
7/32” & 3/4” Drill Bits
#2 Phillips Driver
Marine Grade Sealant
PTFE Lubricant
2x 1-1/4” Fender Washers and 10-24
Nuts (If Through-Hole Mounting)
2-Position SPST Switch (with LED Backlight)
PowerBase Light not included
Quick Guide (pdf)Owner's Manual (pdf)
PowerGuard PRO Battery BoxExperience the difference between PowerGuard PRO Series Battery Protection
Upward-facing vents let gases out while reducing water in-take by 94% - vs. PowerGuard 27 Series
Polypropylene composite material is impervious to acid leaks and other external factors
Engineered spill channels direct water away from the battery
With PowerGuard PRO, the battery is always within reach
Folding entry panels provide easy access to the battery terminals without the need to remove the mounting strap
A versatile bidirectional design allows contact from any angle
Ergonomic handles provide more comfort when transporting the battery
PowerGuard PRO takes security seriously
Reinforced mounting hardware ensures the battery and box stay anchored
Spacer blocks are removable to fit Group 24, 27, and 31 batteries
The snap-locking lid gives confidence that the battery will remain secure
Specifications:
Dimensions with Lid Installed - Internal Dimensions (L x W x H): 13-1/8" x 7" x 11"
Outside Dimensions (L x W x H): 21" x 11-1/4" x 11-1/2"
Color/Style: Black/Vented
Quick Guide (pdf)
Primer Bulb - 1/4" Inner Diameter HoseThis Atwood Primer Bulb is engineered and constructed to deliver the most reliable priming and long-term leak-free performance. The exclusive three-layer construction prevents collapse under vacuum and prevents ballooning or bursting under pressure. The low-permeation material prevents fuel evaporation, and this bulb delivers 60 percent more output per pump than leading competitors.Features:
It is intended for use with a 1/4-inch interior diameter hose
Exclusive high-efficiency check-valves deliver faster priming and low fuel restriction (less than 1kPa restriction at 50 liters/hour)
Engineered hose barbs and stainless steel stepless clamps ensure leak-free performance
This bulb is compatible with Ethanol blended fuels, and it is EPA and CARB certified
Specifications:
ID Diameter (inches): 1/4"
Box Dimensions: 2"H x 4"W x 5"L WT: 0.3 lbs
UPC: 022697931474
Primer Bulb - 3/8" Inner Diameter HoseThis Atwood Primer Bulb is engineered and constructed to deliver the most reliable priming and long-term leak-free performance. The exclusive three-layer construction prevents collapse under vacuum and prevents ballooning or bursting under pressure. The low-permeation material prevents fuel evaporation, and this bulb delivers 60 percent more output per pump than leading competitors.Features:
It is intended for use with a 3/8-inch interior diameter hose
Exclusive high-efficiency check-valves deliver faster priming and low fuel restriction (less than 1kPa restriction at 50 liters/hour)
Engineered hose barbs and stainless steel stepless clamps ensure leak-free performance
This bulb is compatible with Ethanol blended fuels, and it is EPA and CARB certified
Specifications:
ID Diameter (inches): 3/8"
Box Dimensions: 3"H x 5"W x 7"L WT: 1.3 lbs
UPC: 022697930385
Quick Guide (pdf)
Primer Bulb - 5/16" Inner Diameter HoseThis Atwood Primer Bulb is engineered and constructed to deliver the most reliable priming and long-term leak-free performance. The exclusive three-layer construction prevents collapse under vacuum and prevents ballooning or bursting under pressure. The low-permeation material prevents fuel evaporation, and this bulb delivers 60 percent more output per pump than leading competitors.Features:
It is intended for use with a 5/16-inch interior diameter hose
Exclusive high-efficiency check-valves deliver faster priming and low fuel restriction (less than 1kPa restriction at 50 liters/hour)
Engineered hose barbs and stainless steel stepless clamps ensure leak-free performance
This bulb is compatible with Ethanol blended fuels, and it is EPA and CARB certified
Specifications:
ID Diameter (inches): 5/16"
Box Dimensions: 5"H x 5"W x 5"L WT: 0.55 lbs
UPC: 022697935168
Quick Guide (pdf)
Prop Wrench Set - Fits 17/32" to 1-1/4" Prop NutsMultiple socket sizes for all prop maintenance.
Offers multiple sockets to fit from 17/32" to 1-1/4", allowing consumers to service multiple props
Built of durable plastic
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Material: Plastic
Box Dimensions: 1"H x 7"W x 16"L WT: 1 lbs
UPC: 022697137074
Pulsar Bi-Color 2-Pin Stowaway Light - 10" StraightAttwood offers a variety of durable, stowaway, combination pole-mounted sidelights for bow mounting. Each features an anodized aluminum pole that raises the light head for visibility above trolling motors, anchors, or other equipment on the bow. When not in use, lights can be removed from the base and stowed, so they won’t interfere with fishing or anchoring.Features:
1-mile, 225° light visibility for boats up to 39.4 ft. (12 m)
Includes 9W wedge base lamp
2-Pin Locking-Collar Pole
Specifications:Pole Length: (inch) 10" straight*Locking collar design is compatible only with LightArmor Plug-In Bases Specifications:
Visible Range (Miles): 1
Box Dimensions: 3"H x 5"W x 16"L WT: 0.4 lbs
UPC: 022697921079
Quick Guide (pdf)
Pulsar Bi-Color 2-Pin Stowaway Light - 10"AngledAttwood offers a variety of durable, stowaway, combination pole-mounted sidelights for bow mounting. Each features an anodized aluminum pole that raises the light head for visibility above trolling motors, anchors, or other equipment on the bow. When not in use, lights can be removed from the base and stowed, so they won’t interfere with fishing or anchoring.Features:
1-mile, 225° light visibility for boats up to 39.4 ft. (12 m)
Includes 9W wedge base lamp
2-Pin Locking-Collar Pole
Specifications:Pole Length: (inch) 10" Angled*Locking collar design is compatible only with LightArmor Plug-In Bases Specifications:
Lens Color: Red/Green
Visible Range (Miles): 1
Box Dimensions: 3"H x 6"W x 17"L WT: 0.35 lbs
UPC: 022697911070
Quick Guide (pdf)
Push/Pull Switch Three-PositionThree-position, off/on/on. For operating running lights and anchor lights separately.These switches have large, easy-to-pull handles. They are commonly used for operating lights. 3/4" diameter chrome-plated knob, brass case. Include screw terminals for connection without a wire lug. For 12-volt D.C. only. Not external ignition protected.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Action: On/On/Off
Color: Chrome Plated
Box Dimensions: 1"H x 4"W x 7"L WT: 0.2 lbs
UPC: 022697759436
Push/Pull Switch Two-PositionTwo-position, off/on. For operating one set of lights or other accessory.These switches have large, easy-to-pull handles. They are commonly used for operating lights. 3/4" diameter chrome-plated knob, brass case. Include screw terminals for connection without a wire lug. For 12-volt D.C. only. Not external ignition protected.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Action: On/Off
Color: Chrome Plated
Box Dimensions: 2"H x 3"W x 7"L WT: 0.3 lbs
UPC: 022697756336
Quick-Release Gunwale Strap 2" x 13'Gunwale straps secure the entire aft section of the boat over the gunwale to the trailer and restrict vertical movement while on the road. Specifications:2 inches wide13 ft. longWebbing:
Strong webbing
Resists rot, oils, gasoline, and most chemicals
Buckle:
Quick-Release (Over-Center) buckle
Strong and secure, yet easy to use
Quick tightening
Cinch tight and secure by depressing buckle handle
Release by lifting the buckle handle
Hook:
J-Hook with snap-closure for secure, easy attachment
Electrostatic Discharge Coating (EDC) finish prevents corrosion
Heavy gauge
Specifications:
Diameter (Inches): 2.00
Length (Feet): 13.0
Box Dimensions: 4"H x 6"W x 9"L WT: 1.15 lbs
UPC: 022697152213
Quick Guide (pdf)
Quick-Release Transom Tie-Down Straps 2" x 4' PairWhen properly secured to transom eyes and trailer, transom straps reduce vertical and lateral movement to safely secure the boat to the trailer. They also reduce the bouncing of the boat on the trailer pads or rollers. Two inches wide for larger tailorable boats.Specifications:
2 inches wide
4 ft. long
Webbing:
Strong webbing
Resists rot, oils, gasoline, and most chemicals
Buckle:
Quick-Release (Over-Center) buckle
Strong and secure, yet easy to use
Quick tightening
Cinch tight and secure by depressing buckle handle
Release by lifting the buckle handle
Hook:
Vinyl-Coated S-Hook to prevent scratching boat or trailer finish
Corrosion resistant
Heavy-gauge
Special Features:
Protective pad behind the buckle to prevent marring and scratches on gel coat and painted surfaces
Hook-N-Loop closure secures the buckle handle in the locked position
Specifications:
Diameter (Inches): 2.00
Length (Feet): 4.00
Box Dimensions: 4"H x 6"W x 8"L WT: 1.75 lbs
UPC: 022697152329
Quick Guide (pdf)
Replacement Cartridge for Tsunami 1200 MK21200 GPH Replacement Attwood Tsunami motor cartridge. For use with Attwood Tsunami MK2 (56 series) Bilge and Aerator pumps. Attwood Tsunami MK2 motor cartridge eliminates air locks.Features:
1200 GPH Replacement Attwood Tsunami motor cartridge
For use with Attwood Tsunami MK2 (56 series) Bilge and Aerator pump
Attwood Tsunami MK2 motor cartridge eliminates air locks
Rope LadderAttwood's 5-step, white boarding ladder. Sturdy 11-3/4" blow molded steps, textured step surface and steps connecting by a nylon rope with a top loop to secure to a cleat or a railing.Features:
Non-anodized aluminum tubing
Polyethylene steps
11" hooks and support legs
Folds flat for storage
Sturdy 11-3/4" blow molded steps
Textured step surface for sure footing
Steps connected by a nylon rope with top loop that quickly secures to cleat or railing
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Sahara MK2 S1200 Bilge Pump 1200 GPH - 12V - AutomaticEngineered for extended service life, these pumps feature a cool-running design and quality components, including permanent magnet motors, stainless steel shafts, and steel-reinforced seals.Features:
Sahara Mk2 is the only automatic bilge pump that eliminates air-locks
Patented X-Air™ Impeller ejects trapped air in the pump and pipework.
Sahara Mk2 is the easiest automatic bilge pump to install and service
External mounting feet and integrated outlet reduces time and effort.
Universal mounting pattern makes replacement simple.
Service pump cartridge from hard-to-reach areas using only one hand.
Sahara Mk2 is the most reliable automatic bilge pump in freshwater and saltwater applications
Attwood’s SteadySwitch™ reduces cycling and extends the life of the pump.
40% better protection against water ingress and electrolysis - vs. MK1.
2X better protection against water ingress and electrolysis - than the leading competition.
Universal mounting patterns make it backwards compatible with the most popular bilge pumps on the market.
Specifications:
Gallons Per Hour: 1200 GPH
Operation: Automatic
Outlet Size: 1" or 1-1/8"
Volts: 12v
Type: Pumps/Drives
Box Dimensions: 4"H x 6"W x 7"L WT: 1.35 lbs
UPC: 022697023483
Owner's Manual (pdf)Brochure (pdf)
Sahara MK2 S1200 Bilge Pump 1200 GPH - 24V - AutomaticEngineered for extended service life, these pumps feature a cool-running design and quality components, including permanent magnet motors, stainless steel shafts, and steel-reinforced seals.Features:
Sahara Mk2 is the only automatic bilge pump that eliminates air-locks
Patented X-Air™ Impeller ejects trapped air in the pump and pipework.
Sahara Mk2 is the easiest automatic bilge pump to install and service
External mounting feet and integrated outlet reduces time and effort.
Universal mounting pattern makes replacement simple.
Service pump cartridge from hard-to-reach areas using only one hand.
Sahara Mk2 is the most reliable automatic bilge pump in freshwater and saltwater applications
Attwood’s SteadySwitch™ reduces cycling and extends the life of the pump.
40% better protection against water ingress and electrolysis - vs. MK1.
2X better protection against water ingress and electrolysis - than the leading competition.
Universal mounting patterns make it backwards compatible with the most popular bilge pumps on the market.
Specifications:
Volts: 24v
Type: Pumps/Drives
Gallons Per Hour: 1200 GPH
Operation: Automatic
Outlet Size: 1" or 1-1/8"
Box Dimensions: 4"H x 6"W x 7"L WT: 1.35 lbs
UPC: 022697023490
Owner's Manual (pdf)Brochure (pdf)
Sahara MK2 S500 Bilge Pump 500 GPH - 12V - AutomaticEngineered for extended service life, these pumps feature a cool-running design and quality components, including permanent magnet motors, stainless steel shafts, and steel-reinforced seals.Features:
Sahara Mk2 is the only automatic bilge pump that eliminates air-locks
Patented X-Air™ Impeller ejects trapped air in the pump and pipework.
Sahara Mk2 is the easiest automatic bilge pump to install and service
External mounting feet and integrated outlet reduces time and effort.
Universal mounting pattern makes replacement simple.
Service pump cartridge from hard-to-reach areas using only one hand.
Sahara Mk2 is the most reliable automatic bilge pump in freshwater and saltwater applications
Attwood’s SteadySwitch™ reduces cycling and extends the life of the pump.
40% better protection against water ingress and electrolysis - vs. MK1.
2X better protection against water ingress and electrolysis - than the leading competition.
Universal mounting patterns make it backwards compatible with the most popular bilge pumps on the market.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Type: Pumps/Drives
Outlet Size: 3/4" or 1"
Operation: Automatic
Volts: 12v
Gallons Per Hour: 500 GPH
Box Dimensions: 4"H x 6"W x 7"L WT: 1.25 lbs
UPC: 022697023452
Owner's Manual (pdf)Brochure (pdf)
Sahara MK2 S800 Bilge Pump 800 GPH - 12V - AutomaticEngineered for extended service life, these pumps feature a cool-running design and quality components, including permanent magnet motors, stainless steel shafts, and steel-reinforced seals.Features:
Sahara Mk2 is the only automatic bilge pump that eliminates air-locks
Patented X-Air™ Impeller ejects trapped air in the pump and pipework.
Sahara Mk2 is the easiest automatic bilge pump to install and service
External mounting feet and integrated outlet reduces time and effort.
Universal mounting pattern makes replacement simple.
Service pump cartridge from hard-to-reach areas using only one hand.
Sahara Mk2 is the most reliable automatic bilge pump in freshwater and saltwater applications
Attwood’s SteadySwitch™ reduces cycling and extends the life of the pump.
40% better protection against water ingress and electrolysis - vs. MK1.
2X better protection against water ingress and electrolysis - than the leading competition.
Universal mounting patterns make it backwards compatible with the most popular bilge pumps on the market.
Specifications:
Type: Pumps/Drives
Outlet Size: 3/4" or 1"
Operation: Automatic
Volts: 12v
Gallons Per Hour: 800 GPH
Box Dimensions: 4"H x 6"W x 7"L WT: 1.35 lbs
UPC: 022697023469
Owner's Manual (pdf)Brochure (pdf)
Sahara MK2 S800 Bilge Pump 800 GPH - 24V - AutomaticEngineered for extended service life, these pumps feature a cool-running design and quality components, including permanent magnet motors, stainless steel shafts, and steel-reinforced seals.Features:
Sahara Mk2 is the only automatic bilge pump that eliminates air-locks
Patented X-Air™ Impeller ejects trapped air in the pump and pipework.
Sahara Mk2 is the easiest automatic bilge pump to install and service
External mounting feet and integrated outlet reduces time and effort.
Universal mounting pattern makes replacement simple.
Service pump cartridge from hard-to-reach areas using only one hand.
Sahara Mk2 is the most reliable automatic bilge pump in freshwater and saltwater applications
Attwood’s SteadySwitch™ reduces cycling and extends the life of the pump.
40% better protection against water ingress and electrolysis - vs. MK1.
2X better protection against water ingress and electrolysis - than the leading competition.
Universal mounting patterns make it backwards compatible with the most popular bilge pumps on the market.
Specifications:
Volts: 24v
Type: Pumps/Drives
Outlet Size: 3/4" or 1"
Operation: Automatic
Gallons Per Hour: 800 GPH
Box Dimensions: 2"H x 4"W x 8"L WT: 1.5 lbs
UPC: 022697023476
Owner's Manual (pdf)Brochure (pdf)
Scupper ValveProvides a water exit for boats with self-bailing cockpits. Acetal construction. Accommodates 3875B thru-transom thru-hull connector (screw holes must be drilled for installation.)
Diameter: 2-7/8"
Use as a replacement valve for 3881 Thru-Transom Scupper
Caution: Thru-Hull connectors are designed for installation above the water line only.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Service Kit for S1200 Bilge PumpsSpecifications:
Outlet Diameter: 1" (25mm) & 1-1/8" (28mm)
Compatible with Tsunami Bilge Mk2
Kit includes (1 each):
90-degree outlet
Straight outlet
Washer
Non-return/check valve
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
