Letter & Number Kit - WhiteFeatures:
3-inch, waterproof vinyl, pressure-sensitive labels
Resists fuel, fading, and scratches
Kit contains (White Pieces): Four of each letter and number, plus twelve dashes totaling 148 pieces
*Meets USCG guidelines Quick Guide (pdf)
Motor Well Boot for 4 (inch) Diameter OpeningThe motor well boot provides an organized, covered pass-thru for control cables, wires, or fuel lines. The split side allows for installation without disconnecting controls.Features:
Sold as a single pack that contains two Motor Well Boots
Includes ties for a secure fit
Black rubber, UV-resistant construction with polypropylene attachment gasket ring
*Designed for a 4-inch diameter opening
10" Hole Shot Plate for Z-Lock™ Jack PlateREVOLUTIONARY...SIMPLE...UNIQUE...EXCITING.These are but a few of the comments coming from users of T-H Marine's HOT SHOT™ hole shot plates. This simple but revolutionary plate easily attaches to the bottom of our jack plate to provide an amazing 18 to 20 percent better hole shot. That's 2 to 3 seconds faster out of the hole. Hot Shot™ does this by dramatically reducing water drag on take-off as well as serving as a center trim tab. An added advantage is the ability to stay on a plane and virtually eliminate porpoising at lower speeds.Models available for Z-LOCK™ manual plates. Features:
Provides Improved Hole Shot
Reduces Water Drag at Take Off
Reduces Porpoising
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Transom Support Plate Lower MountFeatures:
10" Bolt Hole Pattern
Top Bolt Holes-Standard
3/8" Thickness. High quality Cast Aluminum
Distributes the stress of the motor mounting bolts
Troll-Tamer™ for Minn Kota Terrova & MotorGuide Trolling Motor Stabilizer Lock 5"-8" SpacingThe Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-Tamer™ Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-Tamer™ Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditionsThe latest models, RMC-108-DP and RMC-109-DP feature a clamp on shaft bracket to work with the latest in digital, wireless bow mount trolling motors, including Minn Kota Terrova, Auto Pilot, Riptide models & Motor Guide Xi5.
Troll-Tamer™ for Minn Kota Fortrex Trolling Motor Stabilizer Lock 2-3/4"-4-1/2" Spacing The Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-Tamer™ Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-Tamer™ Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditionsThe latest models, RMC-108-DP and RMC-109-DP feature a clamp on shaft bracket to work with the latest in digital, wireless bow mount trolling motors, including Minn Kota Terrova, Auto Pilot, Riptide models & Motor Guide Xi5.
12" Atlas Series Hot Shot™ Jack Plate Hole Shot Plate - VeradoREVOLUTIONARY. SIMPLE. UNIQUE. EXCITING. These are but a few of the comments coming from users of T-H Marine's HOT SHOT™ hole shot plates. This simple-but-revolutionary plate easily attaches to the bottom of our jack plate to provide an amazing 18 to 20 percent better hole shot. That is 2 to 3 seconds faster out of the hole. Hot Shot™ does this by dramatically reducing water drag on take off as well as serving as a center trim tab. An added advantage is the ability to stay on plane and virtually eliminating porpoising at lower speeds.Features:
Models available for our ATLAS™ hydraulic jack plates and Z-LOCK™ manual plates.
Models Marked "T" Have side imaging Transducer Cut-Out. Slot fits most Model SI Transducers.
Models to Fit All ATLAS™ Jack Plates (both standard and heavy duty jack plates)
Provides Improved Hole Shot
Reduces Water Drag at Take Off
Reduces Porpoising
8" Atlas Series Hot Shot™ Jack Plate Hole Shot Plate - VeradoREVOLUTIONARY. SIMPLE. UNIQUE. EXCITING. These are but a few of the comments coming from users of T-H Marine's HOT SHOT™ hole shot plates. This simple-but-revolutionary plate easily attaches to the bottom of our jack plate to provide an amazing 18 to 20 percent better hole shot. That is 2 to 3 seconds faster out of the hole. Hot Shot™ does this by dramatically reducing water drag on take off as well as serving as a center trim tab. An added advantage is the ability to stay on plane and virtually eliminating porpoising at lower speeds.Features:
Models available for our ATLAS™ hydraulic jack plates and Z-LOCK™ manual plates.
Models Marked "T" Have side imaging Transducer Cut-Out. Slot fits most Model SI Transducers.
Models to Fit All ATLAS™ Jack Plates (both standard and heavy duty jack plates)
Provides Improved Hole Shot
Reduces Water Drag at Take Off
Reduces Porpoising
14" Atlas Series Hot Shot™ Jack Plate Hole Shot Plate - VeradoREVOLUTIONARY. SIMPLE. UNIQUE. EXCITING. These are but a few of the comments coming from users of T-H Marine's HOT SHOT™ hole shot plates. This simple-but-revolutionary plate easily attaches to the bottom of our jack plate to provide an amazing 18 to 20 percent better hole shot. That is 2 to 3 seconds faster out of the hole. Hot Shot™ does this by dramatically reducing water drag on take off as well as serving as a center trim tab. An added advantage is the ability to stay on plane and virtually eliminating porpoising at lower speeds.Features:
Models available for our ATLAS™ hydraulic jack plates and Z-LOCK™ manual plates.
Models Marked "T" Have side imaging Transducer Cut-Out. Slot fits most Model SI Transducers.
Models to Fit All ATLAS™ Jack Plates (both standard and heavy duty jack plates)
Provides Improved Hole Shot
Reduces Water Drag at Take Off
Reduces Porpoising
10" Atlas Series Hot Shot™ Jack Plate Hole Shot PlateREVOLUTIONARY. SIMPLE. UNIQUE. EXCITING. These are but a few of the comments coming from users of T-H Marine's HOT SHOT™ hole shot plates. This simple-but-revolutionary plate easily attaches to the bottom of our jack plate to provide an amazing 18 to 20 percent better hole shot. That is 2 to 3 seconds faster out of the hole. Hot Shot™ does this by dramatically reducing water drag on take off as well as serving as a center trim tab. An added advantage is the ability to stay on plane and virtually eliminating porpoising at lower speeds.Features:
Models available for our ATLAS™ hydraulic jack plates and Z-LOCK™ manual plates.
Models Marked "T" Have side imaging Transducer Cut-Out. Slot fits most Model SI Transducers.
Models to Fit All ATLAS™ Jack Plates (both standard and heavy duty jack plates)
Provides Improved Hole Shot
Reduces Water Drag at Take Off
Reduces Porpoising
4" Atlas Series Hot Shot™ Jack Plate Hole Shot Plate - VeradoREVOLUTIONARY. SIMPLE. UNIQUE. EXCITING. These are but a few of the comments coming from users of T-H Marine's HOT SHOT™ hole shot plates. This simple-but-revolutionary plate easily attaches to the bottom of our jack plate to provide an amazing 18 to 20 percent better hole shot. That is 2 to 3 seconds faster out of the hole. Hot Shot™ does this by dramatically reducing water drag on take off as well as serving as a center trim tab. An added advantage is the ability to stay on plane and virtually eliminating porpoising at lower speeds.Features:
Models available for our ATLAS™ hydraulic jack plates and Z-LOCK™ manual plates.
Models Marked "T" Have side imaging Transducer Cut-Out. Slot fits most Model SI Transducers.
Models to Fit All ATLAS™ Jack Plates (both standard and heavy duty jack plates)
Provides Improved Hole Shot
Reduces Water Drag at Take Off
Reduces Porpoising
12" ATLAS™ Hole Shot Plate with Transducer Cut OutT-H Marine ATLAS™ Hydraulic Jack Plate - 12" setback AHJ-12V-DP is truly the next generation in jack plate design, built for the heaviest and most powerful V6 engines on the market today, even the big four strokes. Our innovative high tech engineered polymer rod and slot lifting design guarantees trouble free action. This plate also features the best concept in one-piece hydraulics from the most respected name in hydraulic design, providing the best of all worlds: Speed and Self contained lifting action. This pump will lift the heaviest outboard from bottom to top in less than 8 seconds.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Prop Master Prop Stop Propeller StopFeatures:
Simple to use
Securely holds prop during changing
Makes prop-changing safer
Brightly colored for greater visibility (Remember to remove propeller stop before using your boat)
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Pitch: N/A
Material: Polymer
Diameter (Inches): N/A
Box Dimensions: 2"H x 6"W x 8"L WT: 0.3 lbs
UPC: 733572201109
Steering Trim Control UnitTrim Switches on the Steering Wheel Improve Safety and Performance. This steering trim control unit is molded of black plastic with raised white letters to not only enhance boat appearance but also provide the ultimate in control of any high performance boat. The steering trim control unit mounts easily to steering wheel spokes to place engine trim control at your finger tips for maximum safety and ease of operation. The weather proof, rubber booted, push button switches combined with a black urethane coiled cord provide a unit which will provide trim control without removing hands from steering wheel.Features:
Puts trim switches on steering wheel for convenience and safety
Allows driver to keep both hands on the steering wheel
Mounts easily on steering wheel spokes
Weatherproof rubber booted switches
Rugged urethane coiled cord
Can be used for trim control or jack plate control
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Type: Switches
Box Dimensions: 2"H x 5"W x 7"L WT: 0.6 lbs
UPC: 733572001105
Transom Trim Control Push Button Trim SwitchTransom Trim Control Switch/Hydraulic Jack Plate SwitchPut a trim switch or hydraulic jack plate anywhere you want with this versatile switch. The Transom Trim Control Switch provides a weatherproof tilt control system at the stern area of the boat to facilitate placing motor support in position with one person. Switch can also be used for remote adjustment of hydraulic jack plates. The switch housing is molded black plastic with raised white letters and may be mounted on any flat surface, comes with 18" pigtail wire and installation instructions.Features:
Trim switch for outboards or stern drives
Hydraulic jack plate switch
Puts Tilt & Trim Control Anywhere
Weatherproof Control Switches
UV stable molded housing
Can Also Operate Power Jack Plates
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Additional Remote Control Unit f/2-Way Boat Alarm SystemProtects your boat and valuable equipment from theft.Features:Two Way Remote Alerts with Sound, Light & VibrationWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Sensor Quantity - Max: 1
Sensors Included: 1
Box Dimensions: 1"H x 1"W x 3"L WT: 0.05 lbs
UPC: 733572073508
HOT FOOT™ Pro - Top Load Foot Throttle for Chrysler YamahaHOT FOOT™ Pro is the ultimate upgrade for the boater looking for safety and performance features that made Hot Foot™ the foot throttle boaters demand. HOT FOOT™ Pro sports a rugged aluminum finish with great color graphics on the pedal to accent any high performance boat. The top loading feature for the throttle cable* makes HOT FOOT™ Pro easier to install and gives more foot and leg room. Standard features include a patented idle stop for the Ficht and Optimax engines, stainless steel return spring, Teflon bushings on all critical pivot points and tow clip for added security.Features:
Drive your boat like you drive your car
Improved Safety & Throttle Control
Attractive Full Color Pedal Graphics
Topside Cable Connections
Patented Idle Stop for FICHT & Optimax
Stainless Steel Hardware with Teflon Bushings
*Requires Longer Throttle Cable (Not Included)Optional Slide Mount (HFM-1-DP) available for comfort and multiple drivers.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Prop Master Propeller WrenchThe Prop Master™ is the original molded propeller wrench.This 1-1/16" six point socket style prop wrench is made of high tensile strength, indestructible nylon. It is totally resistant to fuel, sun, salt water, and other chemicals. The Prop Master™ is less expensive than metal wrenches which rattle and can cause damage to your boat. However, it has plenty of brawn to get the job done. The Prop Master™ will tighten all 1 1/16" propeller nuts without slipping or stripping. (OMC, Johnson and Evinrude, - over 40 HP, Mercury - over 50 HP) High visibility color makes it easy to locate in dark boat compartments. The Prop Master™ also has a 9/16" garboard drain plug socket on the reverse side. Will not corrode in the salt water environment.Features:
Fits All 1-1/16” Prop Nuts (40hp & up)
Rugged Nylon Resists Stripping
9/16” Garboard Drain Socket on Back
Non-Corrosive in Salt Environment
High Visibility Yellow makes wrench easy to find
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Pitch: N/A
Material: Polymer
Diameter (Inches): 0.6875
Box Dimensions: 2"H x 6"W x 16"L WT: 0.6 lbs
UPC: 733572020007
G-Force SILENCER Trolling Motor Vibration Pad - BlackThe G-Force SILENCER™ is a simple trolling motor modification that can help extend the life of your investment and improve function. Custom cut to fit both Motorguide and Minn Kota trolling motor mounts, the G-Force SILENCER™ creates a soft padded surface on your trolling motor mount that eliminates abrasive metal-on-metal contact. In addition to extending the life of trolling motor mounts, the G-Force SILENCER™ also quiets the harsh “clanking” noise associated with pulling your trolling motor out of the water. Protect your investment with the simple and quick addition of the T-H Marine G-Force SILENCER™.Features:
Extends life of trolling motor
Reduces noise and vibration
Eliminates metal-to-metal contact
Prevents harsh clanking when stowing trolling motor
Package will contain product for Motorguide and Minn Kota
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
G-Force SILENCER Trolling Motor Vibration Pad - RedThe G-Force SILENCER™ is a simple trolling motor modification that can help extend the life of your investment and improve function. Custom cut to fit both Motorguide and Minn Kota trolling motor mounts, the G-Force SILENCER™ creates a soft padded surface on your trolling motor mount that eliminates abrasive metal-on-metal contact. In addition to extending the life of trolling motor mounts, the G-Force SILENCER™ also quiets the harsh “clanking” noise associated with pulling your trolling motor out of the water. Protect your investment with the simple and quick addition of the T-H Marine G-Force SILENCER™.Features:
Extends life of trolling motor
Reduces noise and vibration
Eliminates metal-to-metal contact
Prevents harsh clanking when stowing trolling motor
Package will contain product for Motorguide and Minn Kota
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
G-Force ELIMINATOR Trolling Motor Clear/Silver Prop Nut for Minn Kota 35-70 Trolling MotorOne of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.Made to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic.Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.Key ELIMINATOR Benefits:
Machined from 6061 Billet Aluminum
O-ring dampens noise/vibration and secures nut
Wider contact area for a more stable prop
Cooling ports aid in heat dissipation
Anodized protected
No tools needed
Available in popular colors
Visually appealing
Designed and made in the U.S.A.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Deck Mounted Seat SlideSwivl-Eze has the boating experience to deliver all the kinds of accessories you want.Features:
Seating accessories for retrofitting and improving
Adapters to change a post installation or swivel location
Mounts directly to the boat deck
1-5/8" total height
Constructed of strong aluminum
Convenient front control operation
For use on stamped and welded seat mounts or cast seat mounts not originally equipped with slider
SWIVL-EZE 7x7 Zinc Plated Steel 3/4" Pin Base7" x 7" Lock'N-Pin 3/4" Pin Base SP-67739-T is zinc plated steel. It features a threaded bronze bushing for secure fit and durability. Easy to install with six screws or bolts through the deck. Add more seating to your pontoon, fishing or cruising boat with Attwood seating products. Attwood develops high value, engineered marine products to make life on the water easier to enjoy. Made to meet the demands of boat builders and distribution partners, our products are extensively tested on-site in our lab to provide worry-free boating under all conditions.Features:
7" x 7" Lock'N-Pin 3/4" Pin Base is a zinc plated steel top plate.
Works with a threaded pedestal pin and features an acetal bushing for secure fit and durability
Six bolt or screw attachment (hardware not included)
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
