Universal Sprayless Connector - Male & FemaleSafely eliminate dangerous spraying of fuel when connecting or disconnecting pressurized hoses during fueling or maintenance. Comes complete with a thread-sealer for fast, easy installation; no additional supplies are required.Features:
8838HF6 Female Hose Fitting and 8838TM6 Male Threaded Tank Fitting
Pre-applied fuel-grade thread sealant prevents fuel leaks
Include check valves that automatically close upon disconnecting
High fuel flow fitting (less than .25kPa restriction at 50 liters/hour)
Compatible with Ethanol blended fuels
High-strength body engineered to withstand tough marine environments
Pre-applied fuel-grade thread sealant prevents leaks and saves you time
Compatible with 3/8 inch fuel lines, Ethanol blended fuels, and all original equipment manufacturer (OEM) brand engines
Can be used with portable generators and other portable fuel tanks
*Meets all EPA and CARB (California Air Resources Board) requirements
Primer Bulb - 1/4" Inner Diameter HoseThis Atwood Primer Bulb is engineered and constructed to deliver the most reliable priming and long-term leak-free performance. The exclusive three-layer construction prevents collapse under vacuum and prevents ballooning or bursting under pressure. The low-permeation material prevents fuel evaporation, and this bulb delivers 60 percent more output per pump than leading competitors.Features:
It is intended for use with a 1/4-inch interior diameter hose
Exclusive high-efficiency check-valves deliver faster priming and low fuel restriction (less than 1kPa restriction at 50 liters/hour)
Engineered hose barbs and stainless steel stepless clamps ensure leak-free performance
This bulb is compatible with Ethanol blended fuels, and it is EPA and CARB certified
Specifications:
ID Diameter (inches): 1/4"
Box Dimensions: 2"H x 4"W x 5"L WT: 0.3 lbs
UPC: 022697931474
Primer Bulb - 5/16" Inner Diameter HoseThis Atwood Primer Bulb is engineered and constructed to deliver the most reliable priming and long-term leak-free performance. The exclusive three-layer construction prevents collapse under vacuum and prevents ballooning or bursting under pressure. The low-permeation material prevents fuel evaporation, and this bulb delivers 60 percent more output per pump than leading competitors.Features:
It is intended for use with a 5/16-inch interior diameter hose
Exclusive high-efficiency check-valves deliver faster priming and low fuel restriction (less than 1kPa restriction at 50 liters/hour)
Engineered hose barbs and stainless steel stepless clamps ensure leak-free performance
This bulb is compatible with Ethanol blended fuels, and it is EPA and CARB certified
Specifications:
ID Diameter (inches): 5/16"
Box Dimensions: 5"H x 5"W x 5"L WT: 0.55 lbs
UPC: 022697935168
Quick Guide (pdf)
Primer Bulb - 3/8" Inner Diameter HoseThis Atwood Primer Bulb is engineered and constructed to deliver the most reliable priming and long-term leak-free performance. The exclusive three-layer construction prevents collapse under vacuum and prevents ballooning or bursting under pressure. The low-permeation material prevents fuel evaporation, and this bulb delivers 60 percent more output per pump than leading competitors.Features:
It is intended for use with a 3/8-inch interior diameter hose
Exclusive high-efficiency check-valves deliver faster priming and low fuel restriction (less than 1kPa restriction at 50 liters/hour)
Engineered hose barbs and stainless steel stepless clamps ensure leak-free performance
This bulb is compatible with Ethanol blended fuels, and it is EPA and CARB certified
Specifications:
ID Diameter (inches): 3/8"
Box Dimensions: 3"H x 5"W x 7"L WT: 1.3 lbs
UPC: 022697930385
Quick Guide (pdf)
Blue LED Micro Light with Stainless Steel Bezel & Vertical MountThis Attwood LED Micro Light is a compact and versatile light source that can be installed in numerous locations. Each one delivers industry-leading light output from an extremely compact package. The electropolished stainless steel cover adds an appealing bright finish to a boat, and this light is durable with its fully sealed electronics. It will endure and perform in the harshest conditions, and it can be used in locations such as rod storage boxes without risk of water damage. It can also be mounted under a hardtop or to a rail. Features:
0.66-watt draw at 12 volts DC
Blue LEDs
Rated for 50,000+ hours of use
Specifications:
Bulb Type: LED
Housing: Stainless
LED Color: Blue
Voltage - Input Range (Volts): 12v
Box Dimensions: 1"H x 4"W x 5"L WT: 0.1 lbs
UPC: 022697263506
Quick Guide (pdf)
White LED Micro Light with Stainless Steel Bezel & Vertical MountThis Attwood LED Micro Light is a compact and versatile light source that can be installed in numerous locations. Each one delivers industry-leading light output from an extremely compact package. The electropolished stainless steel cover adds an appealing bright finish to a boat, and this light is durable with its fully sealed electronics. It will endure and perform in the harshest conditions, and it can be used in locations such as rod storage boxes without risk of water damage. It can also be mounted under a hardtop or to a rail. Features:
0.66-watt draw at 12 volts DC
White LEDs
Rated for 50,000+ hours of use
Specifications:
Bulb Type: LED
Housing: Stainless
LED Color: White
Voltage - Input Range (Volts): 12v
Box Dimensions: 1"H x 4"W x 5"L WT: 0.1 lbs
UPC: 022697463500
Quick Guide (pdf)
LightArmor Extreme High Performance (HPX) Underwater Light - 12 LED & BlueEnsuring the highest quality performance, this 6-inch Light Armor surface mount underwater LED incorporates the very latest technology to provide maximum life cycles, minimal heat exposure, and incredible brightness. The sleek housing with a low profile design requires minimal mounting hardware. Unique heat sink cooling system with active overheat protection, reverse polarity protection, fully-sealed waterproof electronics, and impact-resistant lens further enhance unsurpassed durability.Features:
12V and 24V DC systems
Intelligently engineered for strength and durability
Exclusive Heat-Sync Cooling System with Active Overheat Protection
Resistant to corrosion, chemicals, and UV damage
Extreme impact-resistant lens
3 ft. sheathed wire
Reverse polarity protection
Fully sealed waterproof electronics
Simple installation with minimal mounting hardware
Low-profile design
Electro-polished 316 stainless steel cover (Optional for OEM)
CE certified
Specifications:
Fixture Lumens: 5,000
Current Draw at 13.6V: 2.59
Current Draw at 24V: 1.30
*All Light Armor Underwater lights must be mounted under water line. Only works underwater. Specifications:
Color: Blue
Material: Stainless Steel
Mounting Style: Surface
Box Dimensions: 3"H x 7"W x 11"L WT: 0.6 lbs
UPC: 022697662125
Quick Guide (pdf)
LightArmor Extreme High Performance (HPX) Underwater Light - 3 LED & BlueEnsuring the highest quality performance, this 4-inch Light Armor surface mount underwater LED incorporates the very latest technology to provide maximum life cycles, minimal heat exposure, and incredible brightness. The sleek housing with a low profile design requires minimal mounting hardware. Unique heat sink cooling system with active overheat protection, reverse polarity protection, fully-sealed waterproof electronics, and impact-resistant lens further enhance unsurpassed durability.Features:
12V and 24V DC systems
Intelligently engineered for strength and durability
Exclusive Heat-Sync Cooling System with Active Overheat Protection
Resistant to corrosion, chemicals, and UV damage
Extreme impact-resistant lens
3 ft. sheathed wire
Reverse polarity protection
Fully sealed waterproof electronics
Simple installation with minimal mounting hardware
Low-profile design
Electro-polished 316 stainless steel cover (Optional for OEM)
CE certified
Specifications:
Fixture Lumens: 1,350
Current Draw at 13.6V: 0.64
Current Draw at 24V: 0.32
*All Light Armor Underwater lights must be mounted under water line. Only works underwater. Specifications:
Color: Blue
Material: Stainless Steel
Mounting Style: Surface
Box Dimensions: 3"H x 7"W x 11"L WT: 0.5 lbs
UPC: 022697660039
Quick Guide (pdf)
PowerBase Light - Automated Light MountThe intelligent, automated folding light base. PowerBase easily stows and deploys lights and antennas with the push of a button.PowerBase is the only intelligent light/antenna with object detection technology:
SafeGuard Breakaway: In the event of an impact, the powerbase will safely return to a stowed position preventing potential damage to the fiberglass top
SmartDeploy Backdrive: In the event of a blocked deployment, PowerBase senses an obstruction and reverses the light/antenna back to its starting position
PowerBase is designed for worry-free installation and operation from the assembly line to the marina:
Standardized mounting patterns allow for upgradeability
Intuitive control without switch limitations
PowerBase is compatible/built with the leading industry equipment:Available in masthead and all-round configurations featuring Attwood’s LightArmor LED technology (PowerBase Light)Compatibility:Compatible with Attwood LightArmor LED All-Round and Masthead Nav LightsRequired for installation (not included):
7/32” & 3/4” Drill Bits
#2 Phillips Driver
Marine Grade Sealant
PTFE Lubricant
2x 1-1/4” Fender Washers and 10-24
Nuts (If Through-Hole Mounting)
2-Position SPST Switch (with LED Backlight)
PowerBase Light not included
Quick Guide (pdf)Owner's Manual (pdf)
PowerBase Antenna - White Powered Fold-Down Antenna BaseThe intelligent, automated folding Antenna base. PowerBase easily stows and deploys lights and antennas with the push of a button.PowerBase is the only intelligent light/antenna with object detection technology:
SafeGuard Breakaway: In the event of an impact, the powerbase will safely return to a stowed position preventing potential damage to the fiberglass top
SmartDeploy Backdrive: In the event of a blocked deployment, PowerBase senses an obstruction and reverses the light/antenna back to its starting position
PowerBase is designed for worry-free installation and operation from the assembly line to the marina:
Standardized mounting patterns allow for upgradeability
Intuitive control without switch limitations
PowerBase is compatible/built with the leading industry equipment:For use with antennas up to 8 ft. In length (Powerbase Antenna)Compatibility:Compatible with all leading 1-1/4" threaded VHF Antennas (8ft or less in length)Required for installation (not included):
7/32” & 3/4” Drill Bits
#2 Phillips Driver
Marine Grade Sealant
PTFE Lubricant
2x 1-1/4” Fender Washers and 10-24
Nuts (If Through-Hole Mounting)
2-Position SPST Switch (with LED Backlight)
PowerBase Antenna not included
Quick Guide (pdf)Owner's Manual (pdf)
All-Round Deck Mount LightThe Deck Mount Light has 7-inch leads for connection to a 12V DC power supply. Also, the bayonet lock secures the lens and cover to the base, providing easy lamp replacement. Light mounts flush, making it ideal for installation atop the tow piece on ski or wakeboard boat towers.Features:
Includes a 9W wedge base lamp
Installs directly to deck with two required #10 fasteners
Deck mount
Black
*Does not have a raised base Specifications:
Housing: Black
Lens Color: Clear
Voltage - Input Range (Volts): 12
Box Dimensions: 5"H x 5"W x 5"L WT: 0.55 lbs
UPC: 022697594075
Quick Guide (pdf)
Pulsar Bi-Color 2-Pin Stowaway Light - 10"AngledAttwood offers a variety of durable, stowaway, combination pole-mounted sidelights for bow mounting. Each features an anodized aluminum pole that raises the light head for visibility above trolling motors, anchors, or other equipment on the bow. When not in use, lights can be removed from the base and stowed, so they won’t interfere with fishing or anchoring.Features:
1-mile, 225° light visibility for boats up to 39.4 ft. (12 m)
Includes 9W wedge base lamp
2-Pin Locking-Collar Pole
Specifications:Pole Length: (inch) 10" Angled*Locking collar design is compatible only with LightArmor Plug-In Bases Specifications:
Lens Color: Red/Green
Visible Range (Miles): 1
Box Dimensions: 3"H x 6"W x 17"L WT: 0.35 lbs
UPC: 022697911070
Quick Guide (pdf)
Pulsar Bi-Color 2-Pin Stowaway Light - 10" StraightAttwood offers a variety of durable, stowaway, combination pole-mounted sidelights for bow mounting. Each features an anodized aluminum pole that raises the light head for visibility above trolling motors, anchors, or other equipment on the bow. When not in use, lights can be removed from the base and stowed, so they won’t interfere with fishing or anchoring.Features:
1-mile, 225° light visibility for boats up to 39.4 ft. (12 m)
Includes 9W wedge base lamp
2-Pin Locking-Collar Pole
Specifications:Pole Length: (inch) 10" straight*Locking collar design is compatible only with LightArmor Plug-In Bases Specifications:
Visible Range (Miles): 1
Box Dimensions: 3"H x 5"W x 16"L WT: 0.4 lbs
UPC: 022697921079
Quick Guide (pdf)
LightArmor Fast Action Bi-Color Pole Light - 14" & 2-PinPremium LED lights with a flexible, impact-resistant composite pole make these perfect for anglers and hunters to maneuver through low-hanging obstacles. The subtle, glare-free black matte finish complements many of today’s boat designs.Features:
ISO 19009:2015 Certified
Impact-resistant polycarbonate lens
Water-resistant
Corrosion and UV-resistant
LED light engines last for 50,000 hours
2-pin and locking collar
Specifications:Pole Length (inch): 14"*Locking collar design is compatible only with LightArmor Plug-In Bases Specifications:
Housing: Black
LED: Yes
Lens Color: Red/Green
Box Dimensions: 3"H x 6"W x 22"L WT: 0.45 lbs
UPC: 022697021625
Quick Guide (pdf)
Livewell/Bailer Drain Plug - 1/2"A clockwise turn of the handle tightens the plug and the lever flips down to lock. This plug is ideal for livewell drains.Features:
Cam-action neoprene plugs snap shut to form a stopper for livewells/baitwells
Brass snaps and plates
1/2" inner diameter thru-hull
*Not for use with chemicals or fuels Specifications:
Construction: Brass
Box Dimensions: 1"H x 2"W x 5"L WT: 0.1 lbs
UPC: 022697753335
Quick Guide (pdf)
Snap-Handle Stainless Steel Drain Plug - 1" DiameterA clockwise turn of the handle tightens the plug in its tube, and the handle flips down to lock.Features:
Handle: Stainless Steel
For 1" diameter drains
*Sold as an Individual Specifications:
Construction: Stainless Steel
Box Dimensions: 1"H x 3"W x 7"L WT: 0.5 lbs
UPC: 022697752079
Quick Guide (pdf)
Snap-Handle Brass Drain Plug - 1" DiameterA clockwise turn of the handle tightens the plug in its tube, and the handle flips down to lock.Features:
Handle: Brass
For 1" diameter drains
*Sold as an Individual Specifications:
Construction: Brass
Box Dimensions: 2"H x 3"W x 6"L WT: 0.1 lbs
UPC: 022697752475
Quick Guide (pdf)
T-Handle Brass Drain Plug - 1" DiameterThe T-Handle Drain Plugs are simply operated by a clockwise and counterclockwise turn of the T-handle, which expands and releases the drain plug.Features:
Handle: Brass
For 1" diameter drains
*Sold as an Individual Specifications:
Construction: Brass
Box Dimensions: 1"H x 2"W x 6"L WT: 0.1 lbs
UPC: 022697752673
Quick Guide (pdf)
Stainless Steel Garboard Drain Plug - 7/8" DiameterThe Garboard Drain Plug is a threaded removable plug, which has a retention system that keeps the plug from getting lost. Features:
High-polished #316 stainless steel reduces corrosion
Large 7/8" (27mm) hole for servicing stern drives
*Gasket not included Specifications:
Construction: Stainless Steel
Box Dimensions: 2"H x 3"W x 5"L WT: 0.3 lbs
UPC: 022697075574
Quick Guide (pdf)
White Plastic 90 Degree Thru-Hull Connector - 1-1/8" Inner Diameter90° Thru-Hulls are ideal for tight installations, such as livewell overflow drains. The angled design also eliminates hose kinking.Specifications:
Fits Hose Size: (inch) 1-1/8"inner diameter
Max Hull Thickness: (inch) 1-7/8"
Flange Diameter: (inch) 2-7/16"
Installation Hole Size: (inch) 1-5/16"
Drain Plug: (inch) 7/8"
Color: White
*Plastic Thru-Hull Connectors are designed for installation above the water line only Specifications:
Hose Size: 1-1/8"
Material: Plastic
Box Dimensions: 2"H x 4"W x 7"L WT: 0.25 lbs
UPC: 022697387936
Quick Guide (pdf)
White Plastic 90 Degree Thru-Hull Connector - 3/4" Inner Diameter90° Thru-Hulls are ideal for tight installations, such as livewell overflow drains. The angled design also eliminates hose kinking.Specifications:
Fits Hose Size: (inch) 3/4"inner diameter
Max Hull Thickness: (inch) 1"
Flange Diameter: (inch) 1-1/2"
Installation Hole Size: (inch) 1"
Drain Plug: (inch) 1/2"
Color: White
*Plastic Thru-Hull Connectors are designed for installation above the water line only Specifications:
Hose Size: 3/4"
Material: Plastic
Box Dimensions: 1"H x 2"W x 3"L WT: 0.2 lbs
UPC: 022697387738
Quick Guide (pdf)
Stainless Steel Scupper Valve Barbed - 1-1/2" Hose SizePolish your image with these beautiful, durable stainless steel fittings. Why specify plastic parts when these fittings will last the life of the boat?Rugged Stainless Construction:
Cast from certified Enhanced 316 Stainless Steel alloy for strength and lifetime corrosion-resistance
All visible areas are polished to a mirror finish, then passivate each part for additional protection
Thick steel sidewalls withstand continual stress and hose flexing
Faster, Simpler Installation:
Each Scupper Valve is available with a new silicone gasket
A channel under the flange holds a bead of sealant, making it easier to apply a trouble-free seal
All models have wrench flats or an end notch to hold as a gripping surface; one installer can tighten all connections from inside the hull
The barbed tail ends provide plenty of room to hold multiple clamps
Stainless Steel Scupper Valves, Barbed:
The Scupper Flap is tough neoprene rubber with a molded V that fits into the grooved body to reduce backwash
Fasteners are concealed and corrosion-proof
Specifications:
Hose size: (inch) 1-1/2" inner diameter
Thread Diameter: (inch) 1-7/8"
Flange O.D. (outside diameter): (inch) 3"
Thread Length: (inch) 3-1/2"
Barb Length: (inch) 1-1/2"
Total Length: (inch) 5-1/2"
Install Hole Saw Size: (inch) 2"
Thread NPSM: (inch) 1-1/2"
Max Hull Thickness: (inch) 3"
*Stainless Steel Thru-Hull Connectors are designed for installation above the water line only Specifications:
Hose Size: 1-1/4"
Material: Stainless Steel
Box Dimensions: 3"H x 3"W x 6"L WT: 3 lbs
UPC: 022697665539
Quick Guide (pdf)
Stainless Steel Thru-Hull Standard Straight Barbed - 1-1/2" Inner DiameterPolish your image with these beautiful, durable stainless steel fittings. Why specify plastic parts when these fittings will last the life of the boat?Rugged Stainless Construction:
Cast from certified Enhanced 316 Stainless Steel alloy for strength and lifetime corrosion-resistance
All visible areas are polished to a mirror finish, then passivate each part for additional protection
Thick steel sidewalls withstand continual stress and hose flexing
Faster, Simpler Installation:
Each Thru-Hull is available with a new silicone gasket
A channel under the flange holds a bead of sealant, making it easier to apply a trouble-free seal
All models have wrench flats or an end notch to hold as a gripping surface; one installer can tighten all connections from inside the hull
The barbed tail ends provide plenty of room to hold multiple clamps
Stainless Steel Straight Thru-Hulls, BarbedStandard Thread model has a full-length thread for thick hulls and easy tighteningSpecifications:
Hose size: (inch) 1-1/2" inner diameter
Flange Diameter: (inch) 3"
Thread O.D. (outside diameter): (inch) 1-7/8"
Thread Length: (inch) 2-1/2"
Barb Length: (inch) 1-1/4"
Total Length: (inch) 4-1/8"
Install Hole Saw Size: (inch) 2"
Thread NPSM: (inch) 1-1/2"
Max Hull Thickness: (inch) 1-7/8"
*Stainless Steel Thru-Hull Connectors are designed for installation above the water line only Specifications:
Hose Size: 1-1/2"
Material: Stainless Steel
Box Dimensions: 3"H x 5"W x 8"L WT: 1.55 lbs
UPC: 022697665515
Quick Guide (pdf)
Stainless Steel Thru-Hull Standard Straight Barbed - 1-1/8" Inner DiameterPolish your image with these beautiful, durable stainless steel fittings. Why specify plastic parts when these fittings will last the life of the boat?Rugged Stainless Construction:
Cast from certified Enhanced 316 Stainless Steel alloy for strength and lifetime corrosion-resistance
All visible areas are polished to a mirror finish, then passivate each part for additional protection
Thick steel sidewalls withstand continual stress and hose flexing
Faster, Simpler Installation:
Each Thru-Hull is available with a new silicone gasket
A channel under the flange holds a bead of sealant, making it easier to apply a trouble-free seal
All models have wrench flats or an end notch to hold as a gripping surface; one installer can tighten all connections from inside the hull
The barbed tail ends provide plenty of room to hold multiple clamps
Stainless Steel Straight Thru-Hulls, BarbedStandard Thread model has a full-length thread for thick hulls and easy tighteningSpecifications:
Hose size: (inch) 1-1/8" inner diameter
Flange Diameter: (inch) 2-1/4"
Thread O.D. (outside diameter): (inch) 1-3/8"
Thread Length: (inch) 2-3/8"
Barb Length: (inch) 1-1/4"
Total Length: (inch) 3-7/8"
Install Hole Saw Size: (inch) 1-1/4"
Thread NPSM: (inch) 1"
Max Hull Thickness: (inch) 1-3/4"
*Stainless Steel Thru-Hull Connectors are designed for installation above the water line only Specifications:
Hose Size: 1-1/8"
Material: Stainless Steel
Box Dimensions: 2"H x 4"W x 7"L WT: 0.85 lbs
UPC: 022697665492
Quick Guide (pdf)
