Stainless Steel Scupper Valve Barbed - 1-1/2" Hose SizePolish your image with these beautiful, durable stainless steel fittings. Why specify plastic parts when these fittings will last the life of the boat?Rugged Stainless Construction:
Cast from certified Enhanced 316 Stainless Steel alloy for strength and lifetime corrosion-resistance
All visible areas are polished to a mirror finish, then passivate each part for additional protection
Thick steel sidewalls withstand continual stress and hose flexing
Faster, Simpler Installation:
Each Scupper Valve is available with a new silicone gasket
A channel under the flange holds a bead of sealant, making it easier to apply a trouble-free seal
All models have wrench flats or an end notch to hold as a gripping surface; one installer can tighten all connections from inside the hull
The barbed tail ends provide plenty of room to hold multiple clamps
Stainless Steel Scupper Valves, Barbed:
The Scupper Flap is tough neoprene rubber with a molded V that fits into the grooved body to reduce backwash
Fasteners are concealed and corrosion-proof
Specifications:
Hose size: (inch) 1-1/2" inner diameter
Thread Diameter: (inch) 1-7/8"
Flange O.D. (outside diameter): (inch) 3"
Thread Length: (inch) 3-1/2"
Barb Length: (inch) 1-1/2"
Total Length: (inch) 5-1/2"
Install Hole Saw Size: (inch) 2"
Thread NPSM: (inch) 1-1/2"
Max Hull Thickness: (inch) 3"
*Stainless Steel Thru-Hull Connectors are designed for installation above the water line only Specifications:
Hose Size: 1-1/4"
Material: Stainless Steel
Box Dimensions: 3"H x 3"W x 6"L WT: 3 lbs
UPC: 022697665539
Quick Guide (pdf)
Stainless Steel Thru-Hull Standard Straight Barbed - 1-1/8" Inner DiameterPolish your image with these beautiful, durable stainless steel fittings. Why specify plastic parts when these fittings will last the life of the boat?Rugged Stainless Construction:
Cast from certified Enhanced 316 Stainless Steel alloy for strength and lifetime corrosion-resistance
All visible areas are polished to a mirror finish, then passivate each part for additional protection
Thick steel sidewalls withstand continual stress and hose flexing
Faster, Simpler Installation:
Each Thru-Hull is available with a new silicone gasket
A channel under the flange holds a bead of sealant, making it easier to apply a trouble-free seal
All models have wrench flats or an end notch to hold as a gripping surface; one installer can tighten all connections from inside the hull
The barbed tail ends provide plenty of room to hold multiple clamps
Stainless Steel Straight Thru-Hulls, BarbedStandard Thread model has a full-length thread for thick hulls and easy tighteningSpecifications:
Hose size: (inch) 1-1/8" inner diameter
Flange Diameter: (inch) 2-1/4"
Thread O.D. (outside diameter): (inch) 1-3/8"
Thread Length: (inch) 2-3/8"
Barb Length: (inch) 1-1/4"
Total Length: (inch) 3-7/8"
Install Hole Saw Size: (inch) 1-1/4"
Thread NPSM: (inch) 1"
Max Hull Thickness: (inch) 1-3/4"
*Stainless Steel Thru-Hull Connectors are designed for installation above the water line only Specifications:
Hose Size: 1-1/8"
Material: Stainless Steel
Box Dimensions: 2"H x 4"W x 7"L WT: 0.85 lbs
UPC: 022697665492
Quick Guide (pdf)
90-Degree Cockpit Scupper Drain - WhiteThis cockpit scupper drain is an affordable and durable solution for draining areas below the waterline. Made from high-strength, UV-stabilized polymer, it features a check ball for effective sealing against reverse water flow and an optional leaf guard to prevent clogging.This cockpit scupper drain provides an inexpensive alternative to items currently available for draining areas where the discharge is below the waterline. This injection-molded part is high-strength and UV-stabilized to provide value and durability. The check ball contained inside the cockpit scupper drain is molded and then ground smooth and round to provide better sealing against reverse water flow that occurs when backing the boat. The leaf guard model has raised ribs on the head to prevent debris (leaves, scales, etc.) from clogging holes.The overall diameter of the mounting flange is 3 9/16". The cockpit scupper drain requires a 2 1/2" diameter hole for installation and mounts with four (4) number 8 screws (not furnished). The top of the cockpit scupper drain is removable for cleaning. All outlets fit 1 1/2 inch drain hoses.Features:
Check the ball inside to prevent water from backing up
Made of high-strength, UV-stabilized polymer
Removable top screen for easy cleaning
An optional leaf guard prevents debris from clogging
Fits standard 1-1/2" drain hoses
Specifications:
90-Degree Outlet
1-1/2" Hose Diameter
Color: White
Specifications:
Hose Size: 1-1/2"
Material: Polymer
Type: Fittings & Hoses
Box Dimensions: 4"H x 6"W x 9"L WT: 0.35 lbs
UPC: 733572034158
Cooler Saltwater Aeration SystemSpecifically designed and tested to keep saltwater baitfish healthy and active, these pumps can convert any size cooler or livewell into an oxygen-rich aquarium.Features:
Kit includes everything needed to convert a cooler into a live bait tank
Includes: aerator module, air hose, micro bubble diffuser, fittings, brackets
Effectively aerates up to 15 gallons
Power options: two D batteries, 12V adapter and 110V adapter
Gasketed housing for a water-tight design
Whisper quiet operation
Cooler not included
7.5" x 3.5" x 1.5"
Specifications:
Color: Grey
Width: 11"
Length (Inches): 11"
Height: 3"
Box Dimensions: 3"H x 11"W x 11"L WT: 1.8 lbs
UPC: 082271414373
Dual Fish Bait Bucket with Aerator Built-InFeatures more durable construction and adds a series of innovative lid designs to help you maintain the health of your bait.The Dual Bait Bucket includes a clip-on aerator (#14331) and a storage compartment built-in to the lid for worms or other bait separate from minnows.Features:
1.3 Gallon Capacity
Insulated Liner
Built-in Compartment Lid
Aerator Clip-on Bracket
Hose Hole in Lid
Lid Housed Aerator
Specifications:
Width: 1"
Length (Inches): 1"
Height: 10"
Box Dimensions: 10"H x 10"W x 10"L WT: 1.85 lbs
UPC: 082271048257
Aqua-Life™ Single Output 110V AeratorAqua-Life® Products run so quietly you'll forget you're aerating your bait. You'll know you are by the healthy condition of your bait. Aqua-Life® products feature a whisper quiet motor that runs efficiently at a low volume. Aqua-Life® products also utilize a special micro-bubble oxygen diffuser that produces clouds of tiny bubbles. Smaller more numerous bubbles mix readily as they collide and dispense through the entire water column. In bait containers, smaller bubbles are important as they are less prone to damage delicate baitfish. Each Aqua-Life® product includes the diffuser and a 30" non-kink air hose (Hoses and stones also sold separately as an accessory).Features:
Aerates up to 15 gallons
Produces close to 100% saturation of dissolved oxygen
Rubber non-marking feet
UL approved
6' power cord
Includes: 30" of flexible air hose, 2" long air stone, anti-siphon valve
Specifications:
Volts: 110v
Width: 8"
Length (Inches): 9"
Height: 4"
Box Dimensions: 4"H x 8"W x 9"L WT: 0.85 lbs
UPC: 082271214225
Gear Lube PumpThis Attwood Gear Lube Pump offers a universal fit so it can be used with the greatest number of engines. This pump is intended for use with a 32-ounce gear lube bottle, and it fits nearly any outboard or sterndrive. It comes with 1 Yamaha adapter.Features:
Fits nearly any outboard or sterndrive
Easy to install
Quick Guide (pdf)
Push-In Drain Plug for 1-1/8" Thru-Hull & All Purpose DrainsThese push-in drain plugs are used to stop water flow through drains or overflows from baitwell or livewell. Also work well as plugs for sink drains and built in cooler drains.Plugs are a perfect compliment to T-H Marine overflow drain tubes.These pvc push-in drain plugs are injection molded of marine grade PVC for a long lifespan. Plugs feature a pull tab or pull ring for easy removal. They have double seal rings to assure positive sealing. Specifications:
Construction: Polymer
Box Dimensions: 1"H x 4"W x 5"L WT: 0.1 lbs
UPC: 733572032956
Bait Box with Aerator - 8 QuartSpecifically designed and tested to keep saltwater baitfish healthy and active, these pumps can convert any size cooler or livewell into an oxygen-rich aquarium.Features:
Aerated live bait cooler
Durable insulation
Keeps bait cool and aerated
Lift-out net liner
Lid latch prevents spilling of water/bait during travel
Includes a 14331 aerator
8 quart capacity
15" x 8.5" x 8.5"
Specifications:
Width: 9"
Length (Inches): 16"
Height: 9"
Box Dimensions: 9"H x 9"W x 16"L WT: 4.1 lbs
UPC: 082271140425
Replacement Aeration StonesAir stones can become clogged with mineral deposits which hamper their performance. Keep your portable aerator operating at peak efficiency by replacing the air stone on a regular basis.Features:
High Output Air Stones quality aeration
Premium Air Hose- includes 30 of tough non-kink air hose
Includes aerator hose & 2 stones
7" x 5.5" x 1.5"
Specifications:
Width: 6"
Length (Inches): 8"
Height: 2"
Box Dimensions: 2"H x 6"W x 8"L WT: 0.15 lbs
UPC: 082271114280
Replacement Cartridge for Tsunami 1200 MK21200 GPH Replacement Attwood Tsunami motor cartridge. For use with Attwood Tsunami MK2 (56 series) Bilge and Aerator pumps. Attwood Tsunami MK2 motor cartridge eliminates air locks.Features:
1200 GPH Replacement Attwood Tsunami motor cartridge
For use with Attwood Tsunami MK2 (56 series) Bilge and Aerator pump
Attwood Tsunami MK2 motor cartridge eliminates air locks
HD2000 Heavy Duty Bilge Pump - 24V & 2000 GPHHeavy-Duty Blige Pumps integrate the highest quality bearings, brushes, alloys, and magnets designed to withstand extreme usage cycles. The pump also employs an exclusive shaft and motor compartment, reducing wear and significantly extending pump life. Advanced resin compositions are incorporated in the exterior to resist chemicals such as engine oil, aggressive detergents, and hose plasticizers. Attwood’s Heavy Duty bilge has unsurpassed durability and efficiency in a compact design to ensure electrical energy is converted to the pump rather than excess heat. Attwood's highest capacity pump, the ball-bearing design provides for cooler motor operation and longer life. Also, this pump delivers over 2000 GPH at open flow while drawing less than 7-amps.Features:
High-quality bearings, brushes, alloys, and magnets
Advanced resin compositions incorporated into the exterior
Specifications:
Rated Voltage: 24
Fuse Size: 7 Amp
Hose Size: (inch) 1-1/8" inner diameter
Specifications:
Gallons Per Hour: 2000 GPH
Operation: Non-Automatic
Outlet Size: 1-1/8"
Type: Electric
Volts: 24v
Box Dimensions: 6"H x 6"W x 7"L WT: 2.4 lbs
UPC: 022697477040
Quick Guide (pdf)
Tsunami Mk2 T1200 Aerator - 12V - Straight InletKeep bait and fish alive with the Tsunami Aerator Mk2. Attwood’s leading fish-friendly technology is making it easier to install and service while offering new installation options never provided by the Tsunami range.Features:
3-1/2" x 1-1/8" thru-hull
Flexible installation with both 90 and straight inlets and outlets
Full backward compatibility with previous Tsunami models
Faster, smarter installation with no sealant or tools is required
Specifications:Flow Gallon/Hour: 1200 Specifications:
Gallons Per Hour: 1200
Inlet Style: Straight
Volts: 12v
Box Dimensions: 4"H x 5"W x 8"L WT: 1.25 lbs
UPC: 022697025531
Stainless Steel Thru-Hull Standard Straight Barbed - 5/8" Inner DiameterPolish your image with these beautiful, durable stainless steel fittings. Why specify plastic parts when these fittings will last the life of the boat?Rugged Stainless Construction:
Cast from certified Enhanced 316 Stainless Steel alloy for strength and lifetime corrosion-resistance
All visible areas are polished to a mirror finish, then passivate each part for additional protection
Thick steel sidewalls withstand continual stress and hose flexing
Faster, Simpler Installation:
Each Thru-Hull is available with a new silicone gasket
A channel under the flange holds a bead of sealant, making it easier to apply a trouble-free seal
All models have wrench flats or an end notch to hold as a gripping surface; one installer can tighten all connections from inside the hull
The barbed tail ends provide plenty of room to hold multiple clamps
Stainless Steel Straight Thru-Hulls, BarbedStandard Thread model has a full-length thread for thick hulls and easy tighteningSpecifications:
Hose size: (inch) 5/8" inner diameter
Flange Diameter: (inch) 1-7/8"
Thread O.D. (outside diameter): (inch) 1"
Thread Length: (inch) 2"
Barb Length: (inch) 1-1/4"
Total Length: (inch) 3-3/4"
Install Hole Saw Size: (inch) 1-1/8"
Thread NPSM: (inch) 3/4"
Max Hull Thickness: (inch) 1-1/16"
*Stainless Steel Thru-Hull Connectors are designed for installation above the water line only Specifications:
Hose Size: 5/8"
Material: Stainless Steel
Box Dimensions: 2"H x 3"W x 6"L WT: 0.5 lbs
UPC: 022697665461
Quick Guide (pdf)
Stainless Steel Garboard Drain Plug - 7/8" DiameterThe Garboard Drain Plug is a threaded removable plug, which has a retention system that keeps the plug from getting lost. Features:
High-polished #316 stainless steel reduces corrosion
Large 7/8" (27mm) hole for servicing stern drives
*Gasket not included Specifications:
Construction: Stainless Steel
Box Dimensions: 2"H x 3"W x 5"L WT: 0.3 lbs
UPC: 022697075574
Quick Guide (pdf)
800 GPH Shower Sump MK2 System - 12VAttwood’s shower sump systems deliver the performance you’ve been asking for. Choose from standard or large box sizes. They offer fast water flow into and out of the sump. The lid snaps into place to allow quick installation (and removal for cleaning) and includes a gasket to seal the sump box against overflow. The sump box even includes an air vent to prevent airlocks. It meets or exceeds all applicable standards of the ABYC and USCG.Specifications:
800 GPH
Amp Draw: 2.5
Rated Voltage: 12V
Fuse Size: 5A
Outlet Hose Size: 3/4" I.D.
Wire/Connector: 22" wire
500 GPH Shower Sump MK2 System - 12VAttwood’s shower sump systems deliver the performance you’ve been asking for. Choose from standard or large box sizes. They offer fast water flow into and out of the sump. The lid snaps into place to allow quick installation (and removal for cleaning) and includes a gasket to seal the sump box against overflow. The sump box even includes an air vent to prevent airlocks. It meets or exceeds all applicable standards of the ABYC and USCG.Specifications:
Amp Draw: 1.4
500 GPH
Rated Voltage: 12V
Fuse Size: 3A
Outlet Hose Size: 3/4" I.D.
Wire/Connector: 22" wire
White Plastic 90 Degree Thru-Hull Connector - 1-1/8" Inner Diameter90° Thru-Hulls are ideal for tight installations, such as livewell overflow drains. The angled design also eliminates hose kinking.Specifications:
Fits Hose Size: (inch) 1-1/8"inner diameter
Max Hull Thickness: (inch) 1-7/8"
Flange Diameter: (inch) 2-7/16"
Installation Hole Size: (inch) 1-5/16"
Drain Plug: (inch) 7/8"
Color: White
*Plastic Thru-Hull Connectors are designed for installation above the water line only Specifications:
Hose Size: 1-1/8"
Material: Plastic
Box Dimensions: 2"H x 4"W x 7"L WT: 0.25 lbs
UPC: 022697387936
Quick Guide (pdf)
Turbo 3000 Series In-Line BlowerPart #: 1733-4The first vane axial-flow fan bilge blowers designed using aerospace technology to maximize performance. No other bilge blowers in the industry provide such powerful system output at such a low power input in a compact size.Patented in-line design - provides ventilation for engine compartments, galleys, bilges, and heads. Mounting feet allow vertical or horizontal installation in confined spaces. Install with #10 fasteners. Individual carton includes 2 tie straps. All are CE certified. 16-gauge tinned and caulked copper wire leads with optional MP1 molded rubber connectors. Improved 3" design.Features:
Nickel-plated motor can for corrosion resistance
Stiffening ribs to reduce housing distortion
Motor cap to seal wires and motor for water resistance
Five-blade fan maximize airflow and efficiency
Tabs in intake and exhaust hold ventilation hose/clamp firmly in place
Low amp draw motor for longer blower and battery life
Built-in mounting feet allow easy vertical or horizontal install
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Open Flow (CFM): 120 CFM
Volts: 12v
Box Dimensions: 4"H x 5"W x 6"L WT: 1 lbs
UPC: 022697173348
Quick Guide (pdf)Brochure (pdf)
Aeration & Lid Combo PackSpecifically designed and tested to keep saltwater baitfish healthy and active, these pumps can convert any size cooler or livewell into an oxygen-rich aquarium.Features:
Lids fit most 4.25, 5 and 6 gallon buckets
Large bait door for easy bait access
Includes 14202 aerator with hose and stone
Molded slots for bait net, tools, etc.
Aerates up to 6 gallons
Runs on two D batteries
Includes minnow dip net
13.5" x 12.5" x 3"
Specifications:
Width: 14"
Length (Inches): 14"
Height: 3"
Box Dimensions: 3"H x 14"W x 14"L WT: 1.15 lbs
UPC: 082271099099
Washdown Fitting with Shutoff ValveThis bulkhead-mounted washdown fitting is inexpensive, functional, easy to install, and rust-proof. This injection-molded plastic fitting is 2 1/4" in diameter and mounts in a 1 1/4" diameter hole with 3 countersunk screws. Features:
Black flange color
Injection-molded, UV-stabilized, and rust-proof
Standard garden hose thread outlet
The inlet fits 3/4" marine hose
Protective cap with retainer
The flange dimension is 2-1/4" OD
Installation in a 1-1/4" hole
Straight inlet configuration
Shutoff valve
Specifications:
Construction: Plastic
Box Dimensions: 4"H x 6"W x 8"L WT: 0.2 lbs
UPC: 733572012200
Service Kit for S500 & S800 Bilge PumpsSpecifications:
Outlet Diameter: 3/4" (19mm) & 1" (25mm)
Compatible with Tsunami Bilge Mk2
Kit Includes (1 each):
90-degree outlet
Straight outlet
Washer
Non-return/check valve
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Tsunami Mk2 T1200 Aerator - 12V - 90-Degree InletKeep bait and fish alive with the Tsunami Aerator Mk2. Attwood’s leading fish-friendly technology is making it easier to install and service while offering new installation options never provided by the Tsunami range.Features:
3-1/2" x 1-1/8" thru-hull
Flexible installation with both 90 and straight inlets and outlets
Full backward compatibility with previous Tsunami models
Faster, smarter installation with no sealant or tools is required
Specifications:Flow Gallon/Hour: 1200 Specifications:
Gallons Per Hour: 1200
Inlet Style: Angled
Volts: 12v
Box Dimensions: 4"H x 8"W x 9"L WT: 1.5 lbs
UPC: 022697025456
