Heavy Duty Group 24 Battery TrayThis heavy-duty battery tray is made of non-corrosive black plastic. The tray includes an adjustable-height crossbar and stainless steel retaining bolts.Features:
Meets ABYC Standard E-10 and U.S. Coast Guard requirements
Install with #10 fasteners
Specifications:
Inside Dimensions: 10-7/16" L x 6-7/8" W
Battery Series: 24/24M
Quick Guide (pdf)
Heavy Duty Group 27 Battery TrayThis heavy-duty battery tray is made of non-corrosive black plastic. The tray includes an adjustable-height crossbar and stainless steel retaining bolts.Features:
Meets ABYC Standard E-10 and U.S. Coast Guard requirements
Install with #10 fasteners
Specifications:
Inside Dimensions: 12" L x 6-7/8" W
Battery Series: 27/27M
Quick Guide (pdf)
Low Profile Group 27 Adjustable Battery TrayThis battery tray is made of heavy-duty, non-corrosive black plastic. The tray includes an adjustable-height crossbar and two retaining bolts.Features:
Meets ABYC Standard E-10 and U.S. Coast Guard requirements
Patented design
Install with #10 fasteners
Specifications:
Battery Series: 27/27M
Inside Dimensions: 12-5/8" x 7-1/4" x 8-1/2"
Quick Guide (pdf)
T-H FLEX™ 1-1/4" Expandable Braided Sleeving - 50' RollT-H FLEX™ is a lightweight, braided jacketing for bundling and protecting wires, cables and hoses. Braided from high temperature yarns, T-H FLEX™ offers total protection for wire and cable assemblies. The unique expansion characteristics makes T-H FLEX™ easy to slip on. Only a few sizes are needed to cover a large diameter range, since each size of T-H FLEX™ expands up to four times its normal diameter. The sleeving cuts easily and cleanly with a hot knife and once installed, will beautify and protect any wire, hose or cable application.Features:
Lightweight Protective Sleeving
Protects Wire, Cables and Hoses
Braided from High Temperature Yarns
Chemical Resistant
Simplifies and beautifies any rigging application
Specifications:
Type: Misc
Box Dimensions: 6"H x 9"W x 10"L WT: 1.45 lbs
UPC: 733572036756
Marine 12-Volt Power Outlet
Marine quality 12-volt outlet
Designed to for replacing or adding outlets in your boat RV or camper
Surface mount
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
PowerGuard PRO Battery BoxExperience the difference between PowerGuard PRO Series Battery Protection
Upward-facing vents let gases out while reducing water in-take by 94% - vs. PowerGuard 27 Series
Polypropylene composite material is impervious to acid leaks and other external factors
Engineered spill channels direct water away from the battery
With PowerGuard PRO, the battery is always within reach
Folding entry panels provide easy access to the battery terminals without the need to remove the mounting strap
A versatile bidirectional design allows contact from any angle
Ergonomic handles provide more comfort when transporting the battery
PowerGuard PRO takes security seriously
Reinforced mounting hardware ensures the battery and box stay anchored
Spacer blocks are removable to fit Group 24, 27, and 31 batteries
The snap-locking lid gives confidence that the battery will remain secure
Specifications:
Dimensions with Lid Installed - Internal Dimensions (L x W x H): 13-1/8" x 7" x 11"
Outside Dimensions (L x W x H): 21" x 11-1/4" x 11-1/2"
Color/Style: Black/Vented
Quick Guide (pdf)
27 Series Battery Holder Tray with Stainless Buckled StrapSecure and protect your boat's battery with the Battery Holder Tray with Stainless Buckle. This innovative tray provides a sturdy and reliable housing for your battery, ensuring it stays in place even during rough rides and turbulent waters. The stainless steel buckle adds an extra layer of security, preventing any unwanted movement and ensuring your battery stays firmly in place.Crafted from high-quality materials, this battery holder tray is built to withstand the harsh marine environment, offering long-lasting durability and corrosion resistance. The user-friendly design allows for easy installation and removal, making battery maintenance a breeze.Features:
Dimensions: 12 1/2" L (in) x 7" W (in) x 1" H
Stainless steel buckle provides maximum strength and prevents movement.
Crafted from high-quality materials for long-lasting durability and corrosion resistance.
User-friendly design allows for easy installation and maintenance.
24 Series Battery Holder Tray with Stainless Buckled StrapSecure and protect your boat's battery with the Battery Holder Tray with Stainless Buckle. This innovative tray provides a sturdy and reliable housing for your battery, ensuring it stays in place even during rough rides and turbulent waters. The stainless steel buckle adds an extra layer of security, preventing any unwanted movement and ensuring your battery stays firmly in place.Crafted from high-quality materials, this battery holder tray is built to withstand the harsh marine environment, offering long-lasting durability and corrosion resistance. The user-friendly design allows for easy installation and removal, making battery maintenance a breeze.Features:
Dimensions: 10 5/8" L (in) x 7" W (in) x 1" H
Stainless steel buckle provides maximum strength and prevents movement.
Crafted from high-quality materials for long-lasting durability and corrosion resistance.
User-friendly design allows for easy installation and maintenance.
31 Series Battery Holder Tray with Stainless Buckled StrapSecure and protect your boat's battery with the Battery Holder Tray with Stainless Buckle. This innovative tray provides a sturdy and reliable housing for your battery, ensuring it stays in place even during rough rides and turbulent waters. The stainless steel buckle adds an extra layer of security, preventing any unwanted movement and ensuring your battery stays firmly in place.Crafted from high-quality materials, this battery holder tray is built to withstand the harsh marine environment, offering long-lasting durability and corrosion resistance. The user-friendly design allows for easy installation and removal, making battery maintenance a breeze.Features:
Dimensions: 13" L (in) x 7" W (in) x 1" H
Stainless steel buckle provides maximum strength and prevents movement.
Crafted from high-quality materials for long-lasting durability and corrosion resistance.
User-friendly design allows for easy installation and maintenance.
T-H FLEX™ 2" Expandable Braided Sleeving - 50' RollT-H FLEX™ is a lightweight, braided jacketing for bundling and protecting wires, cables and hoses. Braided from high temperature yarns, T-H FLEX™ offers total protection for wire and cable assemblies. The unique expansion characteristics makes T-H FLEX™ easy to slip on. Only a few sizes are needed to cover a large diameter range, since each size of T-H FLEX™ expands up to four times its normal diameter. The sleeving cuts easily and cleanly with a hot knife and once installed, will beautify and protect any wire, hose or cable application.Features:
Lightweight Protective Sleeving
Protects Wire, Cables and Hoses
Braided from High Temperature Yarns
Chemical Resistant
Simplifies and beautifies any rigging application
Specifications:
Type: Misc
Box Dimensions: 6"H x 9"W x 10"L WT: 2 lbs
UPC: 733572036855
Heavy-Duty Battery Tray - 29/31 Battery SeriesThis heavy-duty Attwood battery tray is for a group 29 or group 31 battery and is made of non-corrosive black plastic.Features:
Includes an adjustable-height crossbar and stainless steel retaining bolts
Meets ABYC Standard E-10 and U.S. Coast Guard requirements
Install with #10 fasteners
Specifications:Inside Dimensions (L x W): 13-1/16" L x 6-7/8" W Quick Guide (pdf)
T-H FLEX™ 3/4" Expandable Braided Sleeving - 100' RollT-H FLEX™ is a lightweight, braided jacketing for bundling and protecting wires, cables and hoses. Braided from high temperature yarns, T-H FLEX™ offers total protection for wire and cable assemblies. The unique expansion characteristics makes T-H FLEX™ easy to slip on. Only a few sizes are needed to cover a large diameter range, since each size of T-H FLEX™ expands up to four times its normal diameter. The sleeving cuts easily and cleanly with a hot knife and once installed, will beautify and protect any wire, hose or cable application.Features:
Lightweight Protective Sleeving
Protects Wire, Cables and Hoses
Braided from High Temperature Yarns
Chemical Resistant
Simplifies and beautifies any rigging application
Specifications:
Type: Misc
Box Dimensions: 6"H x 9"W x 10"L WT: 1.75 lbs
UPC: 733572036701
T-H FLEX™ 1/2" Expandable Braided Sleeving - 100' RollT-H FLEX™ is a lightweight, braided jacketing for bundling and protecting wires, cables and hoses. Braided from high temperature yarns, T-H FLEX™ offers total protection for wire and cable assemblies. The unique expansion characteristics makes T-H FLEX™ easy to slip on. Only a few sizes are needed to cover a large diameter range, since each size of T-H FLEX™ expands up to four times its normal diameter. The sleeving cuts easily and cleanly with a hot knife and once installed, will beautify and protect any wire, hose or cable application.Features:
Lightweight Protective Sleeving
Protects Wire, Cables and Hoses
Braided from High Temperature Yarns
Chemical Resistant
Simplifies and beautifies any rigging application
Specifications:
Type: Misc
Box Dimensions: 6"H x 9"W x 10"L WT: 1.5 lbs
UPC: 733572036657
42" Battery Strap with Stainless Steel BuckleReplacement straps for T-H Marine battery trays. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Positions: N/A
Lockable: No
Continuous Amperage: N/A
AFD: No
Box Dimensions: 1"H x 1"W x 5"L WT: 0.15 lbs
UPC: 733572009453
T-H FLEX™ 1-1/2" Expandable Braided Sleeving - 50' RollT-H FLEX™ is a lightweight, braided jacketing for bundling and protecting wires, cables and hoses. Braided from high temperature yarns, T-H FLEX™ offers total protection for wire and cable assemblies. The unique expansion characteristics makes T-H FLEX™ easy to slip on. Only a few sizes are needed to cover a large diameter range, since each size of T-H FLEX™ expands up to four times its normal diameter. The sleeving cuts easily and cleanly with a hot knife and once installed, will beautify and protect any wire, hose or cable application.Features:
Lightweight Protective Sleeving
Protects Wire, Cables and Hoses
Braided from High Temperature Yarns
Chemical Resistant
Simplifies and beautifies any rigging application
Specifications:
Type: Misc
Box Dimensions: 6"H x 9"W x 10"L WT: 1.7 lbs
UPC: 733572036800
Battery Maintenance ChargerFully-automatic on-board charger provides a 1.5 Amp maintenance charge. Designed to maintain 12V batteries. Water resistant with safety features like short circuit connection and reverse polarity protection.
LED status indicators
1.5 amp
12V
1 bank operation
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Charger Output Voltage: 12v
AFD: No
Charging Banks: 1
Lockable: No
Portable: Yes
Charger Input - Voltage: 120v
Box Dimensions: 4"H x 5"W x 8"L WT: 1.69 lbs
UPC: 022697119001
Group 24 Battery Tray with StrapsA simple-to-install battery holder that fits into limited spaces. This tray is for batteries up to 10-1/2 inches in height. Provide a simple installation for changing or replacing batteries.Features:
The polypropylene hold-down strap has a positive-locking, quick-disconnect buckle
Molded base mounts with four #10 Panhead fasteners
Specifications:Inside Dimensions: 7" L x 11" W Quick Guide (pdf)
Group 27 Battery Tray with StrapsA simple-to-install battery holder that fits into limited spaces. This tray is for batteries up to 10-1/2 inches in height. Provide a simple installation for changing or replacing batteries.Features:
The polypropylene hold-down strap has a positive-locking, quick-disconnect buckle
Molded base mounts with four #10 Panhead fasteners
Specifications:Inside Dimensions: 12-3/8" L x 7-1/8" W Quick Guide (pdf)
Low Profile Group 24 Adjustable Battery TrayThis battery tray is made of heavy-duty, non-corrosive black plastic. The tray includes an adjustable-height crossbar and two retaining bolts.Features:
Meets ABYC Standard E-10 and U.S. Coast Guard requirements
Patented design
Install with #10 fasteners
Specifications:
Battery Series: 24/24M
Inside Dimensions: 10-5/8" x 7-1/4" x 8-1/2"
Quick Guide (pdf)
29/31 Battery Tray with StrapsA simple-to-install battery holder that fits into limited spaces. This tray is for batteries up to 10-1/2 inches in height. Provide a simple installation for changing or replacing batteries.Features:
The polypropylene hold-down strap has a positive-locking, quick-disconnect buckle
Molded base mounts with four #10 Panhead fasteners
Specifications:Inside Dimensions: 12-7/8" L x 7" W Quick Guide (pdf)
T-H FLEX™ 1/4" Expandable Braided Sleeving - 100' RollT-H FLEX™ is a lightweight, braided jacketing for bundling and protecting wires, cables and hoses. Braided from high temperature yarns, T-H FLEX™ offers total protection for wire and cable assemblies. The unique expansion characteristics makes T-H FLEX™ easy to slip on. Only a few sizes are needed to cover a large diameter range, since each size of T-H FLEX™ expands up to four times its normal diameter. The sleeving cuts easily and cleanly with a hot knife and once installed, will beautify and protect any wire, hose or cable application.Features:
Lightweight Protective Sleeving
Protects Wire, Cables and Hoses
Braided from High Temperature Yarns
Chemical Resistant
Simplifies and beautifies any rigging application
Specifications:
Type: Misc
Box Dimensions: 6"H x 9"W x 10"L WT: 0.85 lbs
UPC: 733572036602
48" Zippered Rigging Sleeve - BlackProtect your cables and hoses with this easy to remove rigging sleeve. Made of rugged Sunbrella® fabric, this sleeve will withstand the elements and resist fading. Easily zips on and off to access cables of hoses when needed. Ends are secured with cable ties sewn into pockets.Features:
Zips On and Off to Protect Cables and Hoses
Rugged Sunbrella® – Weather & UV Resistant
Ends are Secured with Cable Ties
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Type: Misc
Box Dimensions: 4"H x 6"W x 9"L WT: 0.42 lbs
UPC: 733572041606
