500 GPH Shower Sump MK2 System - 12VAttwood’s shower sump systems deliver the performance you’ve been asking for. Choose from standard or large box sizes. They offer fast water flow into and out of the sump. The lid snaps into place to allow quick installation (and removal for cleaning) and includes a gasket to seal the sump box against overflow. The sump box even includes an air vent to prevent airlocks. It meets or exceeds all applicable standards of the ABYC and USCG.Specifications:
Amp Draw: 1.4
500 GPH
Rated Voltage: 12V
Fuse Size: 3A
Outlet Hose Size: 3/4" I.D.
Wire/Connector: 22" wire
800 GPH Shower Sump MK2 System - 12VAttwood’s shower sump systems deliver the performance you’ve been asking for. Choose from standard or large box sizes. They offer fast water flow into and out of the sump. The lid snaps into place to allow quick installation (and removal for cleaning) and includes a gasket to seal the sump box against overflow. The sump box even includes an air vent to prevent airlocks. It meets or exceeds all applicable standards of the ABYC and USCG.Specifications:
800 GPH
Amp Draw: 2.5
Rated Voltage: 12V
Fuse Size: 5A
Outlet Hose Size: 3/4" I.D.
Wire/Connector: 22" wire
Tsunami MK2 T500 Manual Bilge Pump with Installation Kit - 500 GPH & 12VThis is a complete kit (includes a bilge pump) to install a manual bilge pump with a 3/4" I.D. hose outlet. The Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump. Kit Includes:
Attwood Tsunami Mk2 500 GPH Pump
Washer / Non-Return Valve
90-degree Outlet
Straight Outlet
3/4" x 5' Pump Hose
3/4" Thru-hull fitting
2-way on/off switch with bezel plate
Snap-It hose clamps
Wire Kit
Installation Kit
Easy Installation & Service:
GPH (Gallons Per Hour): 500 GPH
90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation
Backward compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps
External mounting feet and integrated outlets reduce time and effort
Service pump cartridges from hard-to-reach areas using only one hand
Specifications:
Rated Volts DC: 12VDC
Fuse Size: 3 AMP
Wire Length: (inch) 29" / (mm) 735mm
Hose Diameter: (inch) 3/4" and 1"
*Caution: Bilge pump switches are not external ignition protected Specifications:
Gallons Per Hour: 500 GPH
Operation: Non-Automatic
Outlet Size: 3/4" or 1"
Type: Pumps/Drives
Volts: 12v
Box Dimensions: 6"H x 7"W x 9"L WT: 1.75 lbs
UPC: 022697024213
Quick Guide (pdf)
Kayak Hand Bilge Pump This Attwood Hand-Operated Bilge Pump quickly and safely removes unwanted water and other liquids from small craft such as kayaks, canoes, and small fishing boats. This pump can remove up to 8 gallons per minute, and no hose is required. The pump is an 18-inch-long pump and has an ergonomic hand grip that keeps the pump afloat if dropped into the water.Features:
Ideal for small craft such as kayaks, canoes, and small fishing boats
(inch) 18" long
Sturdy, impact-resistant, and lightweight plastic construction
*No hose is required Specifications:
Gallons Per Minute: 8
Operation: Non-Automatic
Box Dimensions: 4"H x 4"W x 21"L WT: 3.7 lbs
UPC: 022697115959
Tsunami MK2 Manual Bilge Pump - T1200 - 1200 GPH & 24VThe Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump.Easy Installation & Service
GPH (Gallons Per Hour): 1200
90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation
Backward compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps
External mounting feet and integrated outlet reduces time and effort
Service pump cartridges from hard-to-reach areas using only one hand
Specifications:
Rated Volts DC: 24V
Fuse Size: 2 Amp
Wire Length: (inch) 29" / (mm) 735
Hose Diameter: (inch) 1" and 1-1/8"
*Must be used with appropriate Tsunami outlet Specifications:
Gallons Per Hour: 1200 GPH
Gallons Per Minute: 20
Operation: Non-Automatic
Outlet Size: 1" or 1-1/8"
Type: Pumps/Drives
Volts: 24v
Box Dimensions: 4"H x 5"W x 7"L WT: 1.2 lbs
UPC: 022697024190
Quick Guide (pdf)
Tsunami MK2 Manual Bilge Pump - T1200 - 1200 GPH & 12VThe Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump.Easy Installation & Service
GPH (Gallons Per Hour): 1200
90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation
Backward compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps
External mounting feet and integrated outlet reduces time and effort
Service pump cartridges from hard-to-reach areas using only one hand
Specifications:
Rated Volts DC: 12V
Fuse Size: 5 Amp
Wire Length: (inch) 29" / (mm) 735
Hose Diameter: (inch) 1" and 1-1/8"
*Must be used with appropriate Tsunami outlet Specifications:
Gallons Per Hour: 1200 GPH
Gallons Per Minute: 20
Operation: Non-Automatic
Outlet Size: 1" or 1-1/8"
Type: Pumps/Drives
Volts: 12v
Box Dimensions: 4"H x 5"W x 7"L WT: 1.25 lbs
UPC: 022697024152
Quick Guide (pdf)
HD2000 Heavy Duty Bilge Pump - 24V & 2000 GPHHeavy-Duty Blige Pumps integrate the highest quality bearings, brushes, alloys, and magnets designed to withstand extreme usage cycles. The pump also employs an exclusive shaft and motor compartment, reducing wear and significantly extending pump life. Advanced resin compositions are incorporated in the exterior to resist chemicals such as engine oil, aggressive detergents, and hose plasticizers. Attwood’s Heavy Duty bilge has unsurpassed durability and efficiency in a compact design to ensure electrical energy is converted to the pump rather than excess heat. Attwood's highest capacity pump, the ball-bearing design provides for cooler motor operation and longer life. Also, this pump delivers over 2000 GPH at open flow while drawing less than 7-amps.Features:
High-quality bearings, brushes, alloys, and magnets
Advanced resin compositions incorporated into the exterior
Specifications:
Rated Voltage: 24
Fuse Size: 7 Amp
Hose Size: (inch) 1-1/8" inner diameter
Specifications:
Gallons Per Hour: 2000 GPH
Operation: Non-Automatic
Outlet Size: 1-1/8"
Type: Pumps/Drives
Volts: 24v
Box Dimensions: 6"H x 6"W x 7"L WT: 2.4 lbs
UPC: 022697477040
Quick Guide (pdf)
Tsunami MK2 Manual Bilge Pump - T800 - 800 GPH & 12VThe Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump.Easy Installation & Service
GPH (Gallons Per Hour): 800
90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation
Backward compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps
External mounting feet and integrated outlet reduces time and effort
Service pump cartridges from hard-to-reach areas using only one hand
Specifications:
Rated Volts DC: 12V
Fuse Size: 4 Amp
Wire Length: (inch) 29" / (mm) 735
Hose Diameter: (inch) 3/4" and 1"
*Must be used with appropriate Tsunami outlet Specifications:
Gallons Per Hour: 800 GPH
Operation: Non-Automatic
Outlet Size: 3/4" or 1"
Type: Pumps/Drives
Volts: 12v
Box Dimensions: 4"H x 5"W x 7"L WT: 1.2 lbs
UPC: 022697023988
Quick Guide (pdf)
Tsunami MK2 Manual Bilge Pump - T800 - 800 GPH & 24VThe Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump.Easy Installation & Service
GPH (Gallons Per Hour): 800
90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation
Backward compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps
External mounting feet and integrated outlet reduces time and effort
Service pump cartridges from hard-to-reach areas using only one hand
Specifications:
Rated Volts DC: 24V
Fuse Size: 2 Amp
Wire Length: (inch) 29" / (mm) 735
Hose Diameter: (inch) 3/4" and 1"
*Must be used with appropriate Tsunami outlet Specifications:
Gallons Per Hour: 800 GPH
Operation: Non-Automatic
Outlet Size: 3/4" or 1"
Type: Pumps/Drives
Volts: 24v
Box Dimensions: 4"H x 5"W x 7"L WT: 1.2 lbs
UPC: 022697024121
Quick Guide (pdf)
Tsunami MK2 Manual Bilge Pump - T500 - 500 GPH & 12VThe Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump.Easy Installation & Service
GPH (Gallons Per Hour): 500
90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation
Backward compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps
External mounting feet and integrated outlet reduces time and effort
Service pump cartridges from hard-to-reach areas using only one hand
Specifications:
Rated Volts DC: 12V
Fuse Size: 3 Amp
Wire Length: (inch) 29" / (mm) 735
Hose Diameter: (inch) 3/4" and 1"
*Must be used with appropriate Tsunami outlet Specifications:
Gallons Per Hour: 500 GPH
Operation: Non-Automatic
Outlet Size: 3/4" or 1"
Type: Pumps/Drives
Volts: 12v
Box Dimensions: 4"H x 6"W x 7"L WT: 0.8 lbs
UPC: 022697023971
Quick Guide (pdf)
Replacement Cartridge for Tsunami 1200 MK21200 GPH Replacement Attwood Tsunami motor cartridge. For use with Attwood Tsunami MK2 (56 series) Bilge and Aerator pumps. Attwood Tsunami MK2 motor cartridge eliminates air locks.Features:
1200 GPH Replacement Attwood Tsunami motor cartridge
For use with Attwood Tsunami MK2 (56 series) Bilge and Aerator pump
Attwood Tsunami MK2 motor cartridge eliminates air locks
Sahara MK2 S800 Bilge Pump 800 GPH - 12V - AutomaticEngineered for extended service life, these pumps feature a cool-running design and quality components, including permanent magnet motors, stainless steel shafts, and steel-reinforced seals.Features:
Sahara Mk2 is the only automatic bilge pump that eliminates air-locks
Patented X-Air™ Impeller ejects trapped air in the pump and pipework.
Sahara Mk2 is the easiest automatic bilge pump to install and service
External mounting feet and integrated outlet reduces time and effort.
Universal mounting pattern makes replacement simple.
Service pump cartridge from hard-to-reach areas using only one hand.
Sahara Mk2 is the most reliable automatic bilge pump in freshwater and saltwater applications
Attwood’s SteadySwitch™ reduces cycling and extends the life of the pump.
40% better protection against water ingress and electrolysis - vs. MK1.
2X better protection against water ingress and electrolysis - than the leading competition.
Universal mounting patterns make it backwards compatible with the most popular bilge pumps on the market.
Specifications:
Type: Pumps/Drives
Outlet Size: 3/4" or 1"
Operation: Automatic
Volts: 12v
Gallons Per Hour: 800 GPH
Box Dimensions: 4"H x 6"W x 7"L WT: 1.35 lbs
UPC: 022697023469
Owner's Manual (pdf)Brochure (pdf)
Sahara MK2 S1200 Bilge Pump 1200 GPH - 24V - AutomaticEngineered for extended service life, these pumps feature a cool-running design and quality components, including permanent magnet motors, stainless steel shafts, and steel-reinforced seals.Features:
Sahara Mk2 is the only automatic bilge pump that eliminates air-locks
Patented X-Air™ Impeller ejects trapped air in the pump and pipework.
Sahara Mk2 is the easiest automatic bilge pump to install and service
External mounting feet and integrated outlet reduces time and effort.
Universal mounting pattern makes replacement simple.
Service pump cartridge from hard-to-reach areas using only one hand.
Sahara Mk2 is the most reliable automatic bilge pump in freshwater and saltwater applications
Attwood’s SteadySwitch™ reduces cycling and extends the life of the pump.
40% better protection against water ingress and electrolysis - vs. MK1.
2X better protection against water ingress and electrolysis - than the leading competition.
Universal mounting patterns make it backwards compatible with the most popular bilge pumps on the market.
Specifications:
Volts: 24v
Type: Pumps/Drives
Gallons Per Hour: 1200 GPH
Operation: Automatic
Outlet Size: 1" or 1-1/8"
Box Dimensions: 4"H x 6"W x 7"L WT: 1.35 lbs
UPC: 022697023490
Owner's Manual (pdf)Brochure (pdf)
Sahara MK2 S1200 Bilge Pump 1200 GPH - 12V - AutomaticEngineered for extended service life, these pumps feature a cool-running design and quality components, including permanent magnet motors, stainless steel shafts, and steel-reinforced seals.Features:
Sahara Mk2 is the only automatic bilge pump that eliminates air-locks
Patented X-Air™ Impeller ejects trapped air in the pump and pipework.
Sahara Mk2 is the easiest automatic bilge pump to install and service
External mounting feet and integrated outlet reduces time and effort.
Universal mounting pattern makes replacement simple.
Service pump cartridge from hard-to-reach areas using only one hand.
Sahara Mk2 is the most reliable automatic bilge pump in freshwater and saltwater applications
Attwood’s SteadySwitch™ reduces cycling and extends the life of the pump.
40% better protection against water ingress and electrolysis - vs. MK1.
2X better protection against water ingress and electrolysis - than the leading competition.
Universal mounting patterns make it backwards compatible with the most popular bilge pumps on the market.
Specifications:
Gallons Per Hour: 1200 GPH
Operation: Automatic
Outlet Size: 1" or 1-1/8"
Volts: 12v
Type: Pumps/Drives
Box Dimensions: 4"H x 6"W x 7"L WT: 1.35 lbs
UPC: 022697023483
Owner's Manual (pdf)Brochure (pdf)
Sahara MK2 S800 Bilge Pump 800 GPH - 24V - AutomaticEngineered for extended service life, these pumps feature a cool-running design and quality components, including permanent magnet motors, stainless steel shafts, and steel-reinforced seals.Features:
Sahara Mk2 is the only automatic bilge pump that eliminates air-locks
Patented X-Air™ Impeller ejects trapped air in the pump and pipework.
Sahara Mk2 is the easiest automatic bilge pump to install and service
External mounting feet and integrated outlet reduces time and effort.
Universal mounting pattern makes replacement simple.
Service pump cartridge from hard-to-reach areas using only one hand.
Sahara Mk2 is the most reliable automatic bilge pump in freshwater and saltwater applications
Attwood’s SteadySwitch™ reduces cycling and extends the life of the pump.
40% better protection against water ingress and electrolysis - vs. MK1.
2X better protection against water ingress and electrolysis - than the leading competition.
Universal mounting patterns make it backwards compatible with the most popular bilge pumps on the market.
Specifications:
Volts: 24v
Type: Pumps/Drives
Outlet Size: 3/4" or 1"
Operation: Automatic
Gallons Per Hour: 800 GPH
Box Dimensions: 2"H x 4"W x 8"L WT: 1.5 lbs
UPC: 022697023476
Owner's Manual (pdf)Brochure (pdf)
Sahara MK2 S500 Bilge Pump 500 GPH - 12V - AutomaticEngineered for extended service life, these pumps feature a cool-running design and quality components, including permanent magnet motors, stainless steel shafts, and steel-reinforced seals.Features:
Sahara Mk2 is the only automatic bilge pump that eliminates air-locks
Patented X-Air™ Impeller ejects trapped air in the pump and pipework.
Sahara Mk2 is the easiest automatic bilge pump to install and service
External mounting feet and integrated outlet reduces time and effort.
Universal mounting pattern makes replacement simple.
Service pump cartridge from hard-to-reach areas using only one hand.
Sahara Mk2 is the most reliable automatic bilge pump in freshwater and saltwater applications
Attwood’s SteadySwitch™ reduces cycling and extends the life of the pump.
40% better protection against water ingress and electrolysis - vs. MK1.
2X better protection against water ingress and electrolysis - than the leading competition.
Universal mounting patterns make it backwards compatible with the most popular bilge pumps on the market.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Type: Pumps/Drives
Outlet Size: 3/4" or 1"
Operation: Automatic
Volts: 12v
Gallons Per Hour: 500 GPH
Box Dimensions: 4"H x 6"W x 7"L WT: 1.25 lbs
UPC: 022697023452
Owner's Manual (pdf)Brochure (pdf)
WaterBuster® Portable PumpPart #: 4140-4This patented, submersible pump is a great way to remove unwanted water from boats, pool covers, aquariums and sump pits. Convenient and safe, too, because it needs no electrical cord - runs up to 5 hours on three alkaline D batteries. Excellent for use as a portable pump-out device for paddle boats, inflatables, duck boats, dingies and kayaks. Any craft that lacks a hard-wire, permenent electrical system.Features:
6-3/8" high x 5-1/4"
Pumps up to 200 gallons per hour
Includes 42" hose with garden-hose adapter for adding longer hose
Lifts water to height of 40
Note: Not to be used as a permanent bilge pump. Specifications:
Gallons Per Hour: 200 GPH
Type: Electric
Box Dimensions: 6"H x 6"W x 7"L WT: 2.2 lbs
UPC: 022697414045
Quick Guide (pdf)
3-Way Auto/Off/Manual Bilge Pump SwitchPart #: 7615A3Panel-mounted rocker switches for use with pump that draws 10 amps or less.Features:
1/4" spade terminals
6-volt through 32-volt D.C. only
10 amps maximum
Plate is 2-13/16" x 1-7/8"
Hole size is 1-1/2" x 7/8"
Caution: Bilge pump switches are not external ignition protected.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Volts: 12/24v
Type: Switches
Box Dimensions: 1"H x 3"W x 5"L WT: 0.1 lbs
UPC: 022697761590
Quick Guide (pdf)
Automatic Bilge Switch S3 SeriesPart #: 4801-7Incorporates a proprietary Electronic Sensing technology to detect bilge water levels and trigger pump activation and has been engineered to operate in any bilge water mixture consistently without failure. Your pump won't be exposed to continuous cycling as the S3 switch can easily distinguish splashing bilge water, chemicals, sludge build up or foam and comes equipped with fully sealed electronics that are completely protected from water or chemical damage. For added convenience, the bilge switch can be mounted on the floor of the bilge directly to a stringer wall or alongside the basket of the pump without added components or brackets. The S3 Series switch is also directly compatible with all competitive products and free of moving parts that can jam up, break or wear out over time.Features:
12V
15 Amp
36" Wire
5-Year Warranty
Specifications:
Volts: 12v
Type: Switches
Box Dimensions: 2"H x 3"W x 7"L WT: 0.4 lbs
UPC: 022697048011
Quick Guide (pdf)Brochure (pdf)
Float SwitchPart #: 4202-7Converts bilge pumps to fully automatic operation. Maximum amp draw is 12 amps (at 12-volt D.C.) or 6-amps (at 24-Volts D.C.). Features a compact, low profile design that mounts on any surface from a horizontal up to a 24x angle. Incorporates a reliable and affordable mechanical switch that actuates pump motor at 2" water level. Wire leads do not flex or hinge with the float as on some competitive models. Integral cover dampens bilge sloshing to reduce pump cycling, and prevents debris interference. Sealed switch mechanism resists moisture, fume-ignition, and electrical shock. Contains no mercury, which is listed as a health hazard and "Persistent Toxic Substance" in over 26 states.Float switch installs directly onto the rear slots of the V-Series pump bracket. Features a convenient test knob to test pump operation.Features:
36" Wire
12V & 24V
CE Rated
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Volts: 12/24v
Type: Switches
Box Dimensions: 3"H x 6"W x 9"L WT: 0.4 lbs
UPC: 022697420275
Quick Guide (pdf)
Heavy-Duty Bilge Pump 2000 SeriesPart #: 4760-4Heavy-Duty Blige Pumps integrate the highest quality bearings, brushes, alloys and magnets designed to withstand extreme usage cycles. Pump all employs an exclusive shaft and motor compartment, reducing wear and significantly extending pump life. Advanced resin compositions incorporated in exterior to resist chemicals such as engine oil, aggressive detergents and hose plasticizers. Attwood's Heavy Duty bilge has unsurpassed durability and efficiency in a compact design to ensure electrical energy is converted to the pump rather than excess heat.Attwood's highest capacity pump! Ball-bearing design provides for cooler motor operation and longer life, Delivers over 2000 GPH at open flow while drawing less than 7-amps.Features:
12V
CE Rated
36" Wire
3-Year Warranty
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Gallons Per Hour: 2000 GPH
Operation: Non-Automatic
Outlet Size: 1-1/8"
Volts: 12v
Type: Electric
Box Dimensions: 6"H x 7"W x 7"L WT: 2.4 lbs
UPC: 022697476043
Quick Guide (pdf)Brochure (pdf)
Float Switch w/CoverPart #: 4201-7Converts bilge pumps to fully automatic operation. Maximum amp draw is 12 amps (at 12-volt D.C.) or 6-amps (at 24-Volts D.C.). Features a compact, low profile design that mounts on any surface from a horizontal up to a 24" angle. Incorporates a reliable and affordable mechanical switch that actuates pump motor at 2" water level. Wire leads do not flex or hinge with the float as on some competitive models. Integral cover dampens bilge sloshing to reduce pump cycling, and prevents debris interference. Sealed switch mechanism resists moisture, fume-ignition, and electrical shock. Contains no mercury, which is listed as a health hazard and "Persistent Toxic Substance" in over 26 states.Float switch installs independently or directly onto the rear slots of the V-Series pump bracket. Features a convenient test knob to test pump operation.Features:
36" Wire
12V and 24V
CE Rated
Includes Cover
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Volts: 12/24v
Type: Switches
Box Dimensions: 2"H x 6"W x 9"L WT: 0.5 lbs
UPC: 022697420176
Quick Guide (pdf)
Heavy-Duty Bilge Pump 1700 SeriesPart #: 4730-4Heavy-Duty Bilge Pumps integrate the highest quality bearings, brushes, alloys and magnets designed to withstand extreme usage cycles. Pump all employs an exclusive shaft and motor compartment, reducing wear and significantly extending pump life. Advanced resin compositions incorporated in exterior to resist chemicals such as engine oil, aggressive detergents and hose plasticizers. Attwood's Heavy Duty bilge has unsurpassed durability and efficiency in a compact design to ensure electrical energy is converted to the pump rather than excess heat.The perfect upgrade from 1500 GPH rated pumps especially older and over-rated designs. Easily replaces 2000 GPH rated pumps. Delivers a true 1700 GPH at open flow while drawing less than 6-amps.Features:
12V
CE Rated
36" Wire
3-Year Warranty
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Gallons Per Hour: 1700 GPH
Operation: Non-Automatic
Outlet Size: 1-1/8"
Volts: 12v
Type: Electric
Box Dimensions: 6"H x 6"W x 7"L WT: 2.4 lbs
UPC: 022697437044
Quick Guide (pdf)Brochure (pdf)
