Fold-N-Stow Fishing Net - SmallFold down for convenient and compact storage or extend for added reach with this Attwood Fold-N-Stow Fishing Net. This net is ideal for trout fishing. Features:
Constructed of durable, knot-free netting
A flip of the handle opens and locks the net into place
Easily pull back the trigger, and the net collapses down into a stowable size
Specifications:
Size: Small
Fully Extended (L x W x D): 24" x 12.5" x 10"
Specifications:
Length (Inches): 24"
Width: 12.5"
Box Dimensions: 1"H x 5"W x 21"L WT: 0.85 lbs
UPC: 022697127723
Quick Guide (pdf)
Johnson/Evinrude Fuel Line Kit - 3/8" Diameter x 6' Length with Fuel Demand ValveThis EPA-certified Attwood Johnson/Evinrude Fuel Line Kit reliably delivers fuel to your Johnson or Evinrude engine and provides the ultimate in performance, safety, and value. The kit comes with a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C. Also, the kit includes a multi-layer low-permeation primer bulb and a Fuel Demand Value that eliminates engine flooding and spillage by preventing pressurized fuel from reaching the engine.Features:
These Attwood Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and engine end hose fitting 8889LP6
In-Line Fuel Demand Valve
Hose and tank fittings come with pre-applied thread sealant
Reliably delivers fuel to your Johnson or Evinrude engine
*This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines Specifications:
ID Diameter (inches): 3/8"
Length (Feet): 6'
Box Dimensions: 2"H x 9"W x 13"L WT: 1.35 lbs
UPC: 022697938053
Quick Guide (pdf)
LightArmor Masthead 36" Anchor Light for Use With PowerbaseThis anchor/masthead light is for use on power-driven vessels up to 65.4 feet (20 meters).Features:
36" Masthead/Anchor Light
LED rated for 50,000 hours of life
Shock-proof, corrosion-proof, and water-proof electronics
Three nautical mile visibility, 360°
12 volts / 1 amp
*Compatible only with the Attwood PowerBase (6100-LT-7) Specifications:
LED: Yes
Lens Color: White
Visible Range (Miles): 3
Voltage - Input Range (Volts): 12
Box Dimensions: 3"H x 5"W x 38"L WT: 0.7 lbs
UPC: 022697024428
Quick Guide (pdf)
Transducer Mounting PlateFeatures:
Marine-grade polymer plate will not warp or corrode
Premium materials; unaffected by UV rays
Mounts easily with only 2 screws
All hardware included
Specifications:
Type: Mounting Brackets
Box Dimensions: 1"H x 4"W x 12"L WT: 1 lbs
UPC: 022697941107
In-Line Fuel Overflow ProtectorThe fuel vent line surge protector helps avoid refueling spills because the surge-free line causes automatic fuel nozzles to shut off as the tank fills.With non-automatic nozzles, the surge protector causes a gurgling sound to indicate that the tank is full.Incorporates a ball-style check valve with internal baffling.Features:
Meets ABYC Standard H-24
Install in-line with traditional tank vent systems that use standard 5/8" ID vent hose
Compact size and operates in any orientation within 45° of vertical
Withstands oil, gas, alcohol-blended fuels
Includes 2 hose clamps for installation in the vent hose
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
500 GPH Shower Sump MK2 System - 12VAttwood’s shower sump systems deliver the performance you’ve been asking for. Choose from standard or large box sizes. They offer fast water flow into and out of the sump. The lid snaps into place to allow quick installation (and removal for cleaning) and includes a gasket to seal the sump box against overflow. The sump box even includes an air vent to prevent airlocks. It meets or exceeds all applicable standards of the ABYC and USCG.Specifications:
Amp Draw: 1.4
500 GPH
Rated Voltage: 12V
Fuse Size: 3A
Outlet Hose Size: 3/4" I.D.
Wire/Connector: 22" wire
800 GPH Shower Sump MK2 System - 12VAttwood’s shower sump systems deliver the performance you’ve been asking for. Choose from standard or large box sizes. They offer fast water flow into and out of the sump. The lid snaps into place to allow quick installation (and removal for cleaning) and includes a gasket to seal the sump box against overflow. The sump box even includes an air vent to prevent airlocks. It meets or exceeds all applicable standards of the ABYC and USCG.Specifications:
800 GPH
Amp Draw: 2.5
Rated Voltage: 12V
Fuse Size: 5A
Outlet Hose Size: 3/4" I.D.
Wire/Connector: 22" wire
Service Kit for S1200 Bilge PumpsSpecifications:
Outlet Diameter: 1" (25mm) & 1-1/8" (28mm)
Compatible with Tsunami Bilge Mk2
Kit includes (1 each):
90-degree outlet
Straight outlet
Washer
Non-return/check valve
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Service Kit for S500 & S800 Bilge PumpsSpecifications:
Outlet Diameter: 3/4" (19mm) & 1" (25mm)
Compatible with Tsunami Bilge Mk2
Kit Includes (1 each):
90-degree outlet
Straight outlet
Washer
Non-return/check valve
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Low Profile Group 24 Adjustable Battery TrayThis battery tray is made of heavy-duty, non-corrosive black plastic. The tray includes an adjustable-height crossbar and two retaining bolts.Features:
Meets ABYC Standard E-10 and U.S. Coast Guard requirements
Patented design
Install with #10 fasteners
Specifications:
Battery Series: 24/24M
Inside Dimensions: 10-5/8" x 7-1/4" x 8-1/2"
Quick Guide (pdf)
Heavy Duty Group 27 Battery TrayThis heavy-duty battery tray is made of non-corrosive black plastic. The tray includes an adjustable-height crossbar and stainless steel retaining bolts.Features:
Meets ABYC Standard E-10 and U.S. Coast Guard requirements
Install with #10 fasteners
Specifications:
Inside Dimensions: 12" L x 6-7/8" W
Battery Series: 27/27M
Quick Guide (pdf)
Heavy Duty Group 24 Battery TrayThis heavy-duty battery tray is made of non-corrosive black plastic. The tray includes an adjustable-height crossbar and stainless steel retaining bolts.Features:
Meets ABYC Standard E-10 and U.S. Coast Guard requirements
Install with #10 fasteners
Specifications:
Inside Dimensions: 10-7/16" L x 6-7/8" W
Battery Series: 24/24M
Quick Guide (pdf)
29/31 Battery Tray with StrapsA simple-to-install battery holder that fits into limited spaces. This tray is for batteries up to 10-1/2 inches in height. Provide a simple installation for changing or replacing batteries.Features:
The polypropylene hold-down strap has a positive-locking, quick-disconnect buckle
Molded base mounts with four #10 Panhead fasteners
Specifications:Inside Dimensions: 12-7/8" L x 7" W Quick Guide (pdf)
Group 27 Battery Tray with StrapsA simple-to-install battery holder that fits into limited spaces. This tray is for batteries up to 10-1/2 inches in height. Provide a simple installation for changing or replacing batteries.Features:
The polypropylene hold-down strap has a positive-locking, quick-disconnect buckle
Molded base mounts with four #10 Panhead fasteners
Specifications:Inside Dimensions: 12-3/8" L x 7-1/8" W Quick Guide (pdf)
Group 24 Battery Tray with StrapsA simple-to-install battery holder that fits into limited spaces. This tray is for batteries up to 10-1/2 inches in height. Provide a simple installation for changing or replacing batteries.Features:
The polypropylene hold-down strap has a positive-locking, quick-disconnect buckle
Molded base mounts with four #10 Panhead fasteners
Specifications:Inside Dimensions: 7" L x 11" W Quick Guide (pdf)
PowerGuard PRO Battery BoxExperience the difference between PowerGuard PRO Series Battery Protection
Upward-facing vents let gases out while reducing water in-take by 94% - vs. PowerGuard 27 Series
Polypropylene composite material is impervious to acid leaks and other external factors
Engineered spill channels direct water away from the battery
With PowerGuard PRO, the battery is always within reach
Folding entry panels provide easy access to the battery terminals without the need to remove the mounting strap
A versatile bidirectional design allows contact from any angle
Ergonomic handles provide more comfort when transporting the battery
PowerGuard PRO takes security seriously
Reinforced mounting hardware ensures the battery and box stay anchored
Spacer blocks are removable to fit Group 24, 27, and 31 batteries
The snap-locking lid gives confidence that the battery will remain secure
Specifications:
Dimensions with Lid Installed - Internal Dimensions (L x W x H): 13-1/8" x 7" x 11"
Outside Dimensions (L x W x H): 21" x 11-1/4" x 11-1/2"
Color/Style: Black/Vented
Quick Guide (pdf)
Heavy-Duty Battery Tray - 29/31 Battery SeriesThis heavy-duty Attwood battery tray is for a group 29 or group 31 battery and is made of non-corrosive black plastic.Features:
Includes an adjustable-height crossbar and stainless steel retaining bolts
Meets ABYC Standard E-10 and U.S. Coast Guard requirements
Install with #10 fasteners
Specifications:Inside Dimensions (L x W): 13-1/16" L x 6-7/8" W Quick Guide (pdf)
Soft Grip 13" Steering WheelThis is the ideal steering wheel for bass boats, sport boats, and runabouts. The steering wheel has a patented design that provides a comfortable and firm grip. Also, this steering wheel has contemporary styling with a soft, black PVC outer rim and a high-impact, one-piece plastic inner core. It fits all standard 3/4-inch tapered shafts and conforms to ABYC P-22 and ISO 8848.Features:
Resists UV rays to prevent fading
Soft Grip is non-magnetic, so it will not interfere with compass readings
3-3/8 inch deep dish
8315 NMMA “As Approved”: 090071; CE Certificate WATT004
Specifications:Center Cap: Black plastic Specifications:
Diameter (Inches): 13"
Box Dimensions: 4"H x 13"W x 14"L WT: 2.75 lbs
UPC: 022697831545
Quick Guide (pdf)
Sure-Grip Stainless Steel Rod Holder - 4" & 5-Degree AngleAttwood’s line of Sure-Grip Steel Rod Holders is the perfect complement to Attwood’s molded Pro-Series and Heavy-Duty Adjustable rod holders. They are designed for drift fishing, pan fishing, crappie, and more. The 3/8-inch diameter coated steel rod is tough, strong, and corrosion-resistant. Also, the UV-resistant plastic coating protects the rod butt and handle.Specifications:
Angle: 5-degrees
Stem Length: 4 inches with wing nut
Use for: Horizontal rod position
Includes: 5071 mounting base
Specifications:
Construction: Stainless Steel
Length (Inches): 4"
Box Dimensions: 3"H x 7"W x 10"L WT: 0.7 lbs
UPC: 022697506030
Quick Guide (pdf)
Fold-N-Stow Fishing Net - MediumFold down for convenient and compact storage or extend for added reach with this Attwood Fold-N-Stow Fishing Net. This net is large enough to be used in a variety of fishing applications.Features:
Constructed of durable, knot-free netting
A flip of the handle opens and locks the net into place
Easily pull back the trigger, and the net collapses down into a stowable size
Specifications:
Size: Medium
Fully Extended (L x W x D): 47" x 16" x 16"
Specifications:
Length (Inches): 47"
Width: 16"
Box Dimensions: 1"H x 4"W x 14"L WT: 0.5 lbs
UPC: 022697127730
Heavy-Duty Adjustable Rod Holder with Combo Mount - White This rod holder is designed for use with baitcasting and spinning reels.Features:
An ergonomic design and easy-to-find rapid-release latch
Large, easy-grip lock-nut that offers an easy 180-degree vertical adjustment range for a variety of rod tip height settings
Specifications:Color: White*Sold as an Individual Quick Guide (pdf)
2-In-1 Non-Adjustable Rod Holders *2-PackThese two rod holders have a fixed vertical angle to optimize rod positioning and a smaller size is perfect for medium and light action gear. Features:
Rod throat opening fits most standard and ultra-light rods up to 1-3/16 inches in diameter
The locking ring fits the spinning reel handle shanks up to 7/16-inch diameter
Specifications:
Mount: Side
Color: Black
*Includes two-rod holders Quick Guide (pdf)
Swivl-Eze Seat Swivel 7" Black with 3° TiltSwivl-Eze has the boating experience to deliver all the kinds of accessories you want.Features:
360° ball-bearing seat swivel (requires weight or pressure to turn)
5-1/4" universal mounting hole pattern
Tilt Angle: 0°
Black powder coat finish
Tsunami Mk2 T1200 Aerator - 12V - 90-Degree InletKeep bait and fish alive with the Tsunami Aerator Mk2. Attwood’s leading fish-friendly technology is making it easier to install and service while offering new installation options never provided by the Tsunami range.Features:
3-1/2" x 1-1/8" thru-hull
Flexible installation with both 90 and straight inlets and outlets
Full backward compatibility with previous Tsunami models
Faster, smarter installation with no sealant or tools is required
Specifications:Flow Gallon/Hour: 1200 Specifications:
Gallons Per Hour: 1200
Inlet Style: Angled
Volts: 12v
Box Dimensions: 4"H x 8"W x 9"L WT: 1.5 lbs
UPC: 022697025456
