Premium Aeration Micro DiffuserMineral deposits and hard water use can clog your Aqua-Life® diffuser and produce less than adequate aeration quality. Keep your Aqua-Life® aeration system running at peak efficiency by replacing hoses and oxygen diffusers on a regular basis.Features:
Micro-bubble diffuser and hose assembly
7.5" x 5.5" x 1.5"
Specifications:
Width: 6"
Length (Inches): 8"
Height: 2"
Box Dimensions: 2"H x 6"W x 8"L WT: 0.3 lbs
UPC: 082271114297
Tsunami Mk2 T800 Aerator 12V 3/4" NPT InletKeep bait and fish alive with the Tsunami Aerator Mk2. Attwood’s leading fish-friendly technology is making it easier to install and service while offering new installation options never provided by the Tsunami range.Features:
7/8 in. x 3/4 in. seacock
Flexible installation with both 90 and straight inlets and outlets
Full backward compatibility with previous Tsunami models
Faster, smarter installation with no sealant or tools is required
Specifications:Flow Gallon/Hour: 800 Specifications:
Gallons Per Hour: 800
Volts: 12v
Box Dimensions: 4"H x 5"W x 8"L WT: 1.15 lbs
UPC: 022697025524
Tsunami MK2 Manual Bilge Pump - T500 - 500 GPH & 12VThe Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump.Easy Installation & Service
GPH (Gallons Per Hour): 500
90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation
Backward compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps
External mounting feet and integrated outlet reduces time and effort
Service pump cartridges from hard-to-reach areas using only one hand
Specifications:
Rated Volts DC: 12V
Fuse Size: 3 Amp
Wire Length: (inch) 29" / (mm) 735
Hose Diameter: (inch) 3/4" and 1"
*Must be used with appropriate Tsunami outlet Specifications:
Gallons Per Hour: 500 GPH
Operation: Non-Automatic
Outlet Size: 3/4" or 1"
Type: Electric
Volts: 12v
Box Dimensions: 4"H x 6"W x 7"L WT: 0.8 lbs
UPC: 022697023971
Quick Guide (pdf)
Tsunami Mk2 T1200 Aerator - 12V - 1" NPT InletKeep bait and fish alive with the Tsunami Aerator Mk2. Attwood’s leading fish-friendly technology is making it easier to install and service while offering new installation options never provided by the Tsunami range.Features:
7/8" x 1" seacock
Flexible installation with both 90 and straight inlets and outlets
Full backward compatibility with previous Tsunami models
Faster, smarter installation with no sealant or tools is required
Specifications:Flow Gallon/Hour: 1200 Specifications:
Gallons Per Hour: 1200
Volts: 12v
Box Dimensions: 4"H x 5"W x 8"L WT: 1.2 lbs
UPC: 022697025555
Tsunami Mk2 T500 Aerator - 12V - 90-Degree InletKeep bait and fish alive with the Tsunami Aerator Mk2. Attwood’s leading fish-friendly technology is making it easier to install and service while offering new installation options never provided by the Tsunami range.Features:
3-1/2 in. x 3/4 in. thru-hull
Flexible installation with both 90 and straight inlets and outlets
Full backward compatibility with previous Tsunami models
Faster, smarter installation with no sealant or tools is required
Specifications:Flow Gallon/Hour: 500 Specifications:
Gallons Per Hour: 500
Inlet Style: Angled
Volts: 12v
Box Dimensions: 4"H x 8"W x 9"L WT: 1.1 lbs
UPC: 022697025432
WaterBuster® Portable PumpPart #: 4140-4This patented, submersible pump is a great way to remove unwanted water from boats, pool covers, aquariums and sump pits. Convenient and safe, too, because it needs no electrical cord - runs up to 5 hours on three alkaline D batteries. Excellent for use as a portable pump-out device for paddle boats, inflatables, duck boats, dingies and kayaks. Any craft that lacks a hard-wire, permenent electrical system.Features:
6-3/8" high x 5-1/4"
Pumps up to 200 gallons per hour
Includes 42" hose with garden-hose adapter for adding longer hose
Lifts water to height of 40
Note: Not to be used as a permanent bilge pump. Specifications:
Gallons Per Hour: 200 GPH
Type: Electric
Box Dimensions: 6"H x 6"W x 7"L WT: 2.2 lbs
UPC: 022697414045
Quick Guide (pdf)
Tsunami Mk2 T500 Aerator - 12V - 3/4" NPT InletKeep bait and fish alive with the Tsunami Aerator Mk2. Attwood’s leading fish-friendly technology is making it easier to install and service while offering new installation options never provided by the Tsunami range.Features:
7/8 in. x 3/4 in. seacock
Flexible installation with both 90 and straight inlets and outlets
Full backward compatibility with previous Tsunami models
Faster, smarter installation with no sealant or tools is required
Specifications:Flow Gallon/Hour: 500 Specifications:
Gallons Per Hour: 500
Volts: 12v
Box Dimensions: 4"H x 5"W x 8"L WT: 0.8 lbs
UPC: 022697025494
Straight Barbed All-Purpose Drain - White1-3/8" White Concaive Head Drain. These molded drains, available in straight and 90-degree versions, offer a low-cost method to drain water from virtually anywhere. They have a very low-profile concave head to allow complete drainage. Drains mount easily in a 1-3/8" diameter hole and are secured with the molded nut that is included. Hose barbs fit a 3/4" hose for routing of drainage.Specifications:
Color: White
Fits Hole Diameter: 1-3/8"
Water Connection: 3/4" Hose
Scupper Flapper Repair KitThe flapper scupper repair kit should take care of any flapper replacement job. The traditional flapper scuppers use molded rubber flappers that curl and deform over time, requiring replacement to prevent leaking. Our flappers are not rubber, but are molded of a thermoplastic elastomer that is resistant to UV and the elements, so they do not curl like the rubber flappers.Repairs most scuppers with flappers, regardless of manufacturer.Kit Contains: All parts needed to repair 2 scuppers of a given size. Each kit contains 2 each of: 1-5/8" flappers, 1-7/8" flappers, and all necessary keepers and fasteners.
Sahara MK2 S800 Bilge Pump 800 GPH - 12V - AutomaticEngineered for extended service life, these pumps feature a cool-running design and quality components, including permanent magnet motors, stainless steel shafts, and steel-reinforced seals.Features:
Sahara Mk2 is the only automatic bilge pump that eliminates air-locks
Patented X-Air™ Impeller ejects trapped air in the pump and pipework.
Sahara Mk2 is the easiest automatic bilge pump to install and service
External mounting feet and integrated outlet reduces time and effort.
Universal mounting pattern makes replacement simple.
Service pump cartridge from hard-to-reach areas using only one hand.
Sahara Mk2 is the most reliable automatic bilge pump in freshwater and saltwater applications
Attwood’s SteadySwitch™ reduces cycling and extends the life of the pump.
40% better protection against water ingress and electrolysis - vs. MK1.
2X better protection against water ingress and electrolysis - than the leading competition.
Universal mounting patterns make it backwards compatible with the most popular bilge pumps on the market.
Specifications:
Type: Electric
Outlet Size: 3/4" or 1"
Operation: Automatic
Volts: 12v
Gallons Per Hour: 800 GPH
Box Dimensions: 4"H x 6"W x 7"L WT: 1.35 lbs
UPC: 022697023469
Owner's Manual (pdf)Brochure (pdf)
Aqua Life AeratorFeatures:
Water-resistant booted switch
Single-speed piston pump
Metal universal hanging clip
Includes hose and stone
Operates on 4 AA batteries
Sahara MK2 S1200 Bilge Pump 1200 GPH - 12V - AutomaticEngineered for extended service life, these pumps feature a cool-running design and quality components, including permanent magnet motors, stainless steel shafts, and steel-reinforced seals.Features:
Sahara Mk2 is the only automatic bilge pump that eliminates air-locks
Patented X-Air™ Impeller ejects trapped air in the pump and pipework.
Sahara Mk2 is the easiest automatic bilge pump to install and service
External mounting feet and integrated outlet reduces time and effort.
Universal mounting pattern makes replacement simple.
Service pump cartridge from hard-to-reach areas using only one hand.
Sahara Mk2 is the most reliable automatic bilge pump in freshwater and saltwater applications
Attwood’s SteadySwitch™ reduces cycling and extends the life of the pump.
40% better protection against water ingress and electrolysis - vs. MK1.
2X better protection against water ingress and electrolysis - than the leading competition.
Universal mounting patterns make it backwards compatible with the most popular bilge pumps on the market.
Specifications:
Gallons Per Hour: 1200 GPH
Operation: Automatic
Outlet Size: 1" or 1-1/8"
Volts: 12v
Type: Electric
Box Dimensions: 4"H x 6"W x 7"L WT: 1.35 lbs
UPC: 022697023483
Owner's Manual (pdf)Brochure (pdf)
Sahara MK2 S500 Bilge Pump 500 GPH - 12V - AutomaticEngineered for extended service life, these pumps feature a cool-running design and quality components, including permanent magnet motors, stainless steel shafts, and steel-reinforced seals.Features:
Sahara Mk2 is the only automatic bilge pump that eliminates air-locks
Patented X-Air™ Impeller ejects trapped air in the pump and pipework.
Sahara Mk2 is the easiest automatic bilge pump to install and service
External mounting feet and integrated outlet reduces time and effort.
Universal mounting pattern makes replacement simple.
Service pump cartridge from hard-to-reach areas using only one hand.
Sahara Mk2 is the most reliable automatic bilge pump in freshwater and saltwater applications
Attwood’s SteadySwitch™ reduces cycling and extends the life of the pump.
40% better protection against water ingress and electrolysis - vs. MK1.
2X better protection against water ingress and electrolysis - than the leading competition.
Universal mounting patterns make it backwards compatible with the most popular bilge pumps on the market.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Type: Electric
Outlet Size: 3/4" or 1"
Operation: Automatic
Volts: 12v
Gallons Per Hour: 500 GPH
Box Dimensions: 4"H x 6"W x 7"L WT: 1.25 lbs
UPC: 022697023452
Owner's Manual (pdf)Brochure (pdf)
Tsunami MK2 T500 Manual Bilge Pump with Installation Kit - 500 GPH & 12VThis is a complete kit (includes a bilge pump) to install a manual bilge pump with a 3/4" I.D. hose outlet. The Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump. Kit Includes:
Attwood Tsunami Mk2 500 GPH Pump
Washer / Non-Return Valve
90-degree Outlet
Straight Outlet
3/4" x 5' Pump Hose
3/4" Thru-hull fitting
2-way on/off switch with bezel plate
Snap-It hose clamps
Wire Kit
Installation Kit
Easy Installation & Service:
GPH (Gallons Per Hour): 500 GPH
90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation
Backward compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps
External mounting feet and integrated outlets reduce time and effort
Service pump cartridges from hard-to-reach areas using only one hand
Specifications:
Rated Volts DC: 12VDC
Fuse Size: 3 AMP
Wire Length: (inch) 29" / (mm) 735mm
Hose Diameter: (inch) 3/4" and 1"
*Caution: Bilge pump switches are not external ignition protected Specifications:
Gallons Per Hour: 500 GPH
Operation: Non-Automatic
Outlet Size: 3/4" or 1"
Type: Electric
Volts: 12v
Box Dimensions: 6"H x 7"W x 9"L WT: 1.75 lbs
UPC: 022697024213
Quick Guide (pdf)
Float SwitchPart #: 4202-7Converts bilge pumps to fully automatic operation. Maximum amp draw is 12 amps (at 12-volt D.C.) or 6-amps (at 24-Volts D.C.). Features a compact, low profile design that mounts on any surface from a horizontal up to a 24x angle. Incorporates a reliable and affordable mechanical switch that actuates pump motor at 2" water level. Wire leads do not flex or hinge with the float as on some competitive models. Integral cover dampens bilge sloshing to reduce pump cycling, and prevents debris interference. Sealed switch mechanism resists moisture, fume-ignition, and electrical shock. Contains no mercury, which is listed as a health hazard and "Persistent Toxic Substance" in over 26 states.Float switch installs directly onto the rear slots of the V-Series pump bracket. Features a convenient test knob to test pump operation.Features:
36" Wire
12V & 24V
CE Rated
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Volts: 12/24v
Type: Switches
Box Dimensions: 3"H x 6"W x 9"L WT: 0.4 lbs
UPC: 022697420275
Quick Guide (pdf)
Service Kit for S500 & S800 Bilge PumpsSpecifications:
Outlet Diameter: 3/4" (19mm) & 1" (25mm)
Compatible with Tsunami Bilge Mk2
Kit Includes (1 each):
90-degree outlet
Straight outlet
Washer
Non-return/check valve
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Turbo 4000 Series II In-Line BlowerPart #: 1749-4Attwood's improved Turbo 4000 Series II sets the standard for in-line blower performance. Utilizing advanced fan blade design techniques, Attwood has developed a blower system that matches air flow of existing in-line blowers at a significantly reduced noise level. The first vane axial-flow fan bilge blowers designed using aerospace technology to maximize performance. No other bilge blowers in the industry provide such powerful system output at such a low power input in a compact size.Patented in-line design - provides ventilation for engine compartments, galleys, bilges, and heads. Mounting feet allow vertical or horizontal installation in confined spaces. Install with #10 fasteners. Individual carton includes 2 tie straps. All are CE certified. 16-gauge tinned and caulked copper wire leads.Features:
Nickel-plated motor can for corrosion resistance
Stiffening ribs to reduce housing distortion
Motor cap to seal wires and motor for water resistance
Five-blade fan maximize airflow and efficiency
Tabs in intake and exhaust hold ventilation hose/clamp firmly in place
Low amp draw motor for longer blower and battery life
Built-in mounting feet allow easy vertical or horizontal install
3-Year Warranty
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Ducting: 4"
Open Flow (CFM): 200 CFM
Volts: 12v
Box Dimensions: 5"H x 5"W x 6"L WT: 1.1 lbs
UPC: 022697174949
Quick Guide (pdf)Brochure (pdf)
Tsunami MK2 Manual Bilge Pump - T800 - 800 GPH & 12VThe Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump.Easy Installation & Service
GPH (Gallons Per Hour): 800
90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation
Backward compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps
External mounting feet and integrated outlet reduces time and effort
Service pump cartridges from hard-to-reach areas using only one hand
Specifications:
Rated Volts DC: 12V
Fuse Size: 4 Amp
Wire Length: (inch) 29" / (mm) 735
Hose Diameter: (inch) 3/4" and 1"
*Must be used with appropriate Tsunami outlet Specifications:
Gallons Per Hour: 800 GPH
Operation: Non-Automatic
Outlet Size: 3/4" or 1"
Type: Electric
Volts: 12v
Box Dimensions: 4"H x 5"W x 7"L WT: 1.2 lbs
UPC: 022697023988
Quick Guide (pdf)
Bilge Enclosed Pump Float SwitchEnsure your boat's safety and efficiency with the T-H Marine Bilge Pump Float Switch, designed for automatic activation of your bilge pump. Built for durability in harsh conditions, this reliable float switch integrates easily into your existing system. Specifications:
Type: Switches
Box Dimensions: 3"H x 3"W x 6"L WT: 0.4 lbs
Heavy-Duty Bilge Pump 1700 SeriesPart #: 4730-4Heavy-Duty Bilge Pumps integrate the highest quality bearings, brushes, alloys and magnets designed to withstand extreme usage cycles. Pump all employs an exclusive shaft and motor compartment, reducing wear and significantly extending pump life. Advanced resin compositions incorporated in exterior to resist chemicals such as engine oil, aggressive detergents and hose plasticizers. Attwood's Heavy Duty bilge has unsurpassed durability and efficiency in a compact design to ensure electrical energy is converted to the pump rather than excess heat.The perfect upgrade from 1500 GPH rated pumps especially older and over-rated designs. Easily replaces 2000 GPH rated pumps. Delivers a true 1700 GPH at open flow while drawing less than 6-amps.Features:
12V
CE Rated
36" Wire
3-Year Warranty
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Gallons Per Hour: 1700 GPH
Operation: Non-Automatic
Outlet Size: 1-1/8"
Volts: 12v
Type: Electric
Box Dimensions: 6"H x 6"W x 7"L WT: 2.4 lbs
UPC: 022697437044
Quick Guide (pdf)Brochure (pdf)
Heavy-Duty Bilge Pump 2000 SeriesPart #: 4760-4Heavy-Duty Blige Pumps integrate the highest quality bearings, brushes, alloys and magnets designed to withstand extreme usage cycles. Pump all employs an exclusive shaft and motor compartment, reducing wear and significantly extending pump life. Advanced resin compositions incorporated in exterior to resist chemicals such as engine oil, aggressive detergents and hose plasticizers. Attwood's Heavy Duty bilge has unsurpassed durability and efficiency in a compact design to ensure electrical energy is converted to the pump rather than excess heat.Attwood's highest capacity pump! Ball-bearing design provides for cooler motor operation and longer life, Delivers over 2000 GPH at open flow while drawing less than 7-amps.Features:
12V
CE Rated
36" Wire
3-Year Warranty
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Gallons Per Hour: 2000 GPH
Operation: Non-Automatic
Outlet Size: 1-1/8"
Volts: 12v
Type: Electric
Box Dimensions: 6"H x 7"W x 7"L WT: 2.4 lbs
UPC: 022697476043
Quick Guide (pdf)Brochure (pdf)
Sahara MK2 S800 Bilge Pump 800 GPH - 24V - AutomaticEngineered for extended service life, these pumps feature a cool-running design and quality components, including permanent magnet motors, stainless steel shafts, and steel-reinforced seals.Features:
Sahara Mk2 is the only automatic bilge pump that eliminates air-locks
Patented X-Air™ Impeller ejects trapped air in the pump and pipework.
Sahara Mk2 is the easiest automatic bilge pump to install and service
External mounting feet and integrated outlet reduces time and effort.
Universal mounting pattern makes replacement simple.
Service pump cartridge from hard-to-reach areas using only one hand.
Sahara Mk2 is the most reliable automatic bilge pump in freshwater and saltwater applications
Attwood’s SteadySwitch™ reduces cycling and extends the life of the pump.
40% better protection against water ingress and electrolysis - vs. MK1.
2X better protection against water ingress and electrolysis - than the leading competition.
Universal mounting patterns make it backwards compatible with the most popular bilge pumps on the market.
Specifications:
Volts: 24v
Type: Electric
Outlet Size: 3/4" or 1"
Operation: Automatic
Gallons Per Hour: 800 GPH
Box Dimensions: 2"H x 4"W x 8"L WT: 1.5 lbs
UPC: 022697023476
Owner's Manual (pdf)Brochure (pdf)
Double Barb Inline Scupper Check Valve - 1-1/8" - BlackA great solution to provide a scupper check valve in the drain line. Allows use of standard thru-hull fittings in the cockpit and on the hull exterior. Features:
Prevents Backwash
Chemical Resistant Materials
Thermo-Plastic Flapper
Specifications:
Construction: Polymer
Box Dimensions: 4"H x 6"W x 9"L WT: 0.35 lbs
UPC: 733572065008
