MKR-DSC-10 DSC Transducer Adapter Cable - Lowrance® 7-PINThe adapter connects select Lowrance fish finders with Minn Kota's built-in Dual Spectrum CHIRP transducer on your trolling motor. Shielded, IP68-rated waterproof connectors are metal-tipped to prevent sonar interference. Only provides traditional 2D sonar.Features:
Connects select Lowrance® fish finders with a Minn Kota motor and a built-in Dual Spectrum CHIRP transducer
Shielded cable for crystal-clear sonar performance
Waterproof heavy-duty composite connector
Compatible with 2D sonar only
G-Force ELIMINATOR Red Prop Nut for Lowrance Ghost Trolling MotorOne of the latest products in the G-Force lineup is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter. Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for a longer battery and trolling motor life. Made to fit Lowrance Ghost trolling motors. This specific part comes in red color to provide a sleek, matching aesthetic. Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut. Key Eliminator Benefits:
Machined from 6061 Billet Aluminum
O-ring dampens noise/vibration and secures the nut
Wider contact area for a more stable prop
Cooling ports aid in heat dissipation
Anodized protected
No tools needed
Available in popular colors
Visually appealing
Designed and made in the U.S.A.
Patent pending
G-Force ELIMINATOR Red Prop Nut for Garmin Force Trolling MotorOne of the latest products in the G-Force lineup is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter. Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for a longer battery and trolling motor life. Made to fit Garmin Force trolling motors. This specific part comes in red color to provide a sleek, matching aesthetic. Factory nut and washer will have to be removed prior to installing Eliminator, also if you have an anode it will have to be removed as well to use the Eliminator.Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.Key ELIMINATOR Benefits:
Machined from 6061 Billet Aluminum
O-ring dampens noise/vibration and secures the nut
Wider contact area for a more stable prop
Cooling ports aid in heat dissipation
Anodized protected
No tools needed
Available in popular colors
Visually appealing
Designed and made in the U.S.A.
Patent pending
G-Force ELIMINATOR Black Prop Nut for Lowrance Ghost Trolling MotorOne of the latest products in the G-Force lineup is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter. Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for a longer battery and trolling motor life. Made to fit Lowrance Ghost trolling motors. This specific part comes in a black color to provide a sleek, matching aesthetic. Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut. Key Eliminator Benefits:
Machined from 6061 Billet Aluminum
O-ring dampens noise/vibration and secures the nut
Wider contact area for a more stable prop
Cooling ports aid in heat dissipation
Anodized protected
No tools needed
Available in popular colors
Visually appealing
Designed and made in the U.S.A.
Patent pending
MKR-28 Trolling Motor Plug & ReceptacleThe MKR-28 trolling Motor Plug and Receptacle provides continuous power and are rated to 60 amps up to 48V. Designed for freshwater and saltwater applications, silver-plated terminals provide reliable use in the harshest conditions. This plug is the recommended replacement for the MKR-18 Plug & Receptacle (part number 1865102) and MKR-26 (part number 1865128). Package includes: trolling motor plug with 18” wire lead, receptacle with 24” wire lead, mounting faceplate, dust cap, 1-10 AWG splicer, 1 AWG ferrule, 2 AWG ferrule, 4 AWG ferrule, heat shrink, hex wrench, and installation manual.Features:
Trolling Motor Plug and Receptacle provide continuous power rated to 60 amps up to 48V
Designed for freshwater and saltwater applications
Silver-plated terminals for a reliable corrosion-resistant connection in any freshwater or saltwater application
Sealed waterproof design
Secure threaded electrical connection
Adjustable mounting orientations
Continuous power rated to 60 amps up to 48V
8 AWG wire leads
Compatible with 1 - 10 AWG wire sizes
Troll-Tamer™ for Minn Kota Fortrex/Ultrex Trolling Motor Stabilizer Lock 5"-8" SpacingThe Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-Tamer™ Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-Tamer™ Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditionsThe latest models, RMC-108-DP and RMC-109-DP feature a clamp on shaft bracket to work with the latest in digital, wireless bow mount trolling motors, including Minn Kota Terrova, Auto Pilot, Riptide models & Motor Guide Xi5.
Troll-Tamer™ for Minn Kota Fortrex Trolling Motor Stabilizer Lock 3-1/2"-5" Spacing The Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-Tamer™ Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-Tamer™ Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditionsThe latest models, RMC-108-DP and RMC-109-DP feature a clamp on shaft bracket to work with the latest in digital, wireless bow mount trolling motors, including Minn Kota Terrova, Auto Pilot, Riptide models & Motor Guide Xi5.
Troll-Tamer™ for Minn Kota Terrova & MotorGuide Trolling Motor Stabilizer Lock 5"-8" SpacingThe Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-Tamer™ Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-Tamer™ Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditionsThe latest models, RMC-108-DP and RMC-109-DP feature a clamp on shaft bracket to work with the latest in digital, wireless bow mount trolling motors, including Minn Kota Terrova, Auto Pilot, Riptide models & Motor Guide Xi5.
Troll-Tamer™ for Minn Kota Fortrex Trolling Motor Stabilizer Lock 2-3/4"-4-1/2" Spacing The Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-Tamer™ Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-Tamer™ Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditionsThe latest models, RMC-108-DP and RMC-109-DP feature a clamp on shaft bracket to work with the latest in digital, wireless bow mount trolling motors, including Minn Kota Terrova, Auto Pilot, Riptide models & Motor Guide Xi5.
G-Force Troll Cable Organizer - Black NeopreneWith the patented design of T-H Marine's Troll Jacket, you can protect and manage your trolling motor cables with ease!The G-Force Troll Jacket is a 2mm neoprene trolling motor wire and cable organizer. It measures 60” long and includes a velcro closure. While wrapped, the diameter is about 1.5”.For maximum compatibility for your setup, you can cut and trim the sides where your cables need to come out. This eliminates the need for zip ties along the factory cable cover. It also helps you bundle and organize adjacent wires, like those for your depth finder and HydroWave.Beyond organization, the Troll Jacket prevents exposure of factory cables. If your cables have electrical tape repair, the Troll Jacket gives an additional layer of defense against the elements.
G-Force ELIMINATOR Trolling Motor Blue Prop Nut for Minn Kota 35-70 Trolling MotorOne of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.Made to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic.Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.Key ELIMINATOR Benefits:
Machined from 6061 Billet Aluminum
O-ring dampens noise/vibration and secures nut
Wider contact area for a more stable prop
Cooling ports aid in heat dissipation
Anodized protected
No tools needed
Available in popular colors
Visually appealing
Designed and made in the U.S.A.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
G-Force SILENCER Trolling Motor Vibration Pad - BlackThe G-Force SILENCER™ is a simple trolling motor modification that can help extend the life of your investment and improve function. Custom cut to fit both Motorguide and Minn Kota trolling motor mounts, the G-Force SILENCER™ creates a soft padded surface on your trolling motor mount that eliminates abrasive metal-on-metal contact. In addition to extending the life of trolling motor mounts, the G-Force SILENCER™ also quiets the harsh “clanking” noise associated with pulling your trolling motor out of the water. Protect your investment with the simple and quick addition of the T-H Marine G-Force SILENCER™.Features:
Extends life of trolling motor
Reduces noise and vibration
Eliminates metal-to-metal contact
Prevents harsh clanking when stowing trolling motor
Package will contain product for Motorguide and Minn Kota
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
G-Force Grass Goat Trolling Motor Weed Guard for Minn Kota Large - Fortrex 112-Ultrex 80-112A must-have for anglers who spend a lot of time in heavily vegetated areas, the Grass Goat is an aftermarket cutting-tool for your trolling motor that slices through vegetation and keeps your trolling motor clear of debris. Featuring a genuine marine grade starboard mounting plate, it also comes equipped with a 316 stainless steel cutting-blade to ensure years of use under the toughest conditions.Incredibly easy to install, the Grass Goat comes with all of the necessary mounting hardware and easy-to-follow instructions that will have you fishing weedlessly in no time. Don’t waste anymore time removing grass from your trolling motor when your fishing through your favorite honey hole, get the Grass Goat today.Features:
Keeps your trolling motor clear of debris
Genuine Marine Grade
Starboard Mounting Plate
Stainless Steel Cutting-Blade
NOTE: This product is not compatible with Minn Kota Edge motors
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
G-Force EQUALIZER Trolling Motor Lift Assist - RedThe G-Force EQUALIZER™ trolling motor list assist system consists of two air pistons that attach to almost any Motorguide Gator Mount to provide effortless lifting in-and-out of the water. Complete with easy-to-follow instructions, drilling template, and marine-grade hardware, the EQUALIZER™ is quick and straightforward to install. A must-have for any Motorguide owner, the EQUALIZER™ is a great way to offset the added weight of StructureScans and Hydrowaves, so your time on the water is as comfortable as possible.Includes:
2X EQUALIZER™ Trolling Motor Assist Air Pistons
Drilling template
Marine-grade stainless steel hardware
Instructions
Picture of the mount and basic guidelines
Equalizer decal
Spacer set available for certain boats that need a riser spacer on gunnel
NOTE: Not compatible with Motorguide X3 motors
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
G-Force Grass Goat Trolling Motor Weed Guard for Minn Kota Small 80-101A must-have for anglers who spend a lot of time in heavily vegetated areas, the Grass Goat is an aftermarket cutting-tool for your trolling motor that slices through vegetation and keeps your trolling motor clear of debris. Featuring a genuine marine grade starboard mounting plate, it also comes equipped with a 316 stainless steel cutting-blade to ensure years of use under the toughest conditions.Incredibly easy to install, the Grass Goat comes with all of the necessary mounting hardware and easy-to-follow instructions that will have you fishing weedlessly in no time. Don’t waste anymore time removing grass from your trolling motor when your fishing through your favorite honey hole, get the Grass Goat today.Features:
Keeps your trolling motor clear of debris
Genuine Marine Grade
Starboard Mounting Plate
Stainless Steel Cutting-Blade
NOTE: This product is not compatible with Minn Kota Edge motors
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
G-Force SILENCER Trolling Motor Vibration Pad - RedThe G-Force SILENCER™ is a simple trolling motor modification that can help extend the life of your investment and improve function. Custom cut to fit both Motorguide and Minn Kota trolling motor mounts, the G-Force SILENCER™ creates a soft padded surface on your trolling motor mount that eliminates abrasive metal-on-metal contact. In addition to extending the life of trolling motor mounts, the G-Force SILENCER™ also quiets the harsh “clanking” noise associated with pulling your trolling motor out of the water. Protect your investment with the simple and quick addition of the T-H Marine G-Force SILENCER™.Features:
Extends life of trolling motor
Reduces noise and vibration
Eliminates metal-to-metal contact
Prevents harsh clanking when stowing trolling motor
Package will contain product for Motorguide and Minn Kota
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
G-Force ELIMINATOR Trolling Motor Clear/Silver Prop Nut for Minn Kota 35-70 Trolling MotorOne of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.Made to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic.Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.Key ELIMINATOR Benefits:
Machined from 6061 Billet Aluminum
O-ring dampens noise/vibration and secures nut
Wider contact area for a more stable prop
Cooling ports aid in heat dissipation
Anodized protected
No tools needed
Available in popular colors
Visually appealing
Designed and made in the U.S.A.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
G-Force ELIMINATOR Trolling Motor Black Prop Nut for Minn Kota 35-70 Trolling MotorOne of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.Made to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic.Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.Key ELIMINATOR Benefits:
Machined from 6061 Billet Aluminum
O-ring dampens noise/vibration and secures nut
Wider contact area for a more stable prop
Cooling ports aid in heat dissipation
Anodized protected
No tools needed
Available in popular colors
Visually appealing
Designed and made in the U.S.A.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
MKR-MI-1 Adapter Cable for Helix 8,9,10 & 12 MSI Units MEGA Imaging® uses high-frequency sonar so you can easily distinguish fish from structure, see the direction fish are facing and even target individual species. And now with MEGA Imaging+, you'll be able to scan deeper and wider without sacrificing clarity. Adapter connects your Humminbird HELIX 8, 9, 10 or 12 fish finder with a built-in MEGA Side or Down Imaging transducer on your trolling motor. Features:
Shielded cable for crystal-clear MEGA Down Imaging sonar performance
Compatible with HELIX
Adapter not required for SOLIX models
MKR-US2-15 Lowrance 8-Pin Tripleshot ADP for Hook2Universal Sonar 2 delivers advanced water temperature sensing for the best view of the waters below. Adapter connects your Lowrance Hook2 fish finder with a Universal Sonar 2 transducer on your trolling motor.Features:Shielded, IP68-rated waterproof connectors are metal tipped to prevent sonar interference
MKR-MDI-2 Humminbird HELIX MDI Sonar Adapter Cable for HELIX 7MEGA Imaging® uses high-frequency sonar so you can easily distinguish fish from structure, see the direction fish are facing and even target individual species. And now with MEGA Imaging+, you'll be able to scan deeper and wider without sacrificing clarity. Adapter connects your Humminbird HELIX 7 G3/G4 fish finder with a built-in MEGA Down Imaging transducer on your trolling motor.
Connects your Humminbird HELIX fish finder to a Minn Kota motor equipped with Built-In MEGA Down Imaging
Shielded cable for crystal-clear MEGA Down Imaging sonar performance
Compatible with HELIX 7 models
Adapter not required for SOLIX models
Cable length: 30 inches
Compatible Units:HELIX 7 CHIRP GPS G2N*/G3NThe built-in transducer cannot supply MEGA Down Imaging to Humminbird models that do not already have the capability. If you have a G2/G2N or a G3/G3N HELIX that is not a MEGA SI or MEGA DI model, you will still get 2D CHIRP Digital Sonar from the transducer.*HELIX G2 and G2N units need to be running the latest software update to view sonar from Built-In MEGA Down Imaging motors.
Heading Sensor for BlueTooth i-PilotThis Bluetooth-enabled heading sensor contains a compass that detects your boat's heading and communicates it to your trolling motor to enable the Spot-Lock Jog feature, which lets you move your Spot-Lock 5' increments in any direction. Available as an add-on accessory for PowerDrive and Riptide PowerDrive trolling motors that come pre-installed with Bluetooth i-Pilot systems (model year 2017 and after).This heading sensor comes standard with updated Ultrex, Ulterra, Terrova, Riptide Ulterra and Riptide Terrova trolling motors that come pre-installed with Bluetooth i-Pilot and i-Pilot Link systems. (model year 2017 and after).HEADING SENSOR ONLY. Compatible with Bluetooth-enabled i-Pilot systems only. This remote will only work with i-Pilot systems that are equipped with Bluetooth. It is NOT compatible with systems that do not use Bluetooth.Refer to original remote or product manual that came with trolling motor to ensure system compatibility.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
TM Quick ConnectorsAttwood's Trolling Motor Quick Connectors is the safe and easy quick connect / disconnect system from your trolling motor to your battery. For use where a plug and socket cannot be used. Heavy duty 10-gauge connector.
Replaces battery clips
2-connector kit
Safe and easy
Semi-gloss finish
MKR-US2-13 Universal Sonar 2 Adapter Cable Connects Humminbird ONIX FishfinderUniversal Sonar 2 delivers advanced water temperature sensing and DualBeam PLUS technology for the best view of the waters below. Adapter connects your Humminbird ONIX fishfinder with a Universal Sonar 2 transducer on your trolling motor. Shielded, IP68-rated waterproof connectors are metal tipped to prevent sonar interference.*200 kHz/83 kHz compatible and only provides traditional 2D sonar Brochure (pdf)
