Pinpoint GPS Gateway KitThe MotorGuide Gateway Kit will take your fishing technology to the ultimate levelThe MotorGuide Gateway Kit will connect a Pinpoint GPS-equipped MotorGuide Xi5 trolling motor to a compatible Lowrance fishfinder/chartplotter through an existing NMEA 2000 network.Kit Includes:
1 - Pinpoint GPS-NMEA 2000 Gateway Cable (6'/1.8m)
1 - NMEA 2000 T-Connector
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
G-Force Troll Cable Organizer - Black NeopreneWith the patented design of T-H Marine's Troll Jacket, you can protect and manage your trolling motor cables with ease!The G-Force Troll Jacket is a 2mm neoprene trolling motor wire and cable organizer. It measures 60” long and includes a velcro closure. While wrapped, the diameter is about 1.5”.For maximum compatibility for your setup, you can cut and trim the sides where your cables need to come out. This eliminates the need for zip ties along the factory cable cover. It also helps you bundle and organize adjacent wires, like those for your depth finder and HydroWave.Beyond organization, the Troll Jacket prevents exposure of factory cables. If your cables have electrical tape repair, the Troll Jacket gives an additional layer of defense against the elements.
i-Pilot System Remote Access w/BluetoothNOTHING COMES REMOTELY CLOSE.The same i-Pilot that lets you lock onto a fishing spot, record and retrace paths, and command speed and steering just got better. Redesigned with a larger LCD screen, more options, and better controls, we've dialed in the technology that lets you dial in your boat position.Redesigned RemoteWe gave it a 33% larger LCD screen that's fully viewable in sunlight, expanded menu navigation, and more intuitive controls - making the i-Pilot remote better than ever.Bluetooth CommunicationThe new i-Pilot system connects via Bluetooth, allowing for easy software updates to add new features to your system via your smartphone.i-Pilot Phone AppBluetooth communication allows new i-Pilot to pair with your smartphone, allowing for easy software updates and quick command of speed, steering, Spot-Lock, high speed bypass, and Advanced AutoPilot.Heading SensorSelect i-Pilot systems feature a new Heading Sensor, which recognizes changes in the boat's heading due to wind andcurrent, and communicates with the i-Pilot system to minimize boat swing for a more accurate, stronger hold.Reinvented Spot-LockEnhanced with new hardware and software algorithms, Spot-Lock works holds you tighter to your fishing spot than ever before, making it the most accurate electronic GPS anchor ever.Spot-Lock JogMove your Spot-Lock five feet forward, backward, left or right - just by pushing a button.Additional Features:
iTrack Record/Playback: Store and retrace up to six 2-mile trolling paths to return to later
Advanced AutoPilot: Stay on a heading automatically
Cruise Control: Precisely dial in and adjust speed in 0.1 mile-per-hour increments
CoPilot: Control and monitor speed, steering, prop on/off and high speed bypass
*The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Johnson Outdoors, Inc. is under license. Other trademarks and trade names are those of their respective owners.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)Brochure (pdf)
Heading Sensor for BlueTooth i-PilotThis Bluetooth-enabled heading sensor contains a compass that detects your boat's heading and communicates it to your trolling motor to enable the Spot-Lock Jog feature, which lets you move your Spot-Lock 5' increments in any direction. Available as an add-on accessory for PowerDrive and Riptide PowerDrive trolling motors that come pre-installed with Bluetooth i-Pilot systems (model year 2017 and after).This heading sensor comes standard with updated Ultrex, Ulterra, Terrova, Riptide Ulterra and Riptide Terrova trolling motors that come pre-installed with Bluetooth i-Pilot and i-Pilot Link systems. (model year 2017 and after).HEADING SENSOR ONLY. Compatible with Bluetooth-enabled i-Pilot systems only. This remote will only work with i-Pilot systems that are equipped with Bluetooth. It is NOT compatible with systems that do not use Bluetooth.Refer to original remote or product manual that came with trolling motor to ensure system compatibility.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Pinpoint GPSMotorGuide's proprietary Pinpoint GPS technology - available either integrated with select models or as an easy upgrade. Pinpoint uses an ultra-precise GPS receiver and precision control algorithms for incredibly accurate performance.A compact, easy-to-use remote controls these Pinpoint features:Anchor
Holds boat position on a fixed GPS coordinate
Stores and recalls up to eight positions
While in Anchor mode, the directional controls can be used to move the boat in 5-foot increments in any direction
Heading LockNavigates the boat to a specific compass headingRouteRecord and playback up to eight routes of up to four miles eachCruise ControlHold a GPS speed while navigating a heading or routeWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Terrova/Riptide Terrova Corded Foot PedalThe low-profile design offers two steering options: heel/toe pedal and left/right steering buttons. Includes Spot-Lock activation, a rotary speed control dial, a momentary/constant on toggle, an AutoPilot on/off toggle, and an 18' cable with a waterproof connector plug. Plug-n-play with Terrova or Riptide Terrova motors, and works in conjunction with CoPilot, i-Pilot, i-Pilot Link, and GPS navigation systems. Compatible with Terrova and Riptide Terrova trolling motors, model years 2017 and after.Features:
Spot-Lock ON/OFF button with LED indicator
Low-profile, waterproof design
Heel/toe pedal and left/right steering options
AutoPilot ON/OFF button with LED indicator
Momentary/Constant ON button with LED indicator
18' cable with waterproof connector plug
Plug-n-play with Terrova or Riptide Terrova motors, and works in conjunction with CoPilot, i-Pilot, i-Pilot Link, and new GPS navigation systems
Compatible with Terrova and Riptide Terrova trolling motors model year 2017 and after
Terrova/Riptide Terrova QUEST Corded Foot PedalThe low-profile design offers two steering options: heel/toe pedal and left/right steering buttons. Includes Spot-Lock activation, a rotary speed control dial, a momentary/constant on the toggle, a One-Boat Network programmable button on/off toggle, and an 18' cable with a waterproof connector plug. Plug-n-play with Terrova or Riptide Terrova QUEST motors.Features:
Spot-Lock ON/OFF button with LED indicator
Low-profile, waterproof design
Heel/toe pedal and left/right steering options
One-Boat Network programmable ON/OFF button with LED indicator to stow and deploy shallow water anchors, mark a waypoint, or engage the autopilot
Momentary/Constant ON button with LED indicator
Rotary speed control dial
18' cable with waterproof connector plug
Compatible with Terrova or Riptide Terrova QUEST motors
Advanced GPS Navigation Wireless RemoteThe Advanced GPS Navigation system can be paired with up to three wireless remotes. Add extra remotes to your setup for added flexibility. The waterproof remote is lightweight with intuitive user menus and a simplified keypad with four customizable One-Boat Network buttons, three on the keypad and one side button. Program these buttons to functions that fit any fishing style, control connected Talon or Raptor shallow water anchors, Auto Stow/Deploy and Power Trim with RT Instinct and Ulterra models, or even mark a waypoint on a connected Humminbird fish finder. Includes Minn Kota lanyard and carabiner and is powered by 2 AA batteries (included). Features:
The Advanced GPS Navigation system can be paired with multiple remotes. Add extra remotes to your setup for increased flexibility.
Features four programable One-Boat Network buttons
Compatible with Bluetooth-enabled Advanced GPS Navigation systems only
Waterproof and lightweight
Wireless Remote is powered by 2 AA batteries (included)
Lanyard and carabiner are included
MKA-62 Cable-Steer Quick Release BracketFor quick, easy removal of your cable-steer, bow-mount trolling motor. The extruded aluminum design with side screws provides a quiet, secure locking system. Fits 52" to 72" shaft foot-control motors and 62" shaft hand-control motors. They are designed to handle the increased torque of QUEST series motors.Features:
Recommended for the higher thrust associated with Ultrex™ QUEST™ series motors
Allows trolling motors to be quickly removed from and reattached to the boat deck
Top and bottom plates slide together and are tightened/secured to one another using dual-locking hardware
Solid, anodized aluminum construction
Includes both 5/16" and 1/4" stainless steel mounting hardware
Brackets can be secured with a padlock (not included) for additional security
Fits 52" to 72" shaft, foot-control motors, and 62" shaft hand-control motors
MKR-28 Trolling Motor Plug & ReceptacleThe MKR-28 trolling Motor Plug and Receptacle provides continuous power and are rated to 60 amps up to 48V. Designed for freshwater and saltwater applications, silver-plated terminals provide reliable use in the harshest conditions. This plug is the recommended replacement for the MKR-18 Plug & Receptacle (part number 1865102) and MKR-26 (part number 1865128). Package includes: trolling motor plug with 18” wire lead, receptacle with 24” wire lead, mounting faceplate, dust cap, 1-10 AWG splicer, 1 AWG ferrule, 2 AWG ferrule, 4 AWG ferrule, heat shrink, hex wrench, and installation manual.Features:
Trolling Motor Plug and Receptacle provide continuous power rated to 60 amps up to 48V
Designed for freshwater and saltwater applications
Silver-plated terminals for a reliable corrosion-resistant connection in any freshwater or saltwater application
Sealed waterproof design
Secure threaded electrical connection
Adjustable mounting orientations
Continuous power rated to 60 amps up to 48V
8 AWG wire leads
Compatible with 1 - 10 AWG wire sizes
i-PILOT LINK REMOTE HOLDING CRADLE - BLUETOOTHSecure i-Pilot Link remote to your belt or console with this versatile cradle. Use the belt clip for constant easy access, or remove the belt clip and mount i-Pilot Link cradle to your dash for simple, straightforward operation.Compatible only with Bluetooth-enabled i-Pilot Link remotes.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Wireless Remote Key FOBWireless remote for use with Xi series motorsWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Pinpoint GPS Replacement RemoteReplacement remote for use with Xi5 ModelsWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
MKA-32 Electric Steer Quick Release Bracket with Cover Features:
Designed for fast removal of any Terrova™, PowerDrive™ V2, or PowerDrive bow-mount trolling motor
Cam-lock design features ultra-tight tolerances that eliminate bracket movement and noise
The locking lever includes a pin and lanyard
Upper and lower plates include slots for securing with a padlock (not included)
Includes a composite cover that attaches to the lower half of the bracket when the motor is removed, keeping the deck profile clean
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
MKA-49 Cable & HandleFor Minn Kota cable steer bow-mount motors, this replacement handle features an ergonomic soft-grip design with an ultra-strong, abrasion-resistant, coated stainless steel braided cable.Features:Compatible with cable steer bow-mount motors: Fortrex, Maxxum, Edge, Riptide SF, Riptide SM and Riptide SEWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)
RT Instinct/Ulterra Quest Corded Foot PedalDual mode operation controls AutoStow/Deploy and Power Trim as well as steering, speed, prop on/off, Spot-Lock, and a One-Boat Network programable button. Includes an 18' cord with a waterproof connector.Features:
One-Boat Network programable button with LED indicator
Low-profile, waterproof design
Heel/toe pedal and left/right steering options
Spot-Lock ON/OFF button with LED indicator
Momentary/Constant ON button with LED indicator
Rotary speed control dial
18' cable with waterproof connector plug
Works in conjunction with the Advanced GPS Navigation Remote Control and Remote Power Switch / MKA-30
Compatible with the QUEST series, RT Instinct, and Ulterra
MKP-40 Power PropDesigned to deliver optimal power, torque, and efficiency. Designed to work exclusively with QUEST Series motors. Includes prop pin, nut, and washer.Features:
Power Prop, made exclusively for QUEST Series motors, is designed for maximum torque and efficiency
Designed to deliver optimal power, torque, and efficiency
Fits 4-1/2" QUEST Series lower units
For use with a 1" x 3/16" Prop/Drive Pin
Prop nut thread 3/8" - 24
MKA-60 Stabilizer KitReduces bounce on bow-mount trolling motors. Equipped with a low profile mounting base that allows the stabilizer to be easily removed. The pivoting arm can be folded down when not in use.Features:
Reduces motor bounce in the stowed position
Absorb vibrations to protect the motor shaft
Folds down when not in use
Multiple mounting orientations to fit your boat configuration
Easily removable, it leaves only a low-profile base
Stabilizer shafts can be cut to fit
Multi-position strap adjusts to accommodate all shaft sizes
Includes Stainless steel mounting hardware
Compatible with the QUEST series RT Instinct, Ulterra, RT Terrova, Terrova, and Ulterra, Riptide Ulterra, Terrova, Riptide Terrova, Riptide ST, PowerDrive, Riptide PowerDrive, PowerDrive V2, Riptide SP, and PowerDrive Pontoon
Get the power you need to push through the thick stuff with the Power Prop. Fits 3-1/4" (MKP-2) and 3-5/8" (MKP-25) diameters.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
MKP-34 Prop & Nut Kit E Quickly, easily remove or replace your prop with this kit. Each kit includes a prop nut and washer. A crescent wrench is required for installation. Compatible with Minn Kota Props: MKP-33 Weedless Wedge 2 (part number 233160 / 1865018) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)
MKA-21 Composite Quick Release BracketEasily remove your electric-steer, bow-mount trolling motor. High-yield composite construction is super strong and impervious to corrosion. Low-profile design leaves deck clear when motor is removed. Locking handle with stainless steel pins can be secured with padlock (padlock not included, sold separately).NOTE: Not for use with 72" shaft length motors. Features
Allows trolling motor to be quickly removed from and reattached to boat deck
Low-profile design attaches trolling motor to top bracket and drops in over deck-mounted puck
Composite construction resistant to rust, corrosion, and discoloration
Includes stainless steel mounting hardware and locking pin
Locking handle can be secured with padlock (not included) for additional security
Compatible with Ulterra, Terrova, PowerDrive, PowerDrive V2, PowerDrive Pontoon and Deckhand 40NOTE: Not for use with any 112 lbs. thrust motors or any motor with a shaft length of 72” or longer. Instead use the MKA-53 model.
Designed for use in freshwater
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Easily remove your bow-mount motor with these high-yield composite brackets. They're ultra-strong, corrosion-resistant and feature a low-profile design that leaves the deck clear when the motor is removed. A locking handle with stainless steel pins can be secured with a padlock (not included).Compatible with any Foretrex, Maxxum Pro, All Terrain, or Edge modelsWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Digital Battery Meter (MK-BM-1D)
Monitors voltage level and "state of charge" of any 12-volt battery
LCD display
Compact frame for easy storage
LED's indicate, 2/3, 1/3 or O "state of charge."
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
MKR-DSC-16 DSC Transducer Adapter Cable - Lowrance® 9-PINThe adapter connects select Lowrance fish finders with Minn Kota's built-in Dual Spectrum CHIRP transducer on your trolling motor. Shielded, IP68-rated waterproof connectors are metal-tipped to prevent sonar interference. *Only provides traditional 2D sonar.Features:
Connects select Lowrance® fish finders with a Minn Kota motor and a built-in Dual Spectrum CHIRP transducer
Shielded cable for crystal-clear sonar performance
Waterproof heavy-duty composite connector
Compatible with 2D sonar only
