Quick-Release Transom Tie-Down Straps 2" x 4' PairWhen properly secured to transom eyes and trailer, transom straps reduce vertical and lateral movement to safely secure the boat to the trailer. They also reduce the bouncing of the boat on the trailer pads or rollers. Two inches wide for larger tailorable boats.Specifications:
2 inches wide
4 ft. long
Webbing:
Strong webbing
Resists rot, oils, gasoline, and most chemicals
Buckle:
Quick-Release (Over-Center) buckle
Strong and secure, yet easy to use
Quick tightening
Cinch tight and secure by depressing buckle handle
Release by lifting the buckle handle
Hook:
Vinyl-Coated S-Hook to prevent scratching boat or trailer finish
Corrosion resistant
Heavy-gauge
Special Features:
Protective pad behind the buckle to prevent marring and scratches on gel coat and painted surfaces
Hook-N-Loop closure secures the buckle handle in the locked position
Specifications:
Diameter (Inches): 2"
Length (Feet): 4'
Box Dimensions: 4"H x 6"W x 8"L WT: 1.75 lbs
UPC: 022697152329
Quick Guide (pdf)
Trailer Bunk Padding 12" x 12'12 ft. long roll of durable, weather-resistant polypropylene marine carpet material. Easy to cut and custom fit. Features:
12 inches wide
Protects hull
Eases loading and launching
Charcoal color
Acrylic backing grips the surface of trailer bunk boards or cradle
No excessive fuzz, static-free
Made for minimal water retention
Quick Guide (pdf)
Fold-Up Trailer Jack - 1500 lb Capacity - Dual WheelFits 3 inch x 5 inch tongue and swings up and out of the way. Swing-up jack has a convenient sidewind handle and TWO tough 6 inch diameter polypropylene wheels.Features:Corrosion-resistant, zinc-plated steel tubingSpecifications:
Travel lift (inch): 12"
Lift (inch): 26"
Specifications:
Lift Capacity: 1500
Operation Method: Manual
Box Dimensions: 6"H x 8"W x 23"L WT: 18 lbs
UPC: 022697111265
Quick Guide (pdf)
Fold-Up Trailer Jack - 1000 lb Capacity - Single WheelFits 3 inch x 5 inch tongue and swings up and out of the way. Swing-up jack has a convenient sidewind handle and a tough 6 inch diameter polypropylene wheel.Features:Corrosion-resistant, zinc-plated steel tubingSpecifications:
Travel lift (inch): 10"
Lift (inch): 24"
Specifications:
Lift Capacity: 1000
Operation Method: Manual
Box Dimensions: 7"H x 7"W x 22"L WT: 13.95 lbs
UPC: 022697111272
Quick Guide (pdf)
2000 lb Dual Drive Winch - 2" x 20' Nylon StrapDual drive enhances the pulling capacity by distributing the load equally to two sets of gears. Eliminates frame torque. 2,000-lb. load capacity with 4.1:1 gear ratio. Features:
Three-position pawl provides forward, neutral, and reverse operations
Black EDC finish. Molded, textured roller grip
Includes 2 in x 20 ft. nylon web strap with zinc-plated snap hook
Specifications:
Gear Ratio: 4:1:1
Manual/Electric: Manual
Pull Strength (lbs): 2000
Box Dimensions: 5"H x 7"W x 8"L WT: 8.8 lbs
UPC: 048903111959
Quick Guide (pdf)
1200 lb Single Drive Winch - 2" x 20' Nylon StrapSolid gear construction with precise gear tooth engagement. 1,200-lb. load capacity with 4.1:1 gear ratio. Three position pawl provides forward, neutral, and reverse operations. Features:
Black EDC finish
Molded, textured roller grip
Includes 20 ft. long nylon web strap with zinc-plated snap hook
Specifications:
Gear Ratio: 4:1:1
Manual/Electric: Manual
Pull Strength (lbs): 1200
Box Dimensions: 6"H x 7"W x 9"L WT: 6.8 lbs
UPC: 048903111492
Quick Guide (pdf)
Submersible LED Low-Profile Trailer Light KitIdeal replacement or upgrade for most trailers. Conforms to applicable U.S. FMVSS and Canadian CFMVSS standards.Kit Includes:
Includes (2) multi-functional (stop/tail/turn) submersible low-profile LED trailer lights
License plate bracket
Wiring harness and installation hardware
Specifications:
LED: Yes
Box Dimensions: 4"H x 11"W x 11"L WT: 2.65 lbs
UPC: 022697406477
Quick Guide (pdf)
Submersible LED Trailer Light KitFor use with trailers under 80 inches wide. Conforms to applicable U.S. FMVSS and Canadian CFMVSS standards.Kit Includes:
(2) multi-functional (stop/tail/turn) submersible LED trailer lights
License plate bracket
Wiring harness and installation hardware
Specifications:
LED: Yes
Box Dimensions: 4"H x 11"W x 12"L WT: 2.65 lbs
UPC: 022697140654
Quick Guide (pdf)
Low-Profile Submersible Trailer Light KitLow profile for trailers over 80 inches wide. Ideal replacement lights for most boat trailers. Conforms to applicable U.S. FMVSS and Canadian CMVSS safety standards. Kit Includes:
(2) multi-function lamps
Wiring harness
License plate bracket and mounting hardware
Specifications:
LED: No
Box Dimensions: 4"H x 11"W x 11"L WT: 2.9 lbs
UPC: 022697140630
Quick Guide (pdf)
Submersible Trailer Light KitApplicable to trailers under 80 inches wide. Ideal for utility, snowmobile, camping, motorcycle, and boat trailers. Design conforms to applicable US FMVSS and Canadian CMVSS safety standards.Complete Kit Includes: A pair of 8-function stop/tail/turn lights, wiring harness, and license plate bracket Specifications:
LED: No
Box Dimensions: 5"H x 9"W x 15"L WT: 2.4 lbs
UPC: 022697140609
Quick Guide (pdf)
Letter & Number Kit - BlackFeatures:
3-inch, waterproof vinyl, pressure-sensitive labels
Resists fuel, fading, and scratches
Kit contains (Black Pieces): Four of each letter and number, plus twelve dashes totaling 148 pieces
*Meets USCG guidelines Quick Guide (pdf)
Letter & Number Kit - WhiteFeatures:
3-inch, waterproof vinyl, pressure-sensitive labels
Resists fuel, fading, and scratches
Kit contains (White Pieces): Four of each letter and number, plus twelve dashes totaling 148 pieces
*Meets USCG guidelines Quick Guide (pdf)
Zig-Zag Fender Hanger - Pair with 4' Fender LinesNo need for knots in your fender lines. Keeps fenders in place with a simple system. Put a line over the rail and weave it through the zig-zag teeth.Features:
Pair, 4 ft. fender lines included
Quick and easy to use
Quick Guide (pdf)
Mooring Fender Lock Kit - Stainless Steel PairStainless Steel Fender Lock Kit 11575-3 makes hanging or moving fenders quick and easy. The two-part kit is easy to install with stainless steel screws or bolts (not included). Tie fenders to the key part of the kit then twist into the deck plate to secure fenders to the gunwale. No need to untie and retie fenders when moving or docking; just twist the key for installation or removal.Features:
Accepts up to 1/2-inch diameter fender line
Stainless steel construction and includes mounting hardware
Includes two flush-mount stainless steel mounting plates and two stainless steel keys
Quickly and easily install or move fenders when mooring
Dimensions:
Width: (inch) 2"
Height: (inch) 1"
*Line sold separately Quick Guide (pdf)Owner's Manual (pdf)
Portable Low Profile Fuel Tank - 12 Gallon with GaugeAttwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Tough materials and innovative design stand up to harsh marine conditions. A 12-gallon tank is ideal for pontoon boats where more fuel capacity is needed. Includes gauge and low profile save space.Features:
12 Gallon fuel capacity
Compatible with 1/4-inch NPT fuel fittings
High-Contrast, easy to read gage
Save space; the low profile is 3 inches lower than regular 12-gallon tanks
Additional oil and ullage/vapor capacity
EPA Cap with automatic, high-flow vacuum valve
UV-grade multi-layer tank material
Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems
Cap with built-in vacuum valve means no need for manual venting
Meets EPA and CARB (California Air Resources Board) regulations
Complies with all ABYC/NMMA requirements for portable marine fuel tanks
Dimensions:
Length: (inch) 24"
Width: (inch) 18"
Height: (inch) 11.61"
*No fuel line included Quick Guide (pdf)
Portable Fuel Tank - 12 Gallon with GaugeAttwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Tough materials and innovative design stand up to harsh marine conditions. A 12-gallon tank is ideal for pontoon boats where more fuel capacity is needed. Includes gauge.Features:
12 Gallon fuel capacity
Compatible with 1/4-inch NPT fuel fittingsHigh-Contrast, easy to read gage
Additional oil and ullage/vapor capacity
EPA Cap with automatic, high-flow vacuum valve
UV-grade multi-layer tank material
Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems
Cap with built-in vacuum valve means no need for manual venting
Meets EPA and CARB (California Air Resources Board) regulations
Complies with all ABYC/NMMA requirements for portable marine fuel tanks
Dimensions:
Length: (inch) 22.75"
Width: (inch) 14.25"
Height: (inch) 14.47"
*No fuel line included Quick Guide (pdf)
Portable Fuel Tank - 12 Gallon without GaugeAttwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Tough materials and innovative design stand up to harsh marine conditions. A 12-gallon tank is ideal for pontoon boats where more fuel capacity is needed.Features:
12 Gallon fuel capacity
Compatible with 1/4-inch NPT fuel fittings
Additional oil and ullage/vapor capacity
EPA Cap with automatic, high-flow vacuum valve
UV-grade multi-layer tank material
Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems
Cap with built-in vacuum valve means no need for manual venting
Meets EPA and CARB (California Air Resources Board) regulations
Complies with all ABYC/NMMA requirements for portable marine fuel tanks
Dimensions:
Length: (inch) 22.75"
Width: (inch) 14.25"
Height: (inch) 14.47"
*No gauge or fuel line included Quick Guide (pdf)
Portable Fuel Tank - 3 Gallon with GaugeAttwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Tough materials and innovative design stand up to harsh marine conditions. A 3-gallon tank is perfect for small outboards. Includes gauge.Features:
3 Gallon fuel capacity
Compatible with 1/4-inch NPT fuel fittingsHigh-Contrast, easy to read gage
Additional oil and ullage/vapor capacity
EPA Cap with automatic, high-flow vacuum valve
UV-grade multi-layer tank material
Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems
Cap with built-in vacuum valve means no need for manual venting
Meets EPA and CARB (California Air Resources Board) regulations
Complies with all ABYC/NMMA requirements for portable marine fuel tanks
Dimensions:
Length: (inch) 16.6"
Width: (inch) 11.45"
Height: (inch) 7.3"
*No fuel line included Quick Guide (pdf)
Portable Fuel Tank - 3 Gallon without GaugeAttwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Tough materials and innovative design stand up to harsh marine conditions. A 3-gallon tank is perfect for small outboards.Features:
3 Gallon fuel capacity
Compatible with 1/4-inch NPT fuel fittings
Additional oil and ullage/vapor capacity
EPA Cap with automatic, high-flow vacuum valve
UV-grade multi-layer tank material
Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems
Cap with built-in vacuum valve means no need for manual venting
Meets EPA and CARB (California Air Resources Board) regulations
Complies with all ABYC/NMMA requirements for portable marine fuel tanks
Dimensions:
Length: (inch) 16.6"
Width: (inch) 11.45"
Height: (inch) 7.3"
*No gauge or fuel line included Quick Guide (pdf)
Straight Fuel Vent - Black PolypropyleneA fuel vent, vents air from a fuel tank as it's being filled. This straight fuel vent is patented splash-resistant and corrosion-resistant polypropylene. Meets ABYC ventilation specifications.Features:
Straight Vent
Color: Black
Material: Polypropylene
Specifications:
Hose Size: (inch) 5/8" inner diameter
Maximum Hull Thickness: (inch) 7/8"
Installation Hole Size (inch) 3/4"
*Attwood fuel tank vents meet or exceed U.S. Coast Guard regulations Quick Guide (pdf)
Deck Fill Replacement Cap & ChainThis Attwood Replacement Cap and Chain is made for Attwood deck fills. The flush cap is slotted for a separate key and features an O-ring that seals the cap watertight. Features:Cap is attached by a stainless steel beaded chainSpecifications (Cap and Chain are Fitted for This Deck Fill Size):
3-1/4 (inch) Fill Neck Length
1-7/8 (inch) installation hole size
3-inch flange size
Fits 1-1/2 (inch) I.D. Hose
*Key sold separately Quick Guide (pdf)
Gasoline Deck Fill - 1-1/2 inch Stainless Steel AlloyFor 1-1/2 (inch) inner diameter hose. This deck fill is imprinted and color-coded to specify GASOLINE. The flush cap is slotted for a separate key and features an O-ring that seals the cap watertight. Cap is attached by a stainless steel, beaded chain. Long neck accommodates thick deck laminations. Key sold separately.Features:
Highly-polished finish
“Gasoline” imprint with Red Color Code (Not for use with EPA Certified systems)
Specifications:
3-1/4 (inch) Fill Neck Length
1-7/8 (inch) installation hole size
3-inch flange size
Fits 1-1/2 (inch) I.D. Hose
*Requires a bonding wire to prevent sparking when the nozzle is inserted on gasoline and diesel models per USCG and ABYC H-24 requirements Quick Guide (pdf)
Gear Lube PumpThis Attwood Gear Lube Pump offers a universal fit so it can be used with the greatest number of engines. This pump is intended for use with a 32-ounce gear lube bottle, and it fits nearly any outboard or sterndrive. It comes with 1 Yamaha adapter.Features:
Fits nearly any outboard or sterndrive
Easy to install
Quick Guide (pdf)
Fuel/Oil Mixing BottleAllows the addition of the exact amount of oil required for a 2-cycle engine. Oil level marks are in gallons and liters. Determines ratios for 100:1, 50:1, 24:1 and 10:1 mixes. Wide mouth, quart-size bottle.Features:
Markings to mix oil for 2 Cycle engine
Convenient wide-mouth, quart-size bottle
Clear oil level marks in black
Quick Guide (pdf)
