22 Free Swimmer Bite'N' Run 8000 Spinning Reel - FRSW8000A return to the foray of Bite’N’Run reels with Daiwa’s new FREE SWIMMER BR. Bite’N’Run is a key technology for keen live or dead bait anglers allowing fish to take baits under minimal line tension to ensure a solid hookset is achieved. Designed in collaboration between Daiwa USA, Daiwa Australia, Daiwa New Zealand, and alongside Japanese engineers, FREE SWIMMER BR is a product five years in the making and a testament to Daiwa’s commitment to providing the best products to suit local conditions.Anglers will set the Bite’N’Run tension by adjusting the dial on the bottom of the reel, a wide range can be set to suit unweighted baits for finicky feeders such as whiting, up to quite strong settings suitable to live baiting large baits for hard-fighting predators like Kingfish & Mackeral. FREE SWIMMER BR is built off a strong & sturdy carbon composite frame and Air Rotor. The internals has been carefully sealed through careful design and implementation of rubber seals to make FREESWIMMER a true Saltwater Bite’N’Run reel. Careful attention to detail was paid throughout the design and prototype stages to make FREE SWIMMER BR capable of handling even the largest of New Zealand Kingfish & Snapper. FREE SWIMMER BR is equipped with a host of regular Daiwa technologies including Air Rotor, ATD Drag, Tough Digigear & more to round out the best-performing Bite’N’Run reel Daiwa has ever produced.BITE N RUNBite’N’Run is a key technology for keen live or dead bait anglers allowing fish to take baits under minimal line tension to ensure a solid hook set is achieved. The rear drag can be easily adjusted to provide optimum tension for each scenario.AIR ROTORLighter, stronger, and more balanced than any rotor system that’s come before, ‘Air Rotor’ delivers a great leap forward in rotor design and function and delivers the ultimate line roller support. Made from Zaion and featuring a redesigned arch that disperses pressure to the lower section of the rotor to reduce stressing and flexing, the design is further enhanced with a hollowed-out construction reducing weight while increasing reel sensitivity and rotational balance.ATD DRAGDaiwa’s Automatic Tournament Drag uses an improved drag grease that exhibits a low viscosity at rest, yet becomes more viscous immediately after drag starts up. This reduces initial drag start-up inertia and combined with the structural changes of the ATD Drag System results in a smoother drag from the initial hook up.TOUGH DIGIGEARFurther evolution of its predecessor Digigear, Tough Digigear is our brand new digitally designed, machine-cut gearing system that ensures ultimate gear precision, rotational smoothness, and strength. Specifications:
Bearing Count: 4BB+1
Gear Ratio: 4.7
Handle Position: Left/Right
Max Drag: 22 lbs
Retrieve Rate: 3.1"
Series: Free Swimmer
Style: Spinning
Box Dimensions: 3"H x 4"W x 6"L WT: 2 lbs
UPC: 043178922446
Revo3® X SP30 Spinning ReelRedesigned from the ground up, the Revo X spinning reel has been engineered to deliver unmatched performance and durability. It combines a Zenon-inspired A-SYM body design to minimize the body size and optimize weight and balance with the AM-G fully machined gear systems for the ultimate in smoothness and cranking power. Casting performance is maximized by the V-Rotor design and Rocket line management system that allows anglers to fish mono, braid, and even difficult-to-manage fluorocarbon.Features:
6 stainless steel HPCR™ bearings + 1 roller bearing
Asymmetrical body design
V-Rotor design
V-Rotor design
Rocket line management™ system
Rocket spool lip design™
Machined aluminum braid-ready spool
Carbon Matrix™ drag system
Aluminum handle with co-molded soft touch knobs
AMG 2 gearing system
Stainless steel main shaft and components
Slow Oscillation
Specifications:
Series: Revo X
Style: Spinning
Box Dimensions: 4"H x 6"W x 6"L WT: 0.8 lbs
UPC: 036282106390
Brochure (pdf)
Revo3® X SP20 Spinning ReelRedesigned from the ground up, the Revo X spinning reel has been engineered to deliver unmatched performance and durability. It combines a Zenon-inspired A-SYM body design to minimize the body size and optimize weight and balance with the AM-G fully machined gear systems for the ultimate in smoothness and cranking power. Casting performance is maximized by the V-Rotor design and Rocket line management system that allows anglers to fish mono, braid, and even difficult-to-manage fluorocarbon.Features:
6 stainless steel HPCR™ bearings + 1 roller bearing
Asymmetrical body design
V-Rotor design
V-Rotor design
Rocket line management™ system
Rocket spool lip design™
Machined aluminum braid-ready spool
Carbon Matrix™ drag system
Aluminum handle with co-molded soft touch knobs
AMG 2 gearing system
Stainless steel main shaft and components
Slow Oscillation
Specifications:
Series: Revo X
Style: Spinning
Box Dimensions: 4"H x 6"W x 6"L WT: 0.8 lbs
UPC: 036282106383
Brochure (pdf)
Emcast BR LT Spinning Reel - ECLTBR5000-CThe Emcast Bite N’ Run feature allows the line to pay off the reel when a gamefish takes a live or natural bait. Once the line is paying off the reel, the refined Auto Clutch will put the reel in gear allowing a solid hook set. It is much more controlled than simply opening up the bail, the traditional method used when fishing natural baits with spinning reels. The reel designs are in the LT Concept of light yet tough. The Carbon Light Body is substantially lighter yet just as strong as traditional materials. To further the concept, the Air Rotor is also lighter yet just as strong. A slick Machined Aluminum Handle is powerful yet comfortable to the hand. When a gamefish is taking a bait offering and the reel is put in gear, the ATD or Advanced Tournament Drag System, utilizing a proprietary grease, allows the smooth payoff of line no matter how long the run. A 5.2 to 1 Gear Ratio shades the reel toward pulling power. If you are looking for an exciting reel tailored for the live and natural bait fisherman, look to the Emcast BR LT to put your presentation at the take.Specifications:
Bearing: 3BB + 1
Gear Ration: 5.2:1
Line Per Crank: 34.5
Weight (oz): 11.1
Mono Capacity: 14/250, 20/160
J Braid Capacity: 15/320, 20/280
Drag Max: 26.4
Specifications:
Bearing Count: 3+1
Gear Ratio: 5.2:1
Handle Position: Left/Right
Max Drag: 26.4 lbs
Retrieve Rate: 34.5"
Series: Emcast BR
Style: Spinning
Box Dimensions: 5"H x 6"W x 6"L WT: 1.2 lbs
UPC: 043178596043
Emcast BR LT Spinning Reel - ECLTBR4000-CThe Emcast Bite N’ Run feature allows the line to pay off the reel when a gamefish takes a live or natural bait. Once the line is paying off the reel, the refined Auto Clutch will put the reel in gear allowing a solid hook set. It is much more controlled than simply opening up the bail, the traditional method used when fishing natural baits with spinning reels. The reel designs are in the LT Concept of light yet tough. The Carbon Light Body is substantially lighter yet just as strong as traditional materials. To further the concept, the Air Rotor is also lighter yet just as strong. A slick Machined Aluminum Handle is powerful yet comfortable to the hand. When a gamefish is taking a bait offering and the reel is put in gear, the ATD or Advanced Tournament Drag System, utilizing a proprietary grease, allows the smooth payoff of line no matter how long the run. A 5.2 to 1 Gear Ratio shades the reel toward pulling power. If you are looking for an exciting reel tailored for the live and natural bait fisherman, look to the Emcast BR LT to put your presentation at the take.Specifications:
Bearing: 3BB + 1
Gear Ration: 5.2:1
Line Per Crank: 32.5
Weight (oz): 11.3
Mono Capacity: 12/160, 14/140
J Braid Capacity: 10/220, 15/185
Drag Max: 26.4
Specifications:
Bearing Count: 3+1
Gear Ratio: 5.2:1
Handle Position: Left/Right
Max Drag: 26.4 lbs
Retrieve Rate: 32.5"
Series: Emcast BR
Style: Spinning
Box Dimensions: 4"H x 6"W x 6"L WT: 1.35 lbs
UPC: 043178596029
Eliminator Spinning Reel - Eliminator5000 The Eliminator Series of Spinning Reels range from a compact 2500 series reel holding a 6-pound test to a beefy 8000 series reel that can pack on the 30-pound test. The reels are also Well Suited For Braided Line Applications. The reel body is constructed utilizing the Hardbodyz Concept. The Aluminum Frame and Sideplate combine to form a strong rigid housing for the state-of-the-art Digigears cut to smooth, precise standards. The attractive yet durable Anodized Finish is scratch and corrosion-resistant.The attractive yet durable Anodized Finish is scratch and corrosion-resistant. The Air Rotor design is 15-percent lighter yet more precisely balanced than competing reels. The stout Aluminum Spool can carry the increased pressures of braided lines and houses buttery smooth, long-lasting Felt Drags. Slide-in handles for easy left or right-hand crank conversion. Suitable for fresh and saltwater applications. If you are looking for a high-quality line of workhorse-like reels at a smart price, then you owe yourself a look at the ELIMINATOR SERIES SPINNING REELS.Specifications:
Bearing: 4BB + 1RB
Gear Ration: 5.7:1
Line Per Crank: 47.4
Weight (oz): 22.5
Mono Capacity: 14/470, 17/380, 20/280
J Braid Capacity: 50/360, 65/310
Drag Max: 17.6
Specifications:
Bearing Count: 4+1
Gear Ratio: 5.7:1
Handle Position: Left/Right
Max Drag: 17.6 lbs
Retrieve Rate: 47.4"
Series: Eliminator
Style: Spinning
Box Dimensions: 5"H x 7"W x 7"L WT: 1.8 lbs
UPC: 043178922415
Eliminator Spinning Reel - Eliminator4500 The Eliminator Series of Spinning Reels range from a compact 2500 series reel holding a 6-pound test to a beefy 8000 series reel that can pack on the 30-pound test. The reels are also Well Suited For Braided Line Applications. The reel body is constructed utilizing the Hardbodyz Concept. The Aluminum Frame and Sideplate combine to form a strong rigid housing for the state-of-the-art Digigears cut to smooth, precise standards. The attractive yet durable Anodized Finish is scratch and corrosion-resistant.The attractive yet durable Anodized Finish is scratch and corrosion-resistant. The Air Rotor design is 15-percent lighter yet more precisely balanced than competing reels. The stout Aluminum Spool can carry the increased pressures of braided lines and houses buttery smooth, long-lasting Felt Drags. Slide-in handles for easy left or right-hand crank conversion. Suitable for fresh and saltwater applications. If you are looking for a high-quality line of workhorse-like reels at a smart price, then you owe yourself a look at the ELIMINATOR SERIES SPINNING REELS.Specifications:
Bearing: 4BB + 1RB
Gear Ration: 5.7:1
Line Per Crank: 43.1
Weight (oz): 21.7
Mono Capacity: 14/350, 17/280, 20/210
J Braid Capacity: 40/340, 50/270
Drag Max: 17.6
Specifications:
Bearing Count: 4+1
Gear Ratio: 5.7:1
Handle Position: Left/Right
Max Drag: 17.6 lbs
Retrieve Rate: 43.1"
Series: Eliminator
Style: Spinning
Box Dimensions: 5"H x 7"W x 7"L WT: 1.9 lbs
UPC: 043178922408
Eliminator Spinning Reel - Eliminator4000 The Eliminator Series of Spinning Reels range from a compact 2500 series reel holding a 6-pound test to a beefy 8000 series reel that can pack on the 30-pound test. The reels are also Well Suited For Braided Line Applications. The reel body is constructed utilizing the Hardbodyz Concept. The Aluminum Frame and Sideplate combine to form a strong rigid housing for the state-of-the-art Digigears cut to smooth, precise standards. The attractive yet durable Anodized Finish is scratch and corrosion-resistant.The attractive yet durable Anodized Finish is scratch and corrosion-resistant. The Air Rotor design is 15-percent lighter yet more precisely balanced than competing reels. The stout Aluminum Spool can carry the increased pressures of braided lines and houses buttery smooth, long-lasting Felt Drags. Slide-in handles for easy left or right-hand crank conversion. Suitable for fresh and saltwater applications. If you are looking for a high-quality line of workhorse-like reels at a smart price, then you owe yourself a look at the ELIMINATOR SERIES SPINNING REELS.Specifications:
Bearing: 4BB + 1RB
Gear Ration: 5.7:1
Line Per Crank: 39.9
Weight (oz): 14.5
Mono Capacity: 10/300, 12/260, 14/210
J Braid Capacity: 30/280, 40/200
Drag Max: 17.6
Specifications:
Bearing Count: 4+1
Gear Ratio: 5.7:1
Handle Position: Left/Right
Max Drag: 17.6 lbs
Retrieve Rate: 39.9"
Series: Eliminator
Style: Spinning
Box Dimensions: 4"H x 6"W x 6"L WT: 1.25 lbs
UPC: 043178922392
