White Plastic 90 Degree Thru-Hull Connector - 3/4" Inner Diameter90° Thru-Hulls are ideal for tight installations, such as livewell overflow drains. The angled design also eliminates hose kinking.Specifications:
Fits Hose Size: (inch) 3/4"inner diameter
Max Hull Thickness: (inch) 1"
Flange Diameter: (inch) 1-1/2"
Installation Hole Size: (inch) 1"
Drain Plug: (inch) 1/2"
Color: White
*Plastic Thru-Hull Connectors are designed for installation above the water line only Specifications:
Hose Size: 3/4"
Material: Plastic
Box Dimensions: 1"H x 2"W x 3"L WT: 0.2 lbs
UPC: 022697387738
Quick Guide (pdf)
T-Handle Brass Drain Plug - 1" DiameterThe T-Handle Drain Plugs are simply operated by a clockwise and counterclockwise turn of the T-handle, which expands and releases the drain plug.Features:
Handle: Brass
For 1" diameter drains
*Sold as an Individual Specifications:
Construction: Brass
Box Dimensions: 1"H x 2"W x 6"L WT: 0.1 lbs
UPC: 022697752673
Quick Guide (pdf)
Snap-Handle Stainless Steel Drain Plug - 1" DiameterA clockwise turn of the handle tightens the plug in its tube, and the handle flips down to lock.Features:
Handle: Stainless Steel
For 1" diameter drains
*Sold as an Individual Specifications:
Construction: Stainless Steel
Box Dimensions: 1"H x 3"W x 7"L WT: 0.5 lbs
UPC: 022697752079
Quick Guide (pdf)
Stainless Steel Thru-Hull Standard Straight Barbed - 3/4" Inner DiameterPolish your image with these beautiful, durable stainless steel fittings. Why specify plastic parts when these fittings will last the life of the boat?Rugged Stainless Construction:
Cast from certified Enhanced 316 Stainless Steel alloy for strength and lifetime corrosion-resistance
All visible areas are polished to a mirror finish, then passivate each part for additional protection
Thick steel sidewalls withstand continual stress and hose flexing
Faster, Simpler Installation:
Each Thru-Hull is available with a new silicone gasket
A channel under the flange holds a bead of sealant, making it easier to apply a trouble-free seal
All models have wrench flats or an end notch to hold as a gripping surface; one installer can tighten all connections from inside the hull
The barbed tail ends provide plenty of room to hold multiple clamps
Stainless Steel Straight Thru-Hulls, BarbedStandard Thread model has a full-length thread for thick hulls and easy tighteningSpecifications:
Hose size: (inch) 3/4" inner diameter
Flange Diameter: (inch) 1-7/8"
Thread O.D. (outside diameter): (inch) 1"
Thread Length: (inch) 2"
Barb Length: (inch) 1-1/4"
Total Length: (inch) 3-3/4"
Install Hole Saw Size: (inch) 1-1/8"
Thread NPSM: (inch) 3/4"
Max Hull Thickness: (inch) 1-5/8"
*Stainless Steel Thru-Hull Connectors are designed for installation above the water line only Specifications:
Hose Size: 3/4"
Material: Stainless Steel
Box Dimensions: 2"H x 3"W x 6"L WT: 0.6 lbs
UPC: 022697665478
Quick Guide (pdf)
Livewell/Bailer Drain Plug - 1/2"A clockwise turn of the handle tightens the plug and the lever flips down to lock. This plug is ideal for livewell drains.Features:
Cam-action neoprene plugs snap shut to form a stopper for livewells/baitwells
Brass snaps and plates
1/2" inner diameter thru-hull
*Not for use with chemicals or fuels Specifications:
Construction: Brass
Box Dimensions: 1"H x 2"W x 5"L WT: 0.1 lbs
UPC: 022697753335
Quick Guide (pdf)
Snap-Handle Brass Drain Plug - 1" DiameterA clockwise turn of the handle tightens the plug in its tube, and the handle flips down to lock.Features:
Handle: Brass
For 1" diameter drains
*Sold as an Individual Specifications:
Construction: Brass
Box Dimensions: 2"H x 3"W x 6"L WT: 0.1 lbs
UPC: 022697752475
Quick Guide (pdf)
Stainless Steel Thru-Hull Standard Straight Barbed - 1-1/2" Inner DiameterPolish your image with these beautiful, durable stainless steel fittings. Why specify plastic parts when these fittings will last the life of the boat?Rugged Stainless Construction:
Cast from certified Enhanced 316 Stainless Steel alloy for strength and lifetime corrosion-resistance
All visible areas are polished to a mirror finish, then passivate each part for additional protection
Thick steel sidewalls withstand continual stress and hose flexing
Faster, Simpler Installation:
Each Thru-Hull is available with a new silicone gasket
A channel under the flange holds a bead of sealant, making it easier to apply a trouble-free seal
All models have wrench flats or an end notch to hold as a gripping surface; one installer can tighten all connections from inside the hull
The barbed tail ends provide plenty of room to hold multiple clamps
Stainless Steel Straight Thru-Hulls, BarbedStandard Thread model has a full-length thread for thick hulls and easy tighteningSpecifications:
Hose size: (inch) 1-1/2" inner diameter
Flange Diameter: (inch) 3"
Thread O.D. (outside diameter): (inch) 1-7/8"
Thread Length: (inch) 2-1/2"
Barb Length: (inch) 1-1/4"
Total Length: (inch) 4-1/8"
Install Hole Saw Size: (inch) 2"
Thread NPSM: (inch) 1-1/2"
Max Hull Thickness: (inch) 1-7/8"
*Stainless Steel Thru-Hull Connectors are designed for installation above the water line only Specifications:
Hose Size: 1-1/2"
Material: Stainless Steel
Box Dimensions: 3"H x 5"W x 8"L WT: 1.55 lbs
UPC: 022697665515
Quick Guide (pdf)
Tsunami MK2 Manual Bilge Pump - T1200 - 1200 GPH & 24VThe Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump.Easy Installation & Service
GPH (Gallons Per Hour): 1200
90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation
Backward compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps
External mounting feet and integrated outlet reduces time and effort
Service pump cartridges from hard-to-reach areas using only one hand
Specifications:
Rated Volts DC: 24V
Fuse Size: 2 Amp
Wire Length: (inch) 29" / (mm) 735
Hose Diameter: (inch) 1" and 1-1/8"
*Must be used with appropriate Tsunami outlet Specifications:
Gallons Per Hour: 1200 GPH
Gallons Per Minute: 20 GPM
Operation: Non-Automatic
Outlet Size: 1" or 1-1/8"
Type: Electric
Volts: 24v
Box Dimensions: 4"H x 5"W x 7"L WT: 1.2 lbs
UPC: 022697024190
Quick Guide (pdf)
Stainless Steel Thru-Hull Short Straight Barbed - 1" Inner DiameterPolish your image with these beautiful, durable stainless steel fittings. Why specify plastic parts when these fittings will last the life of the boat?Rugged Stainless Construction:
Cast from certified Enhanced 316 Stainless Steel alloy for strength and lifetime corrosion-resistance
All visible areas are polished to a mirror finish, then passivate each part for additional protection
Thick steel sidewalls withstand continual stress and hose flexing
Faster, Simpler Installation:
Each Thru-Hull is available with a new silicone gasket
A channel under the flange holds a bead of sealant, making it easier to apply a trouble-free seal
All models have wrench flats or an end notch to hold as a gripping surface; one installer can tighten all connections from inside the hull
The barbed tail ends provide plenty of room to hold multiple clamps
Stainless Steel Straight Thru-Hulls, BarbedShort Thread is a more compact size, which allows installation near corners and in confined areasSpecifications:
Hose size: (inch) 1" inner diameter
Flange Diameter: (inch) 2-1/4"
Thread O.D. (outside diameter): (inch) 1-3/8"
Thread Length: (inch) 1-1/8"
Barb Length: (inch) 1"
Total Length: (inch) 2-1/2"
Install Hole Saw Size: (inch) 1-1/2"
Thread NPSM: (inch) 1"
Max Hull Thickness: (inch) 5/8"
*Stainless Steel Thru-Hull Connectors are designed for installation above the water line only Specifications:
Hose Size: 1"
Material: Stainless Steel
Box Dimensions: 2"H x 3"W x 3"L WT: 0.6 lbs
UPC: 022697665423
Quick Guide (pdf)
Stainless Steel Thru-Hull Short Straight Barbed - 3/4" Inner DiameterPolish your image with these beautiful, durable stainless steel fittings. Why specify plastic parts when these fittings will last the life of the boat?Rugged Stainless Construction:
Cast from certified Enhanced 316 Stainless Steel alloy for strength and lifetime corrosion-resistance
All visible areas are polished to a mirror finish, then passivate each part for additional protection
Thick steel sidewalls withstand continual stress and hose flexing
Faster, Simpler Installation:
Each Thru-Hull is available with a new silicone gasket
A channel under the flange holds a bead of sealant, making it easier to apply a trouble-free seal
All models have wrench flats or an end notch to hold as a gripping surface; one installer can tighten all connections from inside the hull
The barbed tail ends provide plenty of room to hold multiple clamps
Stainless Steel Straight Thru-Hulls, BarbedShort Thread is a more compact size, which allows installation near corners and in confined areasSpecifications:
Hose size: (inch) 3/4" inner diameter
Flange Diameter: (inch) 1-7/8"
Thread O.D. (outside diameter): (inch) 1"
Thread Length: (inch) 1"
Barb Length: (inch) 1"
Total Length: (inch) 2-1/2"
Install Hole Saw Size: (inch) 1-1/8"
Thread NPSM: (inch) 3/4"
Max Hull Thickness: (inch) 5/8"
*Stainless Steel Thru-Hull Connectors are designed for installation above the water line only Specifications:
Hose Size: 3/4"
Material: Stainless Steel
Box Dimensions: 2"H x 3"W x 6"L WT: 0.4 lbs
UPC: 022697665416
Quick Guide (pdf)
Tsunami MK2 Manual Bilge Pump - T1200 - 1200 GPH & 12VThe Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump.Easy Installation & Service
GPH (Gallons Per Hour): 1200
90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation
Backward compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps
External mounting feet and integrated outlet reduces time and effort
Service pump cartridges from hard-to-reach areas using only one hand
Specifications:
Rated Volts DC: 12V
Fuse Size: 5 Amp
Wire Length: (inch) 29" / (mm) 735
Hose Diameter: (inch) 1" and 1-1/8"
*Must be used with appropriate Tsunami outlet Specifications:
Gallons Per Hour: 1200 GPH
Gallons Per Minute: 20 GPM
Operation: Non-Automatic
Outlet Size: 1" or 1-1/8"
Type: Electric
Volts: 12v
Box Dimensions: 4"H x 5"W x 7"L WT: 1.25 lbs
UPC: 022697024152
Quick Guide (pdf)
Tsunami MK2 Manual Bilge Pump - T800 - 800 GPH & 24VThe Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump.Easy Installation & Service
GPH (Gallons Per Hour): 800
90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation
Backward compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps
External mounting feet and integrated outlet reduces time and effort
Service pump cartridges from hard-to-reach areas using only one hand
Specifications:
Rated Volts DC: 24V
Fuse Size: 2 Amp
Wire Length: (inch) 29" / (mm) 735
Hose Diameter: (inch) 3/4" and 1"
*Must be used with appropriate Tsunami outlet Specifications:
Gallons Per Hour: 800 GPH
Operation: Non-Automatic
Outlet Size: 3/4" or 1"
Type: Electric
Volts: 24v
Box Dimensions: 4"H x 5"W x 7"L WT: 1.2 lbs
UPC: 022697024121
Quick Guide (pdf)
Garboard Drain Plug Cast BronzeAttwood's Bronze Garboard Drain Plug reliably provides bilge drainage when hauling out, and it seals securely when not draining. It has machined and tapered pipe threads to ensure a watertight plug fit, and the nut can be removed with a wrench or pliers. This drain plug has a 3/8-inch neck depth and a ½-inch NOT drain. It installs easily and securely using #8 screws in 3 countersunk holes.
Sahara MK2 S1200 Bilge Pump 1200 GPH - 24V - AutomaticEngineered for extended service life, these pumps feature a cool-running design and quality components, including permanent magnet motors, stainless steel shafts, and steel-reinforced seals.Features:
Sahara Mk2 is the only automatic bilge pump that eliminates air-locks
Patented X-Air™ Impeller ejects trapped air in the pump and pipework.
Sahara Mk2 is the easiest automatic bilge pump to install and service
External mounting feet and integrated outlet reduces time and effort.
Universal mounting pattern makes replacement simple.
Service pump cartridge from hard-to-reach areas using only one hand.
Sahara Mk2 is the most reliable automatic bilge pump in freshwater and saltwater applications
Attwood’s SteadySwitch™ reduces cycling and extends the life of the pump.
40% better protection against water ingress and electrolysis - vs. MK1.
2X better protection against water ingress and electrolysis - than the leading competition.
Universal mounting patterns make it backwards compatible with the most popular bilge pumps on the market.
Specifications:
Volts: 24v
Type: Electric
Gallons Per Hour: 1200 GPH
Operation: Automatic
Outlet Size: 1" or 1-1/8"
Box Dimensions: 4"H x 6"W x 7"L WT: 1.35 lbs
UPC: 022697023490
Owner's Manual (pdf)Brochure (pdf)
Flow-Max™ Ball Scupper - ClearReplace your old worn-out flapper scupper with our new Flow-Max™ positive sealing ball scupper. A larger exit hole allows 70% more water drainage than its nearest competitor. Multiple mounting holes make retrofits quick and easy - no filling holes or re-drilling. A neutral buoyancy ball ensures the ball won't float up and break the seal. Meets all ABYC standards.The easy twist-off design makes cleaning debris a snap. Simply twist counterclockwise to remove the ball cavity, clean out and twist back on. Stainless steel security pin provided for added safety.Features:
Replaces worn out flapper scuppers
70% more drainage than competitive models
Twist off for easy cleaning
Retrofits all hole patterns
The seal is slotted to fit over 1-1/4" motor well tubes
3” Diameter x 2-1/2” H
The Flow Max Scupper only comes with one screw. The screws that screw it to the boat do not come with it. They will be different for every boat depending on the hull thickness but you will need a flat head screw. Screw included is a #4 x 1/4" Phillips Pan Head Stainless Steel Screw.
Double Barb Inline Scupper Check Valve - 1-1/2" - BlackA great solution to provide a scupper check valve in the drain line. Allows use of standard thru-hull fittings in the cockpit and on the hull exterior. Features:
Prevents Backwash
Chemical Resistant Materials
Thermo-Plastic Flapper
Specifications:
Construction: Polymer
Box Dimensions: 4"H x 6"W x 9"L WT: 0.35 lbs
UPC: 733572062502
Double Barb Inline Scupper Check Valve - 3/4" - BlackA great solution to provide a scupper check valve in the drain line. Allows use of standard thru-hull fittings in the cockpit and on the hull exterior. Features:
Prevents Backwash
Chemical Resistant Materials
Thermo-Plastic Flapper
Specifications:
Construction: Polymer
Box Dimensions: 4"H x 6"W x 9"L WT: 0.3 lbs
UPC: 733572064957
Plastic Thru-Hull Fitting - 1-1/2" - WhiteThese thru-hulls are made with a durable, thermoplastic construction which prevents electrolysis.Caution: Thru-Hull connectors are designed for installation above the water line only.Specifications:
Fits Hose Size: 1-1/2" I.D.
Stem Length: 3-1/2"
Max. Hull Thickness: 1-1/4"
Flange Diameter: 3"
Installation Hose Size: 1-7/8" to 2"
Construction: Polypropylene
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Hose Size: 1-1/2"
Material: Plastic
Box Dimensions: 4"H x 6"W x 9"L WT: 0.2 lbs
UPC: 022697387530
Cockpit Drain - No ScreenFor use with 1-1/2" I.D. hose as part of a self-bailing cockpit system. Features short stem and narrow flange for installing through cockpits. Polypropylene construction.Specifications:
Stem Length: 3-3/4"
Max. Hull Thickness: 1-1/2"
Flange Diameter: 2-1/8"
Installation Hole Size: 1-7/8"
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Aft-Deck ShowerInstall flush in the transom or under the gunwale. Includes hinged cover and replaceable sprayer head. Fixtures are corrosion-resistant. Housing and cover are made of high-impact, UV resistant, engineering-grade plastic and are pre-drilled for six #8 fasteners. Comes with 6' hose, shut-off and hot/cold mixing controls. Connects to freshwater system for showeringWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Type: Misc
Box Dimensions: 5"H x 5"W x 11"L WT: 1.91 lbs
UPC: 022697413147
Quick Guide (pdf)
3-Way Auto/Off/Manual Bilge Pump SwitchPart #: 7615A3Panel-mounted rocker switches for use with pump that draws 10 amps or less.Features:
1/4" spade terminals
6-volt through 32-volt D.C. only
10 amps maximum
Plate is 2-13/16" x 1-7/8"
Hole size is 1-1/2" x 7/8"
Caution: Bilge pump switches are not external ignition protected.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Volts: 12/24v
Type: Switches
Box Dimensions: 1"H x 3"W x 5"L WT: 0.1 lbs
UPC: 022697761590
Quick Guide (pdf)
Automatic Bilge Switch S3 SeriesPart #: 4801-7Incorporates a proprietary Electronic Sensing technology to detect bilge water levels and trigger pump activation and has been engineered to operate in any bilge water mixture consistently without failure. Your pump won't be exposed to continuous cycling as the S3 switch can easily distinguish splashing bilge water, chemicals, sludge build up or foam and comes equipped with fully sealed electronics that are completely protected from water or chemical damage. For added convenience, the bilge switch can be mounted on the floor of the bilge directly to a stringer wall or alongside the basket of the pump without added components or brackets. The S3 Series switch is also directly compatible with all competitive products and free of moving parts that can jam up, break or wear out over time.Features:
12V
15 Amp
36" Wire
5-Year Warranty
Specifications:
Volts: 12v
Type: Switches
Box Dimensions: 2"H x 3"W x 7"L WT: 0.4 lbs
UPC: 022697048011
Quick Guide (pdf)Brochure (pdf)
Float Switch w/CoverPart #: 4201-7Converts bilge pumps to fully automatic operation. Maximum amp draw is 12 amps (at 12-volt D.C.) or 6-amps (at 24-Volts D.C.). Features a compact, low profile design that mounts on any surface from a horizontal up to a 24" angle. Incorporates a reliable and affordable mechanical switch that actuates pump motor at 2" water level. Wire leads do not flex or hinge with the float as on some competitive models. Integral cover dampens bilge sloshing to reduce pump cycling, and prevents debris interference. Sealed switch mechanism resists moisture, fume-ignition, and electrical shock. Contains no mercury, which is listed as a health hazard and "Persistent Toxic Substance" in over 26 states.Float switch installs independently or directly onto the rear slots of the V-Series pump bracket. Features a convenient test knob to test pump operation.Features:
36" Wire
12V and 24V
CE Rated
Includes Cover
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Volts: 12/24v
Type: Switches
Box Dimensions: 2"H x 6"W x 9"L WT: 0.5 lbs
UPC: 022697420176
Quick Guide (pdf)
