Drain Plug And Receiver Kit - 3/4" DiameterThe Attwood Drain Plug and Receiver Kit ensures that a drain is closed properly. Features:
Molded black plastic with threaded receiver
Molded retaining strap
Includes attaching screws and elastomeric gasket for a watertight fit
Specifications:Diameter: (inch) 3/4"*Intended for use on small recreational boats and jet skis Specifications:
Construction: Plastic
Box Dimensions: 2"H x 3"W x 5"L WT: 0.2 lbs
UPC: 022697004253
Quick Guide (pdf)
Tsunami MK2 T500 Manual Bilge Pump with Installation Kit - 500 GPH & 12VThis is a complete kit (includes a bilge pump) to install a manual bilge pump with a 3/4" I.D. hose outlet. The Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump. Kit Includes:
Attwood Tsunami Mk2 500 GPH Pump
Washer / Non-Return Valve
90-degree Outlet
Straight Outlet
3/4" x 5' Pump Hose
3/4" Thru-hull fitting
2-way on/off switch with bezel plate
Snap-It hose clamps
Wire Kit
Installation Kit
Easy Installation & Service:
GPH (Gallons Per Hour): 500 GPH
90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation
Backward compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps
External mounting feet and integrated outlets reduce time and effort
Service pump cartridges from hard-to-reach areas using only one hand
Specifications:
Rated Volts DC: 12VDC
Fuse Size: 3 AMP
Wire Length: (inch) 29" / (mm) 735mm
Hose Diameter: (inch) 3/4" and 1"
*Caution: Bilge pump switches are not external ignition protected Specifications:
Gallons Per Hour: 500 GPH
Operation: Non-Automatic
Outlet Size: 3/4" or 1"
Type: Electric
Volts: 12v
Box Dimensions: 6"H x 7"W x 9"L WT: 1.75 lbs
UPC: 022697024213
Quick Guide (pdf)
Float SwitchPart #: 4202-7Converts bilge pumps to fully automatic operation. Maximum amp draw is 12 amps (at 12-volt D.C.) or 6-amps (at 24-Volts D.C.). Features a compact, low profile design that mounts on any surface from a horizontal up to a 24x angle. Incorporates a reliable and affordable mechanical switch that actuates pump motor at 2" water level. Wire leads do not flex or hinge with the float as on some competitive models. Integral cover dampens bilge sloshing to reduce pump cycling, and prevents debris interference. Sealed switch mechanism resists moisture, fume-ignition, and electrical shock. Contains no mercury, which is listed as a health hazard and "Persistent Toxic Substance" in over 26 states.Float switch installs directly onto the rear slots of the V-Series pump bracket. Features a convenient test knob to test pump operation.Features:
36" Wire
12V & 24V
CE Rated
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Volts: 12/24v
Type: Switches
Box Dimensions: 3"H x 6"W x 9"L WT: 0.4 lbs
UPC: 022697420275
Quick Guide (pdf)
Service Kit for S500 & S800 Bilge PumpsSpecifications:
Outlet Diameter: 3/4" (19mm) & 1" (25mm)
Compatible with Tsunami Bilge Mk2
Kit Includes (1 each):
90-degree outlet
Straight outlet
Washer
Non-return/check valve
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Turbo 4000 Series II In-Line BlowerPart #: 1749-4Attwood's improved Turbo 4000 Series II sets the standard for in-line blower performance. Utilizing advanced fan blade design techniques, Attwood has developed a blower system that matches air flow of existing in-line blowers at a significantly reduced noise level. The first vane axial-flow fan bilge blowers designed using aerospace technology to maximize performance. No other bilge blowers in the industry provide such powerful system output at such a low power input in a compact size.Patented in-line design - provides ventilation for engine compartments, galleys, bilges, and heads. Mounting feet allow vertical or horizontal installation in confined spaces. Install with #10 fasteners. Individual carton includes 2 tie straps. All are CE certified. 16-gauge tinned and caulked copper wire leads.Features:
Nickel-plated motor can for corrosion resistance
Stiffening ribs to reduce housing distortion
Motor cap to seal wires and motor for water resistance
Five-blade fan maximize airflow and efficiency
Tabs in intake and exhaust hold ventilation hose/clamp firmly in place
Low amp draw motor for longer blower and battery life
Built-in mounting feet allow easy vertical or horizontal install
3-Year Warranty
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Ducting: 4"
Open Flow (CFM): 200 CFM
Volts: 12v
Box Dimensions: 5"H x 5"W x 6"L WT: 1.1 lbs
UPC: 022697174949
Quick Guide (pdf)Brochure (pdf)
Large Rectangular Scupper - WhiteThis large rectangular scupper is made for quickly draining decks above the waterline. Features:
Can quickly drain decks
Made for decks above the waterline
Max. drainage for larger boats
Easily clears debris
Fits a 2 in. x 5-1/2 in. opening
Premium Aeration Micro DiffuserMineral deposits and hard water use can clog your Aqua-Life® diffuser and produce less than adequate aeration quality. Keep your Aqua-Life® aeration system running at peak efficiency by replacing hoses and oxygen diffusers on a regular basis.Features:
Micro-bubble diffuser and hose assembly
7.5" x 5.5" x 1.5"
Specifications:
Width: 6"
Length (Inches): 8"
Height: 2"
Box Dimensions: 2"H x 6"W x 8"L WT: 0.3 lbs
UPC: 082271114297
Tsunami MK2 Manual Bilge Pump - T800 - 800 GPH & 12VThe Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump.Easy Installation & Service
GPH (Gallons Per Hour): 800
90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation
Backward compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps
External mounting feet and integrated outlet reduces time and effort
Service pump cartridges from hard-to-reach areas using only one hand
Specifications:
Rated Volts DC: 12V
Fuse Size: 4 Amp
Wire Length: (inch) 29" / (mm) 735
Hose Diameter: (inch) 3/4" and 1"
*Must be used with appropriate Tsunami outlet Specifications:
Gallons Per Hour: 800 GPH
Operation: Non-Automatic
Outlet Size: 3/4" or 1"
Type: Electric
Volts: 12v
Box Dimensions: 4"H x 5"W x 7"L WT: 1.2 lbs
UPC: 022697023988
Quick Guide (pdf)
Bilge Enclosed Pump Float SwitchEnsure your boat's safety and efficiency with the T-H Marine Bilge Pump Float Switch, designed for automatic activation of your bilge pump. Built for durability in harsh conditions, this reliable float switch integrates easily into your existing system. Specifications:
Type: Switches
Box Dimensions: 3"H x 3"W x 6"L WT: 0.4 lbs
Heavy-Duty Bilge Pump 1700 SeriesPart #: 4730-4Heavy-Duty Bilge Pumps integrate the highest quality bearings, brushes, alloys and magnets designed to withstand extreme usage cycles. Pump all employs an exclusive shaft and motor compartment, reducing wear and significantly extending pump life. Advanced resin compositions incorporated in exterior to resist chemicals such as engine oil, aggressive detergents and hose plasticizers. Attwood's Heavy Duty bilge has unsurpassed durability and efficiency in a compact design to ensure electrical energy is converted to the pump rather than excess heat.The perfect upgrade from 1500 GPH rated pumps especially older and over-rated designs. Easily replaces 2000 GPH rated pumps. Delivers a true 1700 GPH at open flow while drawing less than 6-amps.Features:
12V
CE Rated
36" Wire
3-Year Warranty
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Gallons Per Hour: 1700 GPH
Operation: Non-Automatic
Outlet Size: 1-1/8"
Volts: 12v
Type: Electric
Box Dimensions: 6"H x 6"W x 7"L WT: 2.4 lbs
UPC: 022697437044
Quick Guide (pdf)Brochure (pdf)
Heavy-Duty Bilge Pump 2000 SeriesPart #: 4760-4Heavy-Duty Blige Pumps integrate the highest quality bearings, brushes, alloys and magnets designed to withstand extreme usage cycles. Pump all employs an exclusive shaft and motor compartment, reducing wear and significantly extending pump life. Advanced resin compositions incorporated in exterior to resist chemicals such as engine oil, aggressive detergents and hose plasticizers. Attwood's Heavy Duty bilge has unsurpassed durability and efficiency in a compact design to ensure electrical energy is converted to the pump rather than excess heat.Attwood's highest capacity pump! Ball-bearing design provides for cooler motor operation and longer life, Delivers over 2000 GPH at open flow while drawing less than 7-amps.Features:
12V
CE Rated
36" Wire
3-Year Warranty
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Gallons Per Hour: 2000 GPH
Operation: Non-Automatic
Outlet Size: 1-1/8"
Volts: 12v
Type: Electric
Box Dimensions: 6"H x 7"W x 7"L WT: 2.4 lbs
UPC: 022697476043
Quick Guide (pdf)Brochure (pdf)
Sahara MK2 S800 Bilge Pump 800 GPH - 24V - AutomaticEngineered for extended service life, these pumps feature a cool-running design and quality components, including permanent magnet motors, stainless steel shafts, and steel-reinforced seals.Features:
Sahara Mk2 is the only automatic bilge pump that eliminates air-locks
Patented X-Air™ Impeller ejects trapped air in the pump and pipework.
Sahara Mk2 is the easiest automatic bilge pump to install and service
External mounting feet and integrated outlet reduces time and effort.
Universal mounting pattern makes replacement simple.
Service pump cartridge from hard-to-reach areas using only one hand.
Sahara Mk2 is the most reliable automatic bilge pump in freshwater and saltwater applications
Attwood’s SteadySwitch™ reduces cycling and extends the life of the pump.
40% better protection against water ingress and electrolysis - vs. MK1.
2X better protection against water ingress and electrolysis - than the leading competition.
Universal mounting patterns make it backwards compatible with the most popular bilge pumps on the market.
Specifications:
Volts: 24v
Type: Electric
Outlet Size: 3/4" or 1"
Operation: Automatic
Gallons Per Hour: 800 GPH
Box Dimensions: 2"H x 4"W x 8"L WT: 1.5 lbs
UPC: 022697023476
Owner's Manual (pdf)Brochure (pdf)
Double Barb Inline Scupper Check Valve - 1-1/8" - BlackA great solution to provide a scupper check valve in the drain line. Allows use of standard thru-hull fittings in the cockpit and on the hull exterior. Features:
Prevents Backwash
Chemical Resistant Materials
Thermo-Plastic Flapper
Specifications:
Construction: Polymer
Box Dimensions: 4"H x 6"W x 9"L WT: 0.35 lbs
UPC: 733572065008
Aqua-Life® Aerator Dual Output 110V - Greater Than 100 GallonsAqua-Life® Products run so quietly you'll forget you are aerating your bait. You'll know you are by the healthy condition of your bait. Aqua-Life® products feature a whisper quiet motor that runs efficiently at a low volume. Aqua-Life® products also utilize a special micro-bubble oxygen diffuser that produces clouds of tiny bubbles. Smaller more numerous bubbles mix readily as they collide and dispense through the entire water column. In bait containers smaller bubbles are important as they are less prone to damage delicate baitfish. Each Aqua-Life® product includes the diffuser and a 30 inch non-kink air hose. (Hoses and stones also sold separately as an accessory.)Features:
Dual pumps-aerates 1 or 2 livewells (Up to 100 gallons)
Produces close to 100% saturation of dissolved oxygen
Rubber marking feet
UL approved
6' power cord
Includes: 10ft of flexible air hose, 2 each 3" long air stones, t-connector, 2 anti-siphon valves
Specifications:
Volts: 110v
Box Dimensions: 6"H x 10"W x 10"L WT: 2.15 lbs
UPC: 082271214218
Tsunami Mk2 T1200 Aerator - 12V - 1" NPT InletKeep bait and fish alive with the Tsunami Aerator Mk2. Attwood’s leading fish-friendly technology is making it easier to install and service while offering new installation options never provided by the Tsunami range.Features:
7/8" x 1" seacock
Flexible installation with both 90 and straight inlets and outlets
Full backward compatibility with previous Tsunami models
Faster, smarter installation with no sealant or tools is required
Specifications:Flow Gallon/Hour: 1200 Specifications:
Gallons Per Hour: 1200
Volts: 12v
Box Dimensions: 4"H x 5"W x 8"L WT: 1.2 lbs
UPC: 022697025555
HYDRA™ Livewell Pump - 1100 GPH - 12V - Long NozzleThe T-H Marine HYDRA™ Livewell Pump is engineered for consistent livewell circulation with simplified service and dual-function capability for serious anglers. Backed by 4,000 hours of testing, HYDRA delivers dependable performance through an anti-airlock design that ensures reliable restarts—even when air is present in the line.Designed for durability in harsh marine environments, the pump features a precision-balanced motor and a 316 stainless steel motor shaft to reduce vibration, noise, and corrosion over time. Stator vane technology optimizes flow efficiency, while the dual-lock cartridge design allows fast motor removal and service without disconnecting hoses or plumbing.Built with versatility in mind, the HYDRA Livewell Pump includes a secondary outlet for wash-down applications, an integrated sealant channel to prevent leaks, and both short and long threaded intake options for flexible installations. Available in 600, 800, and 1100 GPH configurations and meeting ABYC, ISO, and U.S. Coast Guard standards, HYDRA is the premium solution for reliable livewell performance.Features:
LONG: 3.5" (3/4"-14) Threaded intake tube (Hole installation size: 1-1/16")
FLOW RATE: 1100 GPH
AMP DRAW: Approx. 5A
FUSE SIZE: 6 AMP
INSTALL HOLE: 1-1/16"
ANTI-AIRLOCK DESIGN: Engineered to restart reliably, even with air in the line.
316 STAINLESS STEEL MOTOR SHAFT: Corrosion-resistant for long-term durability.
PRECISION BALANCED MOTOR: Runs smoother with reduced vibration and noise.
REMOVABLE NOZZLE: Allows quick service without disconnecting the hose.
STATOR VANE TECHNOLOGY: Optimizes flow efficiency and performance.
DUAL-LOCK CARTRIDGE: Designed for quick removal and fast service.
SECONDARY OUTLET: Dedicated outlet for wash-down pump.
SEALANT CHANNEL: Integrated to prevent leaks.
HYDRA™ Cartridge Bilge Pump - 1100 GPH - 12VThe HYDRA™ Cartridge Bilge Pump is engineered for dependable marine water removal with a service-friendly cartridge design that allows rapid motor replacement without removing the pump housing. Backed by 4,000 hours of testing, HYDRA delivers consistent performance through an advanced anti-airlock design that ensures reliable restarts—even when air is present in the line.Built for long-term durability in harsh marine environments, the HYDRA Cartridge Bilge Pump features a precision-balanced motor and a 316 stainless steel motor shaft to reduce vibration, noise, and corrosion. Stator vane technology optimizes flow efficiency, while the dual-lock cartridge system allows quick, tool-free motor removal for fast servicing on the water or at the dock.Designed with OEM-friendly installation in mind, the positive-lock strainer base matches most standard mounting patterns, and the pump includes straight and 90° outlets, a backflow restrictor, and a flat seal for flexible plumbing configurations. Available in 600 GPH, 800 GPH, and 1100 GPH options and meeting ABYC, ISO, and U.S. Coast Guard standards, the HYDRA Cartridge Bilge Pump delivers reliable performance boaters can trust.Features:
AMP DRAW: Approx. 5A
FUSE SIZE: 7.5 AMPFLOW RATE: 1100 GPH
ANTI-AIRLOCK DESIGN: Engineered to restart reliably, even with air in the line.
316 STAINLESS STEEL MOTOR SHAFT: Corrosion-resistant for long-term durability.
PRECISION BALANCED MOTOR: Runs smoother with reduced vibration and noise.
REMOVABLE NOZZLE: Allows quick service without disconnecting the hose.
STATOR VANE TECHNOLOGY: Optimizes flow efficiency and performance.
POSITIVE-LOCK STRAINER BASE: Mounting pattern matches most manufacturers.
DUAL LOCK CARTRIDGE: Designed for quick removal and fast service.
INCLUDES: Straight & 90º Outlet, Backflow Restrictor, and Flat Seal.
HYDRA™ Livewell Pump - 600 GPH - 12V - Long NozzleThe T-H Marine HYDRA™ Livewell Pump is engineered for consistent livewell circulation with simplified service and dual-function capability for serious anglers. Backed by 4,000 hours of testing, HYDRA delivers dependable performance through an anti-airlock design that ensures reliable restarts—even when air is present in the line.Designed for durability in harsh marine environments, the pump features a precision-balanced motor and a 316 stainless steel motor shaft to reduce vibration, noise, and corrosion over time. Stator vane technology optimizes flow efficiency, while the dual-lock cartridge design allows fast motor removal and service without disconnecting hoses or plumbing.Built with versatility in mind, the HYDRA Livewell Pump includes a secondary outlet for wash-down applications, an integrated sealant channel to prevent leaks, and both short and long threaded intake options for flexible installations. Available in 600, 800, and 1100 GPH configurations and meeting ABYC, ISO, and U.S. Coast Guard standards, HYDRA is the premium solution for reliable livewell performance.Features:
ANTI-AIRLOCK DESIGN: Engineered to restart reliably, even with air in the line.
316 STAINLESS STEEL MOTOR SHAFT: Corrosion-resistant for long-term durability.
PRECISION BALANCED MOTOR: Runs smoother with reduced vibration and noise.
REMOVABLE NOZZLE: Allows quick service without disconnecting the hose.
STATOR VANE TECHNOLOGY: Optimizes flow efficiency and performance.
DUAL-LOCK CARTRIDGE: Designed for quick removal and fast service.
SECONDARY OUTLET: Dedicated outlet for wash-down pump.
SEALANT CHANNEL: Integrated to prevent leaks.
LONG: 3.5" (3/4"-14) Threaded intake tube (Hole installation size: 1-1/16")
FLOW RATE: 600 GPH
AMP DRAW: Approx. 3A
FUSE SIZE: 4 AMP
INSTALL HOLE: 1-1/16"
HYDRA™ Automatic Bilge Pump - 1100 GPH - 12VThe T-H Marine HYDRA™ Automatic Bilge Pump is engineered for reliable, high-performance water removal with long-term durability built in. Backed by 4,000 hours of testing, HYDRA delivers dependable operation through its advanced anti-airlock design, ensuring reliable restarts even when air is present in the line. A precision-balanced motor with a 316 stainless steel motor shaft reduces vibration, noise, and corrosion for smooth, long-lasting performance in harsh marine environments.Designed for simplified service and OEM-friendly installation, HYDRA features a removable nozzle for quick maintenance without disconnecting hoses and a positive-lock strainer base that matches most standard mounting patterns. The integrated Sure-Start™ float switch and programmed start delay prevent false starts and extend pump life, while the external test knob allows fast manual operation checks. Available in 800 GPH and 1100 GPH models and meeting all major ABYC, ISO, and U.S. Coast Guard standards, HYDRA is built for confidence on every outing.Features:
FLOW RATE: 1100 GPH
AMP DRAW: Approx. 5A
FUSE SIZE: 7.5 AMP
ANTI-AIRLOCK DESIGN: Engineered to restart reliably, even with air in the line.
316 STAINLESS STEEL MOTOR SHAFT: Corrosion-resistant for long-term durability.
PRECISION BALANCED MOTOR: Runs smoother with reduced vibration and noise.
REMOVABLE NOZZLE: Allows quick service without disconnecting the hose.
STATOR VANE TECHNOLOGY: Optimizes flow efficiency and performance.
POSITIVE-LOCK STRAINER BASE: Mounting pattern matches most manufacturers.
SURE-START FLOAT SWITCH: Corrosion-proof design for a reliable start every time.
EXTERNAL TEST KNOB: Allows for quick manual testing.
INCLUDES: Straight & 90º Outlet, Backflow Restrictor, and Flat Seal.
HYDRA™ Automatic Bilge Pump - 800 GPH - 12VThe T-H Marine HYDRA™ Automatic Bilge Pump is engineered for reliable, high-performance water removal with long-term durability built in. Backed by 4,000 hours of testing, HYDRA delivers dependable operation through its advanced anti-airlock design, ensuring reliable restarts even when air is present in the line. A precision-balanced motor with a 316 stainless steel motor shaft reduces vibration, noise, and corrosion for smooth, long-lasting performance in harsh marine environments.Designed for simplified service and OEM-friendly installation, HYDRA features a removable nozzle for quick maintenance without disconnecting hoses and a positive-lock strainer base that matches most standard mounting patterns. The integrated Sure-Start™ float switch and programmed start delay prevent false starts and extend pump life, while the external test knob allows fast manual operation checks. Available in 800 GPH and 1100 GPH models and meeting all major ABYC, ISO, and U.S. Coast Guard standards, HYDRA is built for confidence on every outing.Features:
FLOW RATE: 800 GPH
AMP DRAW: Approx. 4A
FUSE SIZE: 5 AMP
ANTI-AIRLOCK DESIGN: Engineered to restart reliably, even with air in the line.
316 STAINLESS STEEL MOTOR SHAFT: Corrosion-resistant for long-term durability.
PRECISION BALANCED MOTOR: Runs smoother with reduced vibration and noise.
REMOVABLE NOZZLE: Allows quick service without disconnecting the hose.
STATOR VANE TECHNOLOGY: Optimizes flow efficiency and performance.
POSITIVE-LOCK STRAINER BASE: Mounting pattern matches most manufacturers.
SURE-START FLOAT SWITCH: Corrosion-proof design for a reliable start every time.
EXTERNAL TEST KNOB: Allows for quick manual testing.
INCLUDES: Straight & 90º Outlet, Backflow Restrictor, and Flat Seal.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
HYDRA™ Livewell Pump - 1100 GPH - 12V - Short NozzleThe T-H Marine HYDRA™ Livewell Pump is engineered for consistent livewell circulation with simplified service and dual-function capability for serious anglers. Backed by 4,000 hours of testing, HYDRA delivers dependable performance through an anti-airlock design that ensures reliable restarts—even when air is present in the line.Designed for durability in harsh marine environments, the pump features a precision-balanced motor and a 316 stainless steel motor shaft to reduce vibration, noise, and corrosion over time. Stator vane technology optimizes flow efficiency, while the dual-lock cartridge design allows fast motor removal and service without disconnecting hoses or plumbing.Built with versatility in mind, the HYDRA Livewell Pump includes a secondary outlet for wash-down applications, an integrated sealant channel to prevent leaks, and both short and long threaded intake options for flexible installations. Available in 600, 800, and 1100 GPH configurations and meeting ABYC, ISO, and U.S. Coast Guard standards, HYDRA is the premium solution for reliable livewell performance.Features:
SHORT: 1.5" (3/4"-14) Threaded intake tube (Hole installation size: 1-1/16"
FLOW RATE: 1100 GPH
AMP DRAW: Approx. 5A
FUSE SIZE: 6 AMP
INSTALL HOLE: 1-1/16"
ANTI-AIRLOCK DESIGN: Engineered to restart reliably, even with air in the line.
316 STAINLESS STEEL MOTOR SHAFT: Corrosion-resistant for long-term durability.
PRECISION BALANCED MOTOR: Runs smoother with reduced vibration and noise.
REMOVABLE NOZZLE: Allows quick service without disconnecting the hose.
STATOR VANE TECHNOLOGY: Optimizes flow efficiency and performance.
DUAL-LOCK CARTRIDGE: Designed for quick removal and fast service.
SECONDARY OUTLET: Dedicated outlet for wash-down pump.
SEALANT CHANNEL: Integrated to prevent leaks.
Recessed Flapper Scupper Drains - WhiteThese innovative push-together scuppers easily snap together to adjust to varying hull thicknesses. The mating ribs lock the pieces together for a secure installation. The male portion can be cut off to accommodate thinner hulls. Available in two different female lengths to accommodate hulls from 1 1/2" to 3 5/8". Installs in a 1-7/8" hole. Flange O.D. is 2 15/16".Features:
Low-profile design enhances aesthetic appeal while ensuring functionality
Flexible thermo-plastic flappers resist curling, rotting, and loss of sealing
HYDRA™ Cartridge Bilge Pump - 800 GPH - 12VThe HYDRA™ Cartridge Bilge Pump is engineered for dependable marine water removal with a service-friendly cartridge design that allows rapid motor replacement without removing the pump housing. Backed by 4,000 hours of testing, HYDRA delivers consistent performance through an advanced anti-airlock design that ensures reliable restarts—even when air is present in the line.Built for long-term durability in harsh marine environments, the HYDRA Cartridge Bilge Pump features a precision-balanced motor and a 316 stainless steel motor shaft to reduce vibration, noise, and corrosion. Stator vane technology optimizes flow efficiency, while the dual-lock cartridge system allows quick, tool-free motor removal for fast servicing on the water or at the dock.Designed with OEM-friendly installation in mind, the positive-lock strainer base matches most standard mounting patterns, and the pump includes straight and 90° outlets, a backflow restrictor, and a flat seal for flexible plumbing configurations. Available in 600 GPH, 800 GPH, and 1100 GPH options and meeting ABYC, ISO, and U.S. Coast Guard standards, the HYDRA Cartridge Bilge Pump delivers reliable performance boaters can trust.Features:
AMP DRAW: Approx. 4A
FUSE SIZE: 5 AMPFLOW RATE: 800 GPH
ANTI-AIRLOCK DESIGN: Engineered to restart reliably, even with air in the line.
316 STAINLESS STEEL MOTOR SHAFT: Corrosion-resistant for long-term durability.
PRECISION BALANCED MOTOR: Runs smoother with reduced vibration and noise.
REMOVABLE NOZZLE: Allows quick service without disconnecting the hose.
STATOR VANE TECHNOLOGY: Optimizes flow efficiency and performance.
POSITIVE-LOCK STRAINER BASE: Mounting pattern matches most manufacturers.
DUAL LOCK CARTRIDGE: Designed for quick removal and fast service.
INCLUDES: Straight & 90º Outlet, Backflow Restrictor, and Flat Seal
HYDRA™ Livewell Pump - 800 GPH - 12V - Short NozzleThe T-H Marine HYDRA™ Livewell Pump is engineered for consistent livewell circulation with simplified service and dual-function capability for serious anglers. Backed by 4,000 hours of testing, HYDRA delivers dependable performance through an anti-airlock design that ensures reliable restarts—even when air is present in the line.Designed for durability in harsh marine environments, the pump features a precision-balanced motor and a 316 stainless steel motor shaft to reduce vibration, noise, and corrosion over time. Stator vane technology optimizes flow efficiency, while the dual-lock cartridge design allows fast motor removal and service without disconnecting hoses or plumbing.Built with versatility in mind, the HYDRA Livewell Pump includes a secondary outlet for wash-down applications, an integrated sealant channel to prevent leaks, and both short and long threaded intake options for flexible installations. Available in 600, 800, and 1100 GPH configurations and meeting ABYC, ISO, and U.S. Coast Guard standards, HYDRA is the premium solution for reliable livewell performance.Features:
ANTI-AIRLOCK DESIGN: Engineered to restart reliably, even with air in the line.
316 STAINLESS STEEL MOTOR SHAFT: Corrosion-resistant for long-term durability.
PRECISION BALANCED MOTOR: Runs smoother with reduced vibration and noise.
REMOVABLE NOZZLE: Allows quick service without disconnecting the hose.
STATOR VANE TECHNOLOGY: Optimizes flow efficiency and performance.
DUAL-LOCK CARTRIDGE: Designed for quick removal and fast service.
SECONDARY OUTLET: Dedicated outlet for wash-down pump.
SEALANT CHANNEL: Integrated to prevent leaks.
SHORT: 1.5" (3/4"-14) Threaded intake tube (Hole installation size: 1-1/16"
FLOW RATE: 800 GPH
AMP DRAW: Approx. 4A
FUSE SIZE: 5 AMP
INSTALL HOLE: 1-1/16"
