Honda 3/8" Barb Female Hose Fitting - Engine EndThis Attwood Engine-End Hose Fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels. The barb fitting fits 3/8" I.D. (Inner Diameter) hose. Clamps are not included and use thread sealant on all threads.Features:
Honda fitting
Engine-End fitting
Material Construction: Acetal
Rectangle locking post
Quick Guide (pdf)
Honda 3/8" Barb Female Hose Fitting - 90HP+This Attwood hose fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels. The barb fitting fits 3/8" I.D. (Inner Diameter) hose. Clamps are not included and use thread sealant on all threads.Features:
Honda fuel fitting
Designed for 90HP+ (Large Bore)
Material Construction: Chrome-plated Brass
*Specifically mates to Attwood part number: 8901-6 Quick Guide (pdf)
Honda Tank Fitting - 1/4" NPT Thread - 90HP+This Attwood hose fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels. This threaded fitting has a 1/4" male NPT thread. Also, use thread sealant on all threads, and clamps are not included.Features:
Honda male fitting
Designed for 90HP+ (Large Bore)
Material Construction: Chrome-plated Brass
*Specifically mates to Attwood part number: 8902-6 Quick Guide (pdf)
Yamaha Female Hose Fitting - Tank Or Engine End - 5/16" BarbThis Attwood hose fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels. Barbed fitting fits 5/16" I.D. (Inner Diameter) hose and clamps are not included. Also, use thread sealant on all threads.Features:
Yamaha fitting
Tank or Engine End
Material Construction: Acetal
*Specifically mates to Attwood part number: 8897-6 Quick Guide (pdf)
Yamaha Tank Fitting - 1/4" NPT ThreadConnect your tank and fuel lines with confidence. Solid machined brass construction holds up to lead, unleaded, and alcohol-based fuels. Designed for Yamaha Brand engines and tanks and fits select Mercury/Mariner Brand engines.Features:
Quick-connect 1/4-inch male thread makes installation easy
Solid machined brass for dependable performance and peace of mind
Designed for Yamaha and select Mercury/Mariner brand engines that use leaded, unleaded, and alcohol-blended fuel
*Specifically mates to Attwood part numbers: 8896LP6 & 88FHY516-6 Quick Guide (pdf)
Johnson/Evinrude/OMC (Outboard Marine Corporation) Female Hose Fitting - Tank Or Engine End - 3/8" BarbFor use on both ends of the fuel line to connect tank fitting and motor. The hose barb fits a 5/16" inner diameter hose.Features:
Johnson, Evinrude, and OMC fitting
Tank or Engine End
Material Construction: Acetal
*Specifically mates to Attwood part number: 8883-6 Quick Guide (pdf)
Johnson/Evinrude/OMC (Outboard Marine Corporation) Female Hose Fitting - Tank Or Engine End - 5/16" BarbFor use on both ends of the fuel line to connect tank fitting and motor. The hose barb fits a 5/16" inner diameter hose.Features:
Johnson, Evinrude, and OMC fitting
Tank or Engine End
Material Construction: Acetal
*Specifically mates to Attwood part number: 8883-6 Quick Guide (pdf)
Johnson/Evinrude/OMC (Outboard Marine Corporation) Male Tank Fitting - 1/4" NPTThis Attwood male tank fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels. The threaded fitting has a 1/4" male NPT thread and uses thread sealant on all threads. Clamps are not included.Features:
Johnson, Evinrude, and OMC fitting
Quick-connect ¼-inch male thread makes installation easy
Solid machined brass for dependable performance, peace of mind
*Specifically mates to Attwood part numbers: 8889LP6 & 88FHE516-6 Quick Guide (pdf)
Mercury/Yamaha Female Hose Engine Fitting - 3/8" BarbConnect your tank and fuel lines with confidence; the solid machined-brass construction holds up to leaded, unleaded, and alcohol-based fuels for.Features:
Solid machined brass for dependable performance, peace of mind
Hose female
Tank or Engine End
Replaces Yamaha 6Y1-24305-03
*Specifically mates to Attwood part number: 8897-6 Quick Guide (pdf)
Mercury Female Hose Tank Fitting - 3/8" BarbConnect your tank and fuel lines with confidence; the durable Acetal construction holds up to lead, unleaded, and alcohol-based fuels. Specifically designed for Mercury/Mariner Brand engines and tanks.Features:
Easy installation with barbed fittings for 3/8 inch I.D. (interior diameter) hose (purchase hose clamps separately)
Mercury/Mariner Tank Fitting
Extremely Versatile: Designed for leaded, unleaded, and alcohol-blended fuel
(inch) 3/8" Barb
Hose Female
*Specifically mates to Attwood part number: 8873-6 Quick Guide (pdf)
Mercury Tank Fitting - 1/4" NPT ThreadConnect your tank and fuel lines with confidence; solid machined brass construction holds up to lead, unleaded, and alcohol-based fuels. Specifically designed for Mercury/Mariner Brand engines and tanks.Features:
Solid machined brass for dependable performance, peace of mind
Quick-connect ¼-inch male thread makes installation easy
Extremely Versatile: Designed for leaded, unleaded, and alcohol-blended fuel
1/4" NPT (National Pipe Thread)
Specifically designed for Mercury/Mariner Brand engines and tanks
*Specifically mates to Attwood part number: 8890LP6 Quick Guide (pdf)
Honda Fuel Line Kit - 3/8" Diameter x 6' LengthThis EPA-certified Attwood Honda Fuel Line Kit reliably delivers fuel to your Honda engine and provides the ultimate in performance, safety, and value. The kit includes a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C.Features:
These Attwood Hose Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and engine end hose fitting 8900-6
Hose and tank fittings come with pre-applied thread sealant
There’s also a multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance
For Honda engines and tanks
This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines
*No Fuel Demand Valve is included in this kit Specifications:
ID Diameter (inches): 3/8"
Length (Feet): 6'
Box Dimensions: 3"H x 9"W x 13"L WT: 1.3 lbs
UPC: 022697938220
Quick Guide (pdf)
Johnson/Evinrude Fuel Line Kit - 3/8" Diameter x 6' Length (No Tank Fitting)This Attwood Fuel Line Kit is a reliable replacement for the original equipment on Johnson and Evinrude engines and tanks. This kit includes a 6-foot-long, 3/8-In. diameter fuel line and a multi-layer, low-permeation primer bulb.Features:
These Attwood Hose Fittings Are Included: Two (2) 8889LP6 hose fittings for the tank end and for the engine end
For Johnson/Evinrude engines and tanks
*No Fuel Demand Valve or Tank Fitting is included in this kit Specifications:
ID Diameter (inches): 3/8"
Length (Feet): 6'
Box Dimensions: 3"H x 9"W x 12"L WT: 1.2 lbs
UPC: 022697938169
Quick Guide (pdf)
Mercury Fuel Line Kit - 3/8" Dia. x 6' Length with Fuel Demand ValveThis EPA-certified Attwood Mercury Fuel Line Kit reliably delivers fuel to your Mercury engine and provides the ultimate in performance, safety, and value. The kit comes with a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C.Features:
These Attwood Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and engine end hose fitting 8896LP6
It also includes a multi-layer low-permeation primer bulb and a Fuel Demand Value that eliminates engine flooding and spillage by preventing pressurized fuel from reaching the engine.
Hose and tank fittings come with pre-applied thread sealant
For Mercury engines and tanks
Tank Side: Universal Sprayless Quick-Connect
*This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines Specifications:
ID Diameter (inches): 3/8"
Length (Feet): 6'
Box Dimensions: 3"H x 9"W x 13"L WT: 1.3 lbs
UPC: 022697938244
Quick Guide (pdf)
Universal Fuel Line Kit - 3/8" Diameter x 6' LengthThis Attwood Fuel Line Kit is a reliable universal replacement for the original equipment on any brand of engines and tanks. This kit includes a 6-foot-long, 3/8-In. diameter fuel line and a multi-layer, low-permeation primer bulb. Features:
3/8" x 6' Low Permeation Hose
Universal for any engines and tanks
Multi-layer low-permeation primer bulb with 60% more fuel output compared to competitors
Reliably delivers fuel to your engine
*Does not include fittings for the tank end and for the engine end Specifications:
ID Diameter (inches): 3/8"
Length (Feet): 6'
Box Dimensions: 3"H x 8"W x 12"L WT: 0.8 lbs
UPC: 022697938060
Quick Guide (pdf)
Universal Fuel Line Kit - 3/8" Diameter x 6' Length with Sprayless Connectors & Fuel Demand ValveThis EPA-certified Attwood Universal Fuel Line Kit reliably delivers fuel to your engine and provides the ultimate in performance, safety, and value. The kit includes a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C. Award-winning Universal Sprayless Connector (hose and tank fittings with pre-applied thread sealant) are included as well. Features:
These Attwood Fittings Are Included: Tank fitting 8838TM6 & tank end hose fitting 8838HF6
Also, includes a Fuel Demand Value that eliminates engine flooding and spillage by preventing pressurized fuel from reaching the engineTank Side: Universal Sprayless Quick-Connect
Universal for any Engines and Tanks
This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines
There’s also a multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance
*It does not include an engine fitting Specifications:
ID Diameter (inches): 3/8"
Length (Feet): 6'
Box Dimensions: 3"H x 9"W x 13"L WT: 1.3 lbs
UPC: 022697938275
Quick Guide (pdf)
Universal Fuel Line Kit - 5/16" Diameter x 6' LengthThis EPA-certified Attwood Universal Fuel Line Kit reliably delivers fuel to your engine and provides the ultimate in performance, safety, and value. The kit includes a 6-foot-long, 5/16-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C. There’s also a multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance.Features:
This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines.
Universal for any engines and tanks
Multi-Layer, Low-Permeation Primer Bulb
6 ft. x 5/16 in. Low Permeation Hose
Reliably delivers fuel to your engine
*No end fittings included Specifications:
ID Diameter (inches): 5/16"
Length (Feet): 6'
Box Dimensions: 3"H x 8"W x 12"L WT: 1.1 lbs
UPC: 022697951601
Quick Guide (pdf)
Universal Sprayless Connector - Hose Female (5/16"-3/8")This Attwood Universal Sprayless Connector reliably eliminates fuel spraying when you are connecting and disconnecting fuel hoses during fueling or maintenance. This connector replaces a traditional fitting and its high-strength body is engineered to withstand the rigors of a marine environment. Features:
Female hose fitting compatible with 3/8" and 5/16" fuel lines
Includes check valves that automatically close upon disconnecting
High fuel flow fitting (less than .25kPa restriction at 50 liters/hour)
Reliably eliminates fuel spraying when connecting and disconnecting the fuel hose
*Compatible with Ethanol blended fuels and all OEM-brand engines Quick Guide (pdf)
Universal Sprayless Connector - Male & FemaleSafely eliminate dangerous spraying of fuel when connecting or disconnecting pressurized hoses during fueling or maintenance. Comes complete with a thread-sealer for fast, easy installation; no additional supplies are required.Features:
8838HF6 Female Hose Fitting and 8838TM6 Male Threaded Tank Fitting
Pre-applied fuel-grade thread sealant prevents fuel leaks
Include check valves that automatically close upon disconnecting
High fuel flow fitting (less than .25kPa restriction at 50 liters/hour)
Compatible with Ethanol blended fuels
High-strength body engineered to withstand tough marine environments
Pre-applied fuel-grade thread sealant prevents leaks and saves you time
Compatible with 3/8 inch fuel lines, Ethanol blended fuels, and all original equipment manufacturer (OEM) brand engines
Can be used with portable generators and other portable fuel tanks
*Meets all EPA and CARB (California Air Resources Board) requirements
Primer Bulb - 1/4" Inner Diameter HoseThis Atwood Primer Bulb is engineered and constructed to deliver the most reliable priming and long-term leak-free performance. The exclusive three-layer construction prevents collapse under vacuum and prevents ballooning or bursting under pressure. The low-permeation material prevents fuel evaporation, and this bulb delivers 60 percent more output per pump than leading competitors.Features:
It is intended for use with a 1/4-inch interior diameter hose
Exclusive high-efficiency check-valves deliver faster priming and low fuel restriction (less than 1kPa restriction at 50 liters/hour)
Engineered hose barbs and stainless steel stepless clamps ensure leak-free performance
This bulb is compatible with Ethanol blended fuels, and it is EPA and CARB certified
Specifications:
ID Diameter (inches): 1/4"
Box Dimensions: 2"H x 4"W x 5"L WT: 0.3 lbs
UPC: 022697931474
Primer Bulb - 5/16" Inner Diameter HoseThis Atwood Primer Bulb is engineered and constructed to deliver the most reliable priming and long-term leak-free performance. The exclusive three-layer construction prevents collapse under vacuum and prevents ballooning or bursting under pressure. The low-permeation material prevents fuel evaporation, and this bulb delivers 60 percent more output per pump than leading competitors.Features:
It is intended for use with a 5/16-inch interior diameter hose
Exclusive high-efficiency check-valves deliver faster priming and low fuel restriction (less than 1kPa restriction at 50 liters/hour)
Engineered hose barbs and stainless steel stepless clamps ensure leak-free performance
This bulb is compatible with Ethanol blended fuels, and it is EPA and CARB certified
Specifications:
ID Diameter (inches): 5/16"
Box Dimensions: 5"H x 5"W x 5"L WT: 0.55 lbs
UPC: 022697935168
Quick Guide (pdf)
Primer Bulb - 3/8" Inner Diameter HoseThis Atwood Primer Bulb is engineered and constructed to deliver the most reliable priming and long-term leak-free performance. The exclusive three-layer construction prevents collapse under vacuum and prevents ballooning or bursting under pressure. The low-permeation material prevents fuel evaporation, and this bulb delivers 60 percent more output per pump than leading competitors.Features:
It is intended for use with a 3/8-inch interior diameter hose
Exclusive high-efficiency check-valves deliver faster priming and low fuel restriction (less than 1kPa restriction at 50 liters/hour)
Engineered hose barbs and stainless steel stepless clamps ensure leak-free performance
This bulb is compatible with Ethanol blended fuels, and it is EPA and CARB certified
Specifications:
ID Diameter (inches): 3/8"
Box Dimensions: 3"H x 5"W x 7"L WT: 1.3 lbs
UPC: 022697930385
Quick Guide (pdf)
Blue LED Micro Light with Stainless Steel Bezel & Vertical MountThis Attwood LED Micro Light is a compact and versatile light source that can be installed in numerous locations. Each one delivers industry-leading light output from an extremely compact package. The electropolished stainless steel cover adds an appealing bright finish to a boat, and this light is durable with its fully sealed electronics. It will endure and perform in the harshest conditions, and it can be used in locations such as rod storage boxes without risk of water damage. It can also be mounted under a hardtop or to a rail. Features:
0.66-watt draw at 12 volts DC
Blue LEDs
Rated for 50,000+ hours of use
Specifications:
Bulb Type: LED
Housing: Stainless
LED Color: Blue
Voltage - Input Range (Volts): 12v
Box Dimensions: 1"H x 4"W x 5"L WT: 0.1 lbs
UPC: 022697263506
Quick Guide (pdf)
White LED Micro Light with Stainless Steel Bezel & Vertical MountThis Attwood LED Micro Light is a compact and versatile light source that can be installed in numerous locations. Each one delivers industry-leading light output from an extremely compact package. The electropolished stainless steel cover adds an appealing bright finish to a boat, and this light is durable with its fully sealed electronics. It will endure and perform in the harshest conditions, and it can be used in locations such as rod storage boxes without risk of water damage. It can also be mounted under a hardtop or to a rail. Features:
0.66-watt draw at 12 volts DC
White LEDs
Rated for 50,000+ hours of use
Specifications:
Bulb Type: LED
Housing: Stainless
LED Color: White
Voltage - Input Range (Volts): 12v
Box Dimensions: 1"H x 4"W x 5"L WT: 0.1 lbs
UPC: 022697463500
Quick Guide (pdf)
